TheCacophonyProject/thermal-recorder

Issues

• Test coverage!

  #7 opened 7 years ago by mjs
  2

• Add rate limiting to TakeSnapshot d-bus call

  #58 opened 5 years ago by mjs
  2

• LEDs don't turn off when recorder is stopped

  #45 opened 5 years ago by mjs
  2

• Gracefully handle /etc/thermal-uploader.yaml not being there

  #86 opened 5 years ago by mjs
  2

• Treat (0, 0) location as Christchurch for sunrise/sunset calcs

  #81 opened 5 years ago by mjs
  0

• Frame timing is not accurate

  #27 opened 6 years ago by mjs
  0

• Include when camera callibration (FFC) happens in the CPTV file

  #47 opened 6 years ago by mjs
  0

• Use github.com/TheCacophonyProject/window

  #46 opened 6 years ago by mjs
  1

• Force FCC at startup

  #24 opened 6 years ago by mjs
  1

• Option to disable motion detection

  #19 opened 6 years ago by mjs
  1

• Still getting stuck when opening CCI

  #42 opened 6 years ago by mjs
  3

• Reboot system if camera initialisation fails multiple times

  #50 opened 6 years ago by mjs
  2

• Add LICENSE file and license headers

  #10 opened 6 years ago by mjs
  1

• Add a test mode

  #13 opened 6 years ago by mjs
  0

• Emit frames leading up to motion detection event

  #22 opened 6 years ago by mjs
  2

• Add README

  #9 opened 6 years ago by mjs
  0

• Motion detection starts following camera power cycle

  #21 opened 6 years ago by mjs
  2

• Don't include timestamps in output

  #37 opened 7 years ago by mjs
  0

• Stop recording when disk space is low

  #36 opened 7 years ago by mjs
  0

• Add status LEDs

  #30 opened 7 years ago by CameronRP
  0

• Incomplete writes?

  #25 opened 7 years ago by mjs
  1

• Support recording time range window

  #26 opened 7 years ago by mjs
  0

• Remove .cptv.temp files on startup

  #23 opened 7 years ago by mjs
  0

• Reducing logging frequency

  #31 opened 7 years ago by mjs
  0

• Finalise documentation of CPTV format

  #1 opened 7 years ago by mjs
  1

• Check in systemd service config

  #20 opened 7 years ago by mjs
  1

• Configuration tweaks

  #6 opened 7 years ago by mjs
  0

• Switch to YAML config file

  #8 opened 7 years ago by mjs
  1

• Enable radiometric mode to get more consistent thermal readings

  #2 opened 7 years ago by mjs
  0

• Make movement detection parameters configurable

  #5 opened 7 years ago by mjs
  0

• Support maximum recording length

  #4 opened 7 years ago by mjs
  0

• Add configuration file support

  #3 opened 7 years ago by mjs
  1