All of my custom keyboards, keymaps, and case files are stored here.
-
main - Case files and firmware for keyboards designed by me.
- Scotto9 - A 9 key handwired macropad.
- Scotto36 - A 36 key handwired ortholinear ergo keyboard.
- Scotto40 - A 37, 38, or 40 key handwired ortholinear keyboard.
- ScottoSlant - A 37key ~0.25u row staggered handwired keyboard.
- ScottoCMD - A 40 key handwired ortholinear keyboard with non-ortho bottom row.
- ScottoGame - A 42 key handwired ortholinear keyboard with game and action buttons.
- ScottoAlp - A 35 key ortholinear keyboard that supports MX and Alp switches.
- ScottoStarter - A 52 key ortholinear keyboard.
- ScottoFly - A 36 key column staggered ergonomic keyboard.
- ScottoInvader - A 36 key column staggered ortholinear keyboard.
- ScottoSplit - A 36 key column staggered split keyboard that uses VGA interconnects.
- Scotto34 - A 34 ortholinear board that uses choc switches and mounts the controller on top.
-
other - Case files designed by me for keyboards not designed by me. Also includes keymaps.
-
abandoned - Boards that I gave up on for any reason.
- ScottoCross - A 4x12 ortholinear board with a 7u spacebar. I got as far as printing it and then deciding that it wouldn't be very usable for me.
-
Can I sell any of these keyboards?
- No, absolutely not. I release these for free so people can build them, not sell them. Refer to the license below or on each keyboard for specifics.
-
Do you sell any of these keyboards?
- Yes. The project will always remain free but to support it and myself, I do offer cases, builds, and kits over at scottokeebs.com
-
Why do you use so many standoffs and screws in your builds?
- Since my boards use 3D printed plates, this gives them much better stability. It also helps improve stabilizer performance for keys that require them.
-
How exactly do I build a handwired keyboard?
- I made a video explaining everything you need to know.
-
Why is
qmk compile
not working?- This most likely means the board hasn't been merged into the qmk_firmware repo yet. If this is the case, you can simply copy the
QMK
folder intoqmk_firmware/keyboards/handwired/jscotto
and rename it to the respective keyboard.
- This most likely means the board hasn't been merged into the qmk_firmware repo yet. If this is the case, you can simply copy the
-
Can I have just the
.hex
firmware file?- Yes, in each keyboards
Firmware
directory there is a file calleddefault.hex
with my personal map for that board, typically in Colemak. There also might be variants of that keymap. You can use this with QMK Toolbox if you don't want to compile the firmware yourself or run into issues.
- Yes, in each keyboards
Keyboards by Joe Scotto is licensed under CC BY-NC-SA 4.0