Tom-Hirschberger/MMM-GPIO-Notifications

Issues

• No GPIO device gpiochip4

  #35 opened 2 months ago by Aergernis
  8

• Feature Request: Implement general delay for rotary l

  #33 opened 2 months ago by Tom-Hirschberger
  1

• gpioinfo empty

  #30 opened 7 months ago by mholzma
  8

• GPIO out and Pi5 support

  #20 opened 7 months ago by Aergernis
  22

• Readme: Update Readme to show how to install build tools before running preinstall in container

  #24 opened 7 months ago by Tom-Hirschberger
  0

• GPIO state after stop - module-restart demands motion in front of the sensor ?

  #25 opened 7 months ago by Matzeonom
  9

• Since 0.2.2 no more monitor activation

  #28 opened 7 months ago by det-box
  12

• Getting an errno: -22, 0|mm | syscall: 'write', 0|mm | code: 'EINVAL' error at MM start up and not detecting input

  #21 opened 8 months ago by bayfacalendar
  15

• Issues switching HDMI off on a PI3b

  #18 opened 8 months ago by Matzeonom
  2

• Install fails, Server only, remote GPIO

  #19 opened 8 months ago by Aergernis
  1

• [Feature Request] Rotary Encoder Support

  #14 opened a year ago by spxhub
  8

• Is python required

  #15 opened a year ago by mholzma
  4

• Enhancement: Support different delays depending of the state of the pin

  #12 opened 2 years ago by Tom-Hirschberger
  2

• Different notifications on different pin states of the same pin

  #10 opened 2 years ago by MTJoker
  3

• 0.7 stuck at postinstall

  #9 opened 2 years ago by gonzonia
  19

• Keep screen on until no more motion is detected.

  #6 opened 2 years ago by Clintvd
  5

• Monitorempfehlung

  #5 opened 2 years ago by Fischje
  1

• Repository nicht erreichbar

  #2 opened 4 years ago by yakko2001
  0

• How can I send notifications like this one ('CURRENT_PROFILE', 'Tom')

  #1 opened 5 years ago by tommasopeduzzi
  0