TheGuyDanish/CM4_MATX

Issues

• Too much empty space on board

  #71 opened 2 years ago by erkinalp
  2

• Power wiring for PI7C PCI-e switch

  #28 opened 4 years ago by TheGuyDanish
  3

• ATX PSU Power Control

  #20 opened 4 years ago by garlick
  14

• Test Pads

  #58 opened 4 years ago by derwana
  2

• Is there a PIN jumper to affect BOOT mode?

  #67 opened 3 years ago by jcdutton
  1

• Suggest Display Port out instead of HDMI

  #68 opened 3 years ago by jcdutton
  1

• heat sink for CM4

  #53 opened 4 years ago by garlick
  8

• Fan connector

  #65 opened 4 years ago by erkinalp
  1

• Implementation of Pi-Standard 40-pin header

  #1 opened 4 years ago by mo-g
  30

• Variant with 12V only power input

  #61 opened 4 years ago by erkinalp
  1

• How hard is/was this project to implement?

  #60 opened 4 years ago by bhansconnect
  8

• audio and microphone jack

  #22 opened 4 years ago by derwana
  9

• ISA bus instead of extra pci?

  #56 opened 4 years ago by tannewt
  2

• No assigned footprints

  #52 opened 4 years ago by derwana
  2

• Assign passive component footprints

  #59 opened 4 years ago by TheGuyDanish
  1

• Possibly boards to look at

  #54 opened 4 years ago by ldrrp
  1

• Implement Real Time Clock

  #49 opened 4 years ago by TheGuyDanish
  3

• pci express lines need ac coupling caps

  #31 opened 4 years ago by HaasJona
  3

• refine project workflow

  #18 opened 4 years ago by garlick
  4

• Export KiCad design to Blender to generate a high-quality near-realistic render of the end product

  #14 opened 4 years ago by volkertb
  16

• More PCIe Lanes

  #11 opened 4 years ago by mo-g
  4

• Adding PoE Support

  #5 opened 4 years ago by derwana
  5

• Atx12vo

  #35 opened 4 years ago by ldrrp
  3

• voltage of GPIO_VREF not defined

  #42 opened 4 years ago by derwana
  2

• Errors in RJMG2012119A0NR.stp

  #38 opened 4 years ago by derwana
  3

• Adding Fan Control Circuitry

  #6 opened 4 years ago by derwana
  25

• uatx dimensions

  #32 opened 4 years ago by aep
  4

• Can I take your licence and registration, please?

  #10 opened 4 years ago by mo-g
  9

• CM4 symbol uses pin 116 twice and is missing pin 118

  #30 opened 4 years ago by HaasJona
  1

• Expose both a USB pin header and a USB-A socket internally

  #2 opened 4 years ago by mo-g
  4

• Expose SDIO as a header next to the I/O shield, not as a soldered SD Card slot

  #4 opened 4 years ago by mo-g
  6

• CM4_MATX.kicad_pcb has hard-coded Windows-specific links to SamacSys 3dshapes

  #19 opened 4 years ago by volkertb
  2

• Rebase the project to KiCad 5.1.8

  #17 opened 4 years ago by TheGuyDanish
  11

• Perhaps use open-ended PCIe x1 slots instead of PCIe x16 slots?

  #9 opened 4 years ago by volkertb
  10

• Show the latest PCB design as a linked image in the README

  #12 opened 4 years ago by geerlingguy
  0

• Consider a RTC solution that interfaces with USB, to save GPIO pins

  #8 opened 4 years ago by volkertb
  2

• Integrate an IEEE 1284 (Centronics) parallel port (not through a USB adapter)

  #3 opened 4 years ago by volkertb
  8