The_Royal_Vitamins-Included_Case
A 3D-Printed Case for the Let's Split Vitamins Included Keyboard (Original Let's Split Keyboard by Wootpatoot)
These Cases were designed from the PCB Files graciously open-sourced by Duckle29 HERE ON GITHUB
You Will Need The Following Hardware to Assemble Each Side:
- x4 M2x6mm Heat Set Inserts (8 In Total)
- x4 M3x6mm Heat Set Inserts (8 In Total)
Both of these can be found HERE on Amazon.com in a Single Purchase item.
- x4 M2x12mm or M2x14mm Screws (8 In Total)
- x4 M3x4mm or M3x6mm Screws (8 In Total)
*Print is Designed to be .15mm Resolution or Higher.
*Plate is set at 1.6mm for Standard Thickness of Prefered Lasercut Manu. SendCutSend.com