TheZeroBeast/TZB-MMU2S-Firmware

Issues

• What next?

  #243 opened a year ago by timemaster5
  6

• Support for new FIRMWARE 3.12.2

  #242 opened 2 years ago by Naugrimohtar
  0

• Support BIGTREETECH MMU2 DIP

  #241 opened 2 years ago by lemmingDev
  1

• Can Load to nozzle but failed loading in printing

  #217 opened 3 years ago by sergiofagundes
  4

• No precompile MMU2 file for 4.0.2

  #238 opened 2 years ago by floridaservices
  4

• Cam unlocking

  #239 opened 2 years ago by pennystockss
  10

• Add a button to move the selector to position 6 during load / unload errors

  #240 opened 2 years ago by motsu35
  0

• There is the "normal" MMU2S firmware version missing for 4.0.2 only dual blades are availale. Please :)

  #237 opened 2 years ago by Ic33s
  5

• Request: Changes needed to disable steppers on MMU after timeout

  #236 opened 2 years ago by sabaatworld
  1

• MMU2 Filment Idler Banging/Grinding

  #212 opened 3 years ago by Darkknight33
  11

• Marlin 2.0.x support

  #224 opened 3 years ago by sean97140
  1

• Selector in bad position

  #235 opened 2 years ago by r4yzs
  3

• Readme.md file requires Update

  #233 opened 2 years ago by bryn51
  9

• FW 4.0.2 Fails after upload. Not recognised by Einsy FW

  #234 opened 2 years ago by bryn51
  3

• MMU does not do anything in mid-print

  #229 opened 3 years ago by eurohell
  5

• Readme.md needs rework

  #232 opened 2 years ago by bryn51
  1

• Selector suddenly moves while printing in mid-print

  #228 opened 3 years ago by eurohell
  1

• Questions: Compiling from source

  #231 opened 3 years ago by fromanza
  1

• Which Firmware Hex File to use for MMU2S with stock single blade?

  #230 opened 3 years ago by talldonkey
  3

• Force filament cut on each filament change

  #227 opened 3 years ago by gutschke
  2

• Toggle option for extruder movement on MMU error

  #226 opened 3 years ago by BaconFase
  2

• Handle mmu reset/power loss event.

  #225 opened 3 years ago by sean97140
  2

• Bear Exxa Extruder

  #197 opened 3 years ago by fila612
  10

• Selector loses position

  #219 opened 3 years ago by madxbgt
  4

• MMU2S does not continue print after unload failure

  #223 opened 3 years ago by itscountolaf
  6

• Automatically unload and retract filament before attempting to cut

  #220 opened 3 years ago by gutschke
  3

• Setting to switch between PINDA and BLTouch

  #222 opened 3 years ago by Anonymus484
  1

• Heatbreak Jam Retry Stops Working If Manual Intervention Required

  #199 opened 4 years ago by TheClark
  5

• Implement ArcWelder support PR

  #221 opened 3 years ago by WarrenSchultz
  3

• Multi Language build

  #198 opened 3 years ago by fila612
  3

• LCD Issue - can the firmware force a screen refresh or is there a GCODE that can do that?

  #200 opened 3 years ago by Naugrimohtar
  12

• Mmu2s and Display

  #215 opened 3 years ago by Ondak87
  1

• Question: Drop in replacement of Prusa MMU firmware?

  #203 opened 3 years ago by Redferne
  12

• Z Axis movement shortcut

  #216 opened 3 years ago by dameningen4914
  7

• Persistant tune temperature settings per filament

  #211 opened 3 years ago by BaconFase
  3

• Error: Static values overwritten on LCD when using Octoprint

  #213 opened 3 years ago by Darkknight33
  8

• PrusaLink Support

  #214 opened 3 years ago by timemaster5
  1

• Error on failure recovery

  #205 opened 3 years ago by fromanza
  9

• M420 fade height exists for prusa ?

  #208 opened 3 years ago by sergiofagundes
  2

• Firmware Addition.

  #210 opened 3 years ago by gizzburn
  2

• New Prusa Firmware version 3.10.0

  #204 opened 3 years ago by timemaster5
  6

• Bowden Length Calibration

  #207 opened 3 years ago by Ondak87
  2

• Check position mmu

  #209 opened 3 years ago by Sterbo88
  3

• MMU Doesn't retract filament after a filament eject

  #206 opened 3 years ago by Pun-e
  2

• MK2.5S Bear calibration fails

  #202 opened 4 years ago by ra100
  1

• Unable to Flash MMU2 Firmware

  #201 opened 4 years ago by alackofcolor
  3

• M112 with Octoprint on MMU Single Mode

  #194 opened 4 years ago by XRyu
  6

• Support for Skelestruder

  #196 opened 4 years ago by tmolberg
  3

• Min Temp

  #195 opened 4 years ago by gizzburn
  3

• Doesn’t retry on a clog/jam

  #193 opened 4 years ago by Naugrimohtar
  4