About

Anarchy is a simple and intuitive Terminal based (TUI) Arch Linux installer. It guides you through every aspect of the installation procedure, from partitioning to installing your favorite DE/WM.

Installation

Linux

The easiest way to flash Anarchy onto a USB drive is to use dd:

# Do NOT copy and paste the following, manually type the command, filling in
# the appropriate information
# Replace sdx with the name of your USB
dd if=anarchy-<version>-x86_64.iso of=/dev/sdx status=progress conv=fsync

If you’re more comfortable with GUI programs, you can use Etcher.

Windows

Use Win32DiskImager or Rufus.

Install via SSH

Note: Running the installer over an SSH connection requires physical access to the remote machine.

After flashing Anarchy on a USB drive, it must be booted from the machine where you want to install. If it has a wired internet connection, you only have to wait approximately one minute for Anarchy to start before connecting. If you have a wireless connection, you have two options: you normally connect to the target machine (requires physical access), or you must compile the installer yourself as indicated in the next step, but adding the file autoconnect.sh (it must be kept exactly the same name) along with the script build.sh. The autoconnect.sh file must have the following format:

SSID="your_wifi_network_ssid"
PASSWORD="your_wifi_network_password"
PUBLIC_KEY=/path/to/your/public/key

SSID must contain the name that identifies the wifi network, PASSWORD is its respective password, and PUBLIC_KEY refers to the local path of our public SSH key. Then compile the installer normally.

To connect simply run on your local machine (from where you will install via SSH):

ssh root@ip.address.of.target

The default password is anarchy.

Compiling the installer

Anarchy uses Archiso as a base. Before starting the installation you need to have the archiso package installed (pacman -S archiso).

To compile the installer run the build.sh script as root. To see all the available compilation options run ./build.sh -h.

Reporting issues

Before reporting an issue do the following:

Check if you’ve updated Anarchy (anarchy -u before starting the installation)
Share the logs in the issue report (Run cat /tmp/anarchy.log | nc termbin.com 9999 in the terminal and share the url you get returned - e.g. https://termbin.com/xxxx)
If it’s a post-installation issue check the Arch Wiki and Arch Forums, since it’s most likely an Arch-related issue, not Anarchy’s

If you don’t want to sign up for Gitlab, you can also report issues over email.

Contributing

We’re always looking for new contributors to the project, so check out our contributing guide for more info.

License

The project is licensed under the GNU GPLv2 license.

TheRingMaster/installer