/ArduinoThread

A simple way to run Threads on Arduino

Primary LanguageArduino

ArduinoThread Logo

No, Arduino does not support "REAL" parallel tasks (aka Threads), but we can make use of this Library to improve our code, and easily schedule tasks with fixed (or variable) time between runs.

This Library helps to maintain organized and to facilitate the use of multiple tasks. We can use Timers Interrupts, and make it really powerfull, running "pseudo-background" tasks on the rug.

For example, I personaly use it for all my projects, and put all sensor aquisition and filtering inside it, leaving the main loop, just for logic and "cool" part.

Instalation

  1. "Download":https://github.com/ivanseidel/ArduinoThread/archive/master.zip the Master branch from gitHub.
  2. Unzip and modify the Folder name to "ArduinoThread" (Remove the '-master')
  3. Paste the modified folder on your Library folder (On your Libraries folder inside Sketchbooks or Arduino software).

If you are here, because another Library requires this class, just don't waste time reading bellow. Install and ready.

Getting Started

There are many examples showing many ways to use it. Here, we will explain Class itself, what it does and "how" it does.

There are basicaly, two Classes included in this Library: Thread and ThreadController (that inherits from Thread).

  • Thread class: This is the basic class, witch contains methods to set and run callbacks, check if the Thread should be runned, and also creates a unique ThreadID on the instantiation.

  • ThreadController class: Responsable for "holding" multiple Threads. Can also be called as "a group of Threads", and is used to perform run in every Thread ONLY when needed.

  • The instantiation of a Thread class is very simple:
Thread myThread = Thread();
// or, if initializing a pointer
Thread* myThread = new Thread();
  • Setting up a thread is essential. You can configure many things:
myThread.enabled = true; // Default enabled value is true
myThread.setInterval(10); // Setts the wanted interval to be 10ms
/*
	This is useful for debugging
	(Thread Name is disabled by default, to use less memory)
	(Enable it by definint USE_THREAD_NAMES on 'Thread.h')
*/
myThread.ThreadName = "myThread tag";
// This will set the callback of the Thread: "What should I run"?
myThread.onRun(callback_function); // callback_function is the name of the function

Ok, creating Threads are not so hard. But what do we do with them now?

  • First, let's see how Threads should work, to understand what a ThreadController is and does
// First check if our Thread "should" be runned
if(myThread.shouldRun()){
  // Yes, the Thread should be runned, let's run it
  myThread.run();
}

Now that you got the idea, let's think a little bit: What if i have 3, 5, 100 Threads. Do I need to check EACH one?!?

  • The answer is: NO. Create a ThreadController, and put all your boring-complex Threads inside it!
// Instantiate a new ThreadController
ThreadController controller = ThreadController();
// Now, put a bunch of Threads inside it, FEED it!
controller.add(&myThread); // Notice the & before the thread, IF it's not instantied as a pointer.
controller.add(&hisThread);
controller.add(&sensorReadings);
...
  • You have created, configured, grouped it. What is missing? Yes, whe should RUN it!
// call run on a Thread or a ThreadController to run it
controller.run();

This will run all the Threads that NEED to be runned.

Congratulations, you have learned the basics of ArduinoThread. If you want some TIPS, see bellow.

TIPs and Warnings

  • ThreadController is not a LinkedList. It's "MAXIMUM" size (the maximum Threads that it can store) is defined on ThreadController.h (default is 15)

  • !!!! VERY IMPORTANT !!!! When extending Thread class and implementing the function run(), always remember to put runned(); after all, otherwhise the Thread will ALWAYS run.

  • It's a good idea, to create a Timer interrupt and call a ThreadController.run() there. That way, you don't need to worry about reading sensors and doing time-sensitive stuff on your main code (loop). Check ControllerWithTimer example.

  • Inheriting from Thread or even ThreadController is always a good idea. For example, I always create base classes of sensors that extends Thread, so that I can "register" the sensors inside a ThreadController, and forget about really reading sensors, just getting theirs values within my main code. Checkout SensorThread example.

  • Remember that ThreadController is in fact, a Thread. If you want to enable or disable a GROUP of Threads, think about putting all of them inside a ThreadController, and adding this ThreadController to another ThreadController (YES! One ThreadController inside another). Check ControllerInController example.

  • Check the full example CustomTimedThread for a cool application of Threads that runs for a period, after a button is pressed.

  • Running tasks on the Timer interrupts must be tought REALLY carefully

    You cannot use "sleep()" inside a interrupt, because it will get into a infinite loop.

    Things must do stuff quickly. Waiting too loooong on a interrupt, means waiting too loooong on the main code (loop)

    Things might get "scrambled". Since Timers interrupts actualy "BREAK" your code in half and start running the interrupt, you might want to call noInterrupts and interrupts on places where cannot be interrupted:

noInterrupts();
// Put the code that CANNOT be interrupted...
interrupts(); // This will enable the interrupts egain. DO NOT FORGET!

Library Reference

You should know:

  • bool Thread::enabled - Enables or disables the Thread. (do not stop it from running, but will return false when shouldRun() is called)

  • void Thread::setInterval() - Setts the desired interval for the Thread (in Ms).

  • bool Thread::shouldRun() - Returns true, if the Thread should be runned. (Basicaly,the logic is: (reached time AND is enabled?).

  • void Thread::onRun(<function>) - The target callback function to be called.

  • void Thread::run() - This will run the Thread (call the callback function).

  • int Thread::ThreadID - Theoretically, it's the address of memory. It's unique, and can be used to compare if two threads are identical.

  • int Thread::ThreadName - A human-redable thread name. Default is "Thread ThreadID" eg.: "Thread 141515"; Note that to enable this attribute, you must uncomment the line that disables it on 'Thread.h';

  • protected: void Thread::runned() - Used to reset internal timer of the Thread. This is automaticaly called AFTER a call to run().

  • void ThreadController::run() - This will run the all Threads within the ThreadController, only if needed (if shouldRun returns true);

  • bool ThreadController::add(Thread* _thread) - This will add a the thread to the ThreadController, and return true if suceeded (it the array is full, returns false).

  • void ThreadController::remove(Thread* _thread) - This will remove the Thread from the ThreadController.

  • void ThreadController::remove(int index) - This will remove the thread on the position index.

  • void ThreadController::clear() - This will remove ALL threads from the ThreadController array.

  • void ThreadController::size(bool cached = true) - Returns how many Threads are allocated inside the ThreadController. If cached is false, will force the calculation of threads.

  • Thread* ThreadController::get(int index) - Returns the Thread on the position index.

You don't need to know:

  • Nothing, yet ;)

Version History

  • (Jun/2014): New Example: ControllerWithTimer
  • 1.0 (2013-05-11): Initial release.

ArduinoThread