Purpose

Further the state of Microsoft 365 security by authoring a PowerShell script that automates the security assessment of Microsoft 365 environments.

Soteria Inspect

Soteria Inspect is born from the 365Inspect project and is Soteria's SaaS solution to aid in assessing the security of a Microsoft 365 tenant with over 200 points of inspection across the full suite of Microsoft 365 services.

Soteria Inspect for Microsoft 365 allows customers to track changes to each finding's affected objects over time as well as remediation efforts, and now includes multi-tenancy for MSP's and parent organizations to keep a finger on the pulse of their child tenants.

Soteria Inspect for Microsoft 365 is available directly through Soteria or through the Azure Marketplace

See the feature comparison!

Setup

365Inspect Community Edition requires the administrative PowerShell modules for Exchange administration, Microsoft Graph, Microsoft Teams, and the Sharepoint administration module.

365Inspect is now compatible with PowerShell Core (6+), and requires a Microsoft Windows operating system due to required module dependencies.

The 365Inspect.ps1 PowerShell script will validate the installed modules and minimum version of the modules necessary for the Inspectors to function.

If you do not have these modules installed, you will be prompted to install them, and with your approval, the script will attempt installation. Otherwise, you should be able to install them with the following commands in an administrative PowerShell prompt, or by following the instructions at the references below:

Install-Module -Name ExchangeOnlineManagement -AllowClobber -Force

# NOTE: If you are using PowerShell 5.1 you must set the MaximumVersion Parameter for PnP PowerShell 
Install-Module -Name PnP.PowerShell -AllowClobber -MaximumVersion 1.12.0 -Force

# NOTE: If you are using PowerShell 6.0 or higher you can install the current version of PnP PowerShell 
Install-Module -Name PnP.PowerShell -AllowClobber -Force

Install-Module -Name Microsoft.Graph -AllowClobber -Force

Install-Module -Name MicrosoftTeams -AllowClobber -Force

Install Exchange Online PowerShell

Install SharePoint PnP PowerShell Module

Install Microsoft Graph SDK

Install Microsoft Teams

Once the above are installed, download the 365Inspect source code folder from Github using your browser or by using git clone.

As you will run 365Inspect with administrative privileges, you should place it in a logical location and make sure the contents of the folder are readable and writable only by the administrative user. This is especially important if you intend to install 365Inspect in a location where it will be executed frequently or used as part of an automated process. NOTE: 365Inspect does not need to be run in an administrative PowerShell window to function.

Usage

To run 365Inspect, open a PowerShell console and navigate to the folder you downloaded 365Inspect into:

cd 365Inspect

You will interact with 365Inspect by executing the main script file, 365Inspect.ps1, from within the PowerShell command prompt.

All 365Inspect requires to inspect your O365 tenant is access via an O365 account with proper permissions, so most of the command line parameters relate to the organization being assessed and the method of authentication.

Execution of 365Inspect looks like this:

.\365Inspect.ps1 -OutPath <value> -UserPrincipalName myuser@mytenant.onmicrosoft.com -Auth <MFA|ALREADY_AUTHED|APP>

Execution Examples

Script Execution

For example, to log in by entering your credentials in a browser with MFA support:

    .\365Inspect.ps1 -OutPath ..\365_report -UserPrincipalName myuser@mytenant.onmicrosoft.com -Auth MFA

To login to a Government or other National Cloud Deployment (China, Germany, etc.) the -Environment parameter should be specified as follows:

    .\365Inspect.ps1 -OutPath ..\365_report -UserPrincipalName myuser@mytenant.onmicrosoft.com -Auth MFA -Environment USGovGCCHigh

Valid arguments for the -Environment are:

Default - Default Microsoft 365 tenant authorization endpoints. This is the default argument if the Environment parameter is not specified.
USGovGCCHigh - US Government GCC High tenants
USGovDoD - US Government DoD tenants
Germany - Microsoft 365 Azure Germany hosted tenants
China - Microsoft 365 China/Vianet hosted tenants

Application Authentication can be achieved by executing the script with the following parameters:

    .\365Inspect.ps1 -OutPath ..\365_report -UserPrincipalName myuser@mytenant.onmicrosoft.com -Auth APP

To login to a Government or other National Cloud Deployment (China, Germany, etc.) the -Environment parameter should be specified as follows:

    .\365Inspect.ps1 -OutPath ..\365_report -UserPrincipalName myuser@mytenant.onmicrosoft.com -Auth APP -Environment USGovGCCHigh

Valid arguments for the -Environment are:

Default - Default Microsoft 365 tenant authorization endpoints. This is the default argument if the Environment parameter is not specified.
USGovGCCHigh - US Government GCC High tenants
USGovDoD - US Government DoD tenants
Germany - Microsoft 365 Azure Germany hosted tenants
China - Microsoft 365 China/Vianet hosted tenants

NOTE: There are prerequisites for execution of 365Inspect with application authentication. Go to Application Authentication Requirements

365Inspect now supports report output to HTML (default value), CSV, and XML formats.

For example, CSV reports can be generated by calling the -ReportType parameter:

    .\365Inspect.ps1 -OutPath ..\365_report -UserPrincipalName myuser@mytenant.onmicrosoft.com -Auth MFA -ReportType CSV

365Inspect can be run with only specified Inspector modules, or conversely, by excluding specified modules.

For example, to log in by entering your credentials in a browser with MFA support:

    .\365Inspect.ps1 -OutPath ..\365_report -UserPrincipalName myuser@mytenant.onmicrosoft.com -Auth MFA -SelectedInspectors inspector1, inspector2

    .\365Inspect.ps1 -OutPath ..\365_report -Auth MFA -ExcludedInspectors inspector1, inspector2, inspector3

To break down the parameters further:

OutPath is the path to a folder where the report generated by 365Inspect will be placed.
- Required? Yes
Auth is a selector that should be one of the literal values "MFA" or "ALREADY_AUTHED".
- Auth controls how 365Inspect will authenticate to all of the Office 365 services.
Options
- Auth MFA will produce a graphical popup in which you can type your credentials and even enter an MFA code for MFA-enabled accounts.
- Auth ALREADY_AUTHED instructs 365Inspect not to authenticate before scanning. This may be preferable if you are executing 365Inspect from a PowerShell prompt where you already have valid sessions for all of the described services, such as one where you have already executed 365Inspect.
- Auth APP instructs 365Inspect to prompt for Microsoft Entra ID Application Service Principal information. Required parameter variables are:
  - AppId - The application ID of the registered application
  - Certificate Thumbprint - Thumbprint of the created self-signed certificate
  - Domain - The mail domain (user@company.com or company.com) or tenant domain (company.onmicrosoft.com) of the tenant to be scanned.
* Required? Yes
SelectedInspectors is the name or names of the inspector or inspectors you wish to run with 365Inspect. If multiple inspectors are selected they must be comma separated. Only the named inspectors will be run.
- Required? No
ExcludedInspectors is the name or names of the inspector or inspectors you wish to prevent from running with 365Inspect. If multiple inspectors are selected they must be comma separated. All modules other included modules will be run.
- Required? No
UserPrincipalName - UserPrincipalName of the assessor, this is included to reduce the number of times you need to enter credentials in supported modules.
- Required? Yes
ReportType - Output format of the generated report. Current supported vales are HTML (default), CSV, and XML.
- Required? No
Environment - Specify the Azure Cloud instance to connect to for non-standard/consumer Microsoft 365 tenants.
- Required? No

When you execute 365Inspect with -Auth MFA, it may produce several graphical login prompts that you must sequentially log into. This is normal behavior as Exchange, SharePoint etc. have separate administration modules and each requires a different login session. If you simply log in the requested number of times, 365Inspect should begin to execute. This is the opposite of fun and we're seeking a workaround, but needless to say we feel the results are worth the minute spent looking at MFA codes.

As 365Inspect executes, it will steadily print status updates indicating which inspection task is running.

365Inspect may take some time to execute. This time scales with the size and complexity of the environment under test. For example, some inspection tasks involve scanning the account configuration of all users. This may occur near-instantly for an organization with 50 users, or could take entire minutes (!) for an organization with 10000.

Output

365Inspect creates the directory specified in the out_path parameter. This directory is the result of the entire 365Inspect inspection. It contains four items of note:

Report.html: graphical report that describes the O365 security issues identified by 365Inspect, lists O365 objects that are misconfigured, and provides remediation advice.
Various text files named [Inspector-Name]: these are raw output from inspector modules and contain a list (one item per line) of misconfigured O365 objects that contain the described security flaw. For example, if a module Inspect-FictionalMFASettings were to detect all users who do not have MFA set up, the file "Inspect-FictionalMFASettings" in the report ZIP would contain one user per line who does not have MFA set up. This information is only dumped to a file in cases where more than 15 affected objects are discovered. If less than 15 affected objects are discovered, the objects are listed directly in the main HTML report body.
Report.zip: zipped version of this entire directory, for convenient distribution of the results in cases where some inspector modules generated a large amount of findings.
Log directory: 365Inspect logs any errors encountered during the scripts execution to a timestamped log file found in the Log directory

CSV Output

Due to the nature of some of the returned items, the csv report is delimited on the carat (^) character. It is recommended to open the CSV report in a text editor rather than Excel, as Excel defaults to a comma (,) delimiter and will render the report incorrectly. Once opened in a text editor, the data may be pasted into Excel.

Coming Soon!

You tell us!

Change Log

Support for National Cloud Deployments

Older Changes

365Inspect now supports Application Authentication
365Inspect's HTML report format has changed
- Include new visual indicators of risk in the form of two charts
- Separated the PowerShell commands from the remediation steps and added syntax highlighting
- Moved the list of Inspectors executed to an appendix at the bottom of the report

Necessary Privileges

365Inspect can't run properly unless the O365 account you authenticate with has appropriate privileges. 365Inspect requires, at minimum, the following:

Global Administrator
SharePoint Administrator

We realize that these are extremely permissive roles, unfortunately due to the use of Microsoft Graph, we are restricted from using lesser privileges by Microsoft. Application and Cloud Application Administrator roles (used to grant delegated and application permissions) are restricted from granting permissions for Microsoft Graph or Azure AD PowerShell modules. Microsoft Docs - Application Administrator

If executing 365Inspect using the application auth parameter, additional roles must be granted to allow the application to perform all executed tasks. See Application Authentication requirements

Application Authentication Requirements

Before 365Inspect can be utilized all other requisite components must be in place.

Prerequisite Preparation

For the most efficient use of time, it is recommended to perform the requisite functions in the following order:

Prepare the client machine
1. Client machine MUST be a Microsoft Windows OS
2. Install required PowerShell modules listed in the Setup section above.
3. Ensure proper access controls are in place
Create the necessary certificate
1. Create self-signed certificate for Azure Application authentication
Create Azure Application
1. Create the Service Principal
2. Assign necessary rights to the application API permissions
3. Assign the required roles to the application's Service Principal
  1. Global Administrator
  2. Exchange Administrator
  3. Teams Administrator
  4. SharePoint Administrator
4. Upload certificate
5. Document required information
Acquire 365Inspect tool
1. Download and extract the tool to the desired location on the client

See the following references:

Required Permissions

Expand

Required Permissions

User.Read.All
Calendars.Read
Mail.Read
Contacts.Read
TeamMember.Read.All
Place.Read.All
Chat.UpdatePolicyViolation.All
Policy.Read.ConditionalAccess
AppCatalog.Read.All
TeamsAppInstallation.ReadForUser.All
eDiscovery.Read.All
UserShiftPreferences.Read.All
CustomSecAttributeDefinition.Read.All
AgreementAcceptance.Read.All
ExternalConnection.Read.All
EduRoster.Read.All
ServicePrincipalEndpoint.Read.All
CloudPC.Read.All
DeviceManagementManagedDevices.Read.All
OnlineMeetings.Read.All
Device.Read.All
TeamsTab.Read.All
DelegatedAdminRelationship.Read.All
UserAuthenticationMethod.Read.All
TeamsActivity.Read.All
Printer.Read.All
OrgContact.Read.All
TeamsAppInstallation.ReadForChat.All
Policy.Read.PermissionGrant
OnlineMeetingArtifact.Read.All
SharePointTenantSettings.Read.All
ChannelSettings.Read.All
SecurityEvents.Read.All
DelegatedPermissionGrant.ReadWrite.All
OnlineMeetingRecording.Read.All
IdentityRiskyServicePrincipal.Read.All
CrossTenantUserProfileSharing.Read.All
Calendars.Read
Mail.ReadBasic.All
PrivilegedAccess.Read.AzureAD
RoleManagement.Read.Directory
Channel.ReadBasic.All
People.Read.All
SecurityAlert.Read.All
Group.Read.All
AdministrativeUnit.Read.All
MailboxSettings.Read
CrossTenantInformation.ReadBasic.All
EduAdministration.Read.All
Sites.Read.All
PrintJob.Read.All
DeviceManagementServiceConfig.Read.All
ServiceMessage.Read.All
PrintSettings.Read.All
DirectoryRecommendations.Read.All
Notes.Read.All
EntitlementManagement.Read.All
CallRecords.Read.All
IdentityUserFlow.Read.All
ChatMessage.Read.All
Directory.Read.All
ConsentRequest.Read.All
RoleManagement.Read.All
CallRecord*PstnCalls.Read.All
PrivilegedAccess.Read.AzureResources
User.Read.All
Domain.Read.All
EduAssignments.ReadBasic.All
EduRoster.ReadBasic.All
Agreement.Read.All
OnlineMeetingTranscript.Read.All
ChannelMember.Read.All
Schedule.Read.All
SecurityIncident.Read.All
GroupMember.Read.All
DeviceManagementRBAC.Read.All
RoleManagement.Read.CloudPC
Files.Read.All
CustomSecAttributeAssignment.Read.All
SearchConfiguration.Read.All
DeviceManagementConfiguration.Read.All
Team.ReadBasic.All
APIConnectors.Read.All
Mail.Read
Chat.Read.All
ExternalItem.Read.All
ChannelMessage.Read.All
EduAssignments.Read.All
SecurityActions.Read.All
ThreatAssessment.Read.All
IdentityProvider.Read.All
TeamSettings.Read.All
IdentityRiskyUser.Read.All
AccessReview.Read.All
LicenseAssignment.ReadWrite.All
TermStore.Read.All
TeamworkTag.Read.All
PrivilegedAccess.Read.AzureADGroup
InformationProtectionPolicy.Read.All
Organization.Read.All
Contacts.Read
IdentityRiskEvent.Read.All
Mail.ReadBasic
AuditLog.Read.All
Policy.Read.All
Policy.ReadWrite.CrossTenantAccess
Member.Read.Hidden
Chat.ReadBasic.All
Application.Read.All
ProgramControl.Read.All
ServiceHealth.Read.All
ChatMember.Read.All
DeviceManagementApps.Read.All
ThreatIndicators.Read.All
TeamsAppInstallation.ReadForTeam.All
ShortNotes.Read.All
Reports.Read.All
PrintJob.ReadBasic.All
TrustFrameworkKeySet.Read.All
ThreatHunting.Read.All
TeamworkDevice.Read.All
Synchronization.Read.All
AuthenticationContext.Read.All
CustomAuthenticationExtension.Read.All
ThreatSubmission.Read.All
LifecycleWorkflows.Read.All
ReportSettings.Read.All
RecordsManagement.Read.All
RoleManagementAlert.Read.Directory

Developing Inspector Modules

365Inspect is designed to be easy to expand, with the hope that it enables individuals and organizations to either utilize their own 365Inspect modules internally, or publish those modules for the O365 community.

All of 365Inspect's inspector modules are stored in the .\inspectors folder.

It is simple to create an inspector module. Inspectors have two files:

ModuleName.ps1: the PowerShell source code of the inspector module. Should return a list of all O365 objects affected by a specific issue, represented as strings.
ModuleName.json: metadata about the inspector itself. For example, the finding name, description, remediation information, and references.

Templates are included in the Templates folder. Simply add your code and values in the respective locations. The PowerShell and JSON file names must be identical for 365Inspect to recognize that the two belong together. There are numerous examples in 365Inspect's built-in suite of modules, but we'll put an example here too.

Example .ps1 file, BypassingSafeAttachments.ps1:

# Define a function that we will later invoke.
# 365Inspect's built-in modules all follow this pattern.
function Inspect-BypassingSafeAttachments {
	# Query some element of the O365 environment to inspect. Note that we did not have to authenticate to Exchange
	# to fetch these transport rules within this module; assume main 365Inspect harness has logged us in already.
	$safe_attachment_bypass_rules = (Get-TransportRule | Where { $_.SetHeaderName -eq "X-MS-Exchange-Organization-SkipSafeAttachmentProcessing" }).Identity
	
	# If some of the parsed O365 objects were found to have the security flaw this module is inspecting for,
	# return a list of strings representing those objects. This is what will end up as the "Affected Objects"
	# field in the report.
	If ($safe_attachment_bypass_rules.Count -ne 0) {
		return $safe_attachment_bypass_rules
	}
	
	# If none of the parsed O365 objects were found to have the security flaw this module is inspecting for,
	# returning $null indicates to 365Inspect that there were no findings for this module.
	return $null
}

# Return the results of invoking the inspector function.
return Inspect-BypassingSafeAttachments

Example .json file, BypassingSafeAttachments.json:

{
    "FindingName": "Do Not Bypass the Safe Attachments Filter",
    "Description": "In Exchange, it is possible to create mail transport rules that bypass the Safe Attachments detection capability. The rules listed above bypass the Safe Attachments capability. Consider reviewing these rules, as bypassing the Safe Attachments capability even for a subset of senders could be considered insecure depending on the context or may be an indicator of compromise.",
    "Remediation": "Navigate to the Mail Flow &rarr; Rules screen in the Exchange Admin Center. Look for the offending rules and begin the process of assessing who created them and whether they are necessary to the continued function of the organization. If they are not, remove the rules.",
    "DefaultValue": "None",
    "ExpectedValue": "None",
    "Impact": "Critical",
    "AffectedObjects": "",
    "Service": "Exchange",  // Valid values are Exchange, SharePoint, Teams, Intune, AzureAD, SecurityandCompliance, Tenant //
    "PowerShell": "", // Any PowerShell remediation command examples should be placed here //
    "References": [
        {
            "Url": "https://docs.microsoft.com/en-us/exchange/security-and-compliance/mail-flow-rules/manage-mail-flow-rules",
            "Text": "Manage Mail Flow Rules in Exchange Online"
        },
        {
            "Url": "https://www.undocumented-features.com/2018/05/10/atp-safe-attachments-safe-links-and-anti-phishing-policies-or-all-the-policies-you-can-shake-a-stick-at/#Bypass_Safe_Attachments_Processing",
            "Text": "Undocumented Features: Safe Attachments, Safe Links, and Anti-Phishing Policies"
        }
    ]
}

Once you drop these two files in the .\inspectors folder, they are considered part of 365Inspect's module inventory and will run the next time you execute 365Inspect.

You have just created the BypassingSafeAttachments Inspector module. That's all!

365Inspect will throw a pretty loud and ugly error if something in your module doesn't work or doesn't follow 365Inspect conventions, so monitor the command line output.

Contributing

We encourage community involvement and contributions! Please check out our Contributing Guidelines

About Security

365Inspect is a script harness that runs other inspector script modules stored in the .\inspectors folder. As with any other script you may run with elevated privileges, you should observe certain security hygiene practices:

No untrusted user should have write access to the 365Inspect folder/files, as that user could then overwrite scripts or templates therein and induce you to run malicious code.
No script module should be placed in .\inspectors unless you trust the source of that script module.

About Soteria

Soteria offers a wide range of security and advisory solutions including Incident Response, Managed Detection and Response, Security Assessments, Penetration Testing, and more. Contact us for all your needs!

Tobey123/365Inspect

Purpose

Soteria Inspect

Setup

Usage

Script Execution

Output

CSV Output

Coming Soon!

Change Log

Older Changes

Necessary Privileges

Application Authentication Requirements

Required Permissions

Required Permissions

Developing Inspector Modules

Contributing

About Security

About Soteria