Pinned Repositories
BIGTREETECH-SKR-mini-E3
BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.
CR-6-touchscreen_Thinkersbluff_Fork
A cleaned-up version of the refactored DWIN_SET built with DGUS Tool 8.2.1.14. A final stable version has now been transferred to the upstream repository.
CR-6_Klipper
Thinkersbluff's fork of @K2Van's repository for Klipper firmware details for the Creality CR-6 printers.
CR6CommunityMarlin_BTTCR6
Jan2023 - I have decided to move to Klipper and stop using Marlin. I was using this repository branch to host my own tailored version of 6.1 until a stable release 6.2 or higher was available from upstream
DGUS-Reloaded_for_CR6-DWIN-SET_Component
Forks the Desuuuu DWIN T5UID1 touchscreen firmware, and refactors it for use on the CR6 T5L DWIN display . Must be used with the modified Klipper from https://github.com/Thinkersbluff/DGUS-Reloaded_for_CR6-Klipper_Component
DGUS-Reloaded_for_CR6-Klipper_Component
Forks the version of Klipper modified by Desuuuu, to integrate DWIN_SET with Klipper through the motherboard/display UART interface.. Use only with this DWIN_SET: https://github.com/Thinkersbluff/DGUS-Reloaded_for_CR6-DWIN-SET_Component
Klipper-dgus_CR6
A project to port klipper-dgus to the CR6 DWIN T5L 272x480 display and extend/modify that project for my personal use.
klipper-dgus_vyper
A python project to connect an AnyCubic Vyper DGUS display to Klipper
Personal-Klipper-files
Rather than try to manage my own configuration files separately from those of @K2Van within the one forked version of his repository, I use this repo to document and preserve my own version of the Klipper configuration files, for my CR6-SE and my Ender-3 printers. Please note that these files may contain errors, inefficiencies and poor programming practices. I make no warranty whatsoever that my files will be suitable for use by others.
python-dgus_vyper
A python library to control DGUS displays through the Moonraker API
Thinkersbluff's Repositories
Thinkersbluff/DGUS-Reloaded_for_CR6-DWIN-SET_Component
Forks the Desuuuu DWIN T5UID1 touchscreen firmware, and refactors it for use on the CR6 T5L DWIN display . Must be used with the modified Klipper from https://github.com/Thinkersbluff/DGUS-Reloaded_for_CR6-Klipper_Component
Thinkersbluff/DGUS-Reloaded_for_CR6-Klipper_Component
Forks the version of Klipper modified by Desuuuu, to integrate DWIN_SET with Klipper through the motherboard/display UART interface.. Use only with this DWIN_SET: https://github.com/Thinkersbluff/DGUS-Reloaded_for_CR6-DWIN-SET_Component
Thinkersbluff/Klipper-dgus_CR6
A project to port klipper-dgus to the CR6 DWIN T5L 272x480 display and extend/modify that project for my personal use.
Thinkersbluff/Personal-Klipper-files
Rather than try to manage my own configuration files separately from those of @K2Van within the one forked version of his repository, I use this repo to document and preserve my own version of the Klipper configuration files, for my CR6-SE and my Ender-3 printers. Please note that these files may contain errors, inefficiencies and poor programming practices. I make no warranty whatsoever that my files will be suitable for use by others.
Thinkersbluff/CR-6-touchscreen_Thinkersbluff_Fork
A cleaned-up version of the refactored DWIN_SET built with DGUS Tool 8.2.1.14. A final stable version has now been transferred to the upstream repository.
Thinkersbluff/CR-6_Klipper
Thinkersbluff's fork of @K2Van's repository for Klipper firmware details for the Creality CR-6 printers.
Thinkersbluff/BIGTREETECH-SKR-mini-E3
BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.
Thinkersbluff/CR6CommunityMarlin_BTTCR6
Jan2023 - I have decided to move to Klipper and stop using Marlin. I was using this repository branch to host my own tailored version of 6.1 until a stable release 6.2 or higher was available from upstream
Thinkersbluff/klipper-dgus_vyper
A python project to connect an AnyCubic Vyper DGUS display to Klipper
Thinkersbluff/python-dgus_vyper
A python library to control DGUS displays through the Moonraker API