The Sensu assets packaged from this repository are built against the Sensu ruby runtime environment. When using these assets as part of a Sensu Go resource (check, mutator or handler), make sure you include the corresponding Sensu ruby runtime asset in the list of assets needed by the resource. The current ruby-runtime assets can be found here in the Bonsai Asset Index.
check-disk-usage
Check disk capacity and inodes based upon the gem sys-filesystem.
Can adjust thresholds for larger filesystems by providing a 'magic factor'
(-m). The default, 1.0, will not adapt threshold percentages for volumes.
The -l option can be used in combination with the 'magic factor' to specify
the minimum size volume to adjust the thresholds for.
By default all mounted filesystems are checked.
The -x option can be used to exclude one or more filesystem types. e.g.
check-disk-usage.rb -x debugfs,tracefs
The -p option can be used to exlucde specific mount points. e.g.
check-disk-usage.rb -p /run/lxcfs
It's also possible to use regular expressions with the -x or -p option
check-disk-usage.rb -p '(\/var|\/run|\/sys|\/snap)'
Refer to check_mk's documentation on adaptive thresholds.
You can also visualize the adjustment using WolframAlpha with the following:
y = 100 - (100-P)*(N^(1-m))/(x^(1-m)), y = P for x in 0 to 1024
Where P = base percentage, N = normalize factor, and m = magic factor
check-fstab-mounts
Check the mount points in /etc/fstab to ensure they are all accounted for.
metrics-disk-capacity
Acquire disk capacity metrics from df and convert them to a form usable by graphite
metrics-disk
Read /proc/iostats for disk metrics and put them in a form usable by Graphite. See iostats.txt for more details.
metrics-disk-usage
Based on disk-capacity-metrics.rb by bhenerey and nstielau. The difference here being how the key is defined in graphite and the size we emit to graphite(now using megabytes), inode info has also been dropped.
check-smart-status
Check the SMART status of hardrives and alert based upon a given set of thresholds
check-smart
Check the health of a disk using smartctl
check-smart-tests
Check the status of SMART offline tests and optionally check if tests were executed in a specified interval
- bin/check-disk-usage.rb
- bin/check-fstab-mounts.rb
- bin/check-smart-status.rb
- bin/check-smart.rb
- bin/check-smart-tests.rb
- bin/metrics-disk.rb
- bin/metrics-disk-capacity.rb
- bin/metrics-disk-usage.rb
This is a sample input file used by check-smart-status and check-smart, see the script for further details.
{
"smart": {
"attributes": [
{ "id": 1, "name": "Raw_read_Error_Rate", "read": "left16bit" },
{ "id": 5, "name": "Reallocated_Sector_Ct" },
{ "id": 9, "name": "Power_On_Hours", "read": "right16bit", "warn_max": 10000, "crit_max": 15000 },
{ "id": 10 , "name": "Spin_Retry_Count" },
{ "id": 184, "name": "End-to-End_Error" },
{ "id": 187, "name": "Reported_Uncorrect" },
{ "id": 188, "name": "Command_Timeout" },
{ "id": 193, "name": "Load_Cycle_Count", "warn_max": 300000, "crit_max": 600000 },
{ "id": 194, "name": "Temperature_Celsius", "read": "right16bit", "crit_min": 20, "warn_min": 10, "warn_max": 40, "crit_max": 50 },
{ "id": 196, "name": "Reallocated_Event_Count" },
{ "id": 197, "name": "Current_Pending_Sector" },
{ "id": 198, "name": "Offline_Uncorrectable" },
{ "id": 199, "name": "UDMA_CRC_Error_Count" },
{ "id": 201, "name": "Unc_Soft_read_Err_Rate", "read": "left16bit" },
{ "id": 230, "name": "Life_Curve_Status", "crit_min": 100, "warn_min": 100, "warn_max": 100, "crit_max": 100 }
]
},
"hardware": {
"devices": [
{ "path": "sda", "ignore" : [ 187 ] },
{ "path": "sdb", "override": "/dev/twa0 -d 3ware,0" }
]
}
}If you are verifying certificates in the gem install you will need the certificate for the sys-filesystem gem loaded
in the gem certificate store. That cert can be found here.