Klipper MCU firmware build scripts
The firmware is tested only on KINGROON KP3S.
Run the following commands to build the firmware.
git clone https://github.com/Tiryoh/klipper-mcu-config.git
cd klipper-mcu-config
./build.sh
The firmware will be built and written in the build directory.
If you want to download the firmware to a PC from the web browser, run the following command to start the web server.
python3 -m http.server 8000
The file is available from http://$raspberry-pi-ip-address:8000, like http://192.168.10.40:8000.
After downloading the firmware file, write the Robin_nano.bin to the SD card and flash it to the KP3S.
Download this repository and run the following commands.
docker build -t klipper-firmware-builder:latest .
docker run --rm -it -v $PWD/build:/home/klippy/klipper-mcu-config/build klipper-firmware-builder:latest /home/klippy/klipper-mcu-config/build.sh
The firmware will be built and written in the build directory.
After creating the firmware file, write the Robin_nano.bin to the SD card and flash it to the KP3S.
This repository is released under the GNU General Public License v3.0,
because it includes the scripts released under the GNU General Public License v3.0.
Copyright (C) 2022 Daisuke Sato <tiryoh@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.