433MHz radio libraries for Arduino This package contains four libraries for use with Arduino: - RemoteSensor: send and receive data of a weather station with remote sensors. - RemoteSwitch and NewRemoteSwitch: send and receive data of radio controlled power switches. - InterruptChain: chains Arduino interrupts; allows for receiving both sensor and switch controls at the same time. The libraries are well documented with helpful examples to get you started. Latest source and wiki: https://bitbucket.org/fuzzillogic/433mhzforarduino QUICKSTART: * Copy the directories InterruptChain, NewRemoteSwitch, RemoteSwitch and RemoteSensor to the "libraries" directory in your Arduino sketchbook directory. See http://arduino.cc/en/Guide/Libraries for detailed instructions. * Start the Arduino IDE. * From the File menu, select Examples -> InterruptChain -> ReceiveRemoteAndSensor. * Connect a 433MHz receiver to digital pin 2 on the Arduino. * Run the sketch. * Enabled the serial monitor at 115200 baud. * Press buttons on your remote(s), and/or wait for your thermo/hygro sensor to transmit. * You should see the received data in the serial monitor.