Hub75 LED Panel driver + 10/100 Base T to MII transciever + 25W PoE supply.
Board is untested, estimated driver logic power consumption is ~250-500ma (hopefully less).
Remaining 4-ish amps should be enough to drive 64x64 panel at full brightness, however, with
a 1oz copper board, this will (in theory) induce a ~20C temp rise.
Basic Stats
Stat
Value
Voltage
5v
Amperage
~5A
Onboard current draw
TBD (Hopefully under 500ma)
Interface
10/100 base T transciever, 4 debug LED's, Hub75 header