TomWhitwell/TuringMachine

Issues

• Sequence either gets filled completely (anticlockwise) or dies out (clockwise)

  #211 opened 6 months ago by mrmitchley
  5

• Main knob doesn't track properly

  #210 opened 7 months ago by bobearland
  0

• Calibration Help - Only Hearing Clock Pulses

  #209 opened 10 months ago by glassofJAMESon
  2

• Unable to calibrate. Steady tone until 12 o clock

  #203 opened 10 months ago by kengc
  5

• Does not run cycles or write anymore

  #208 opened a year ago by PulsarDevLabs
  0

• Calibration and sequencing issues

  #207 opened a year ago by OzzyMantis
  0

• Rightmost 3 LEDs glitchy

  #206 opened a year ago by mohoyt
  0

• CV Out remains constant

  #205 opened a year ago by jjberry
  1

• No CV output / No Output at DAC0800

  #204 opened a year ago by 5chn3
  0

• Problem calibrating, please help

  #190 opened 2 years ago by vonmartins
  1

• Not truely "random"

  #202 opened a year ago by rafael-azevedo
  12

• Very Narrow Sweet point

  #200 opened 2 years ago by drcat67
  10

• TM2 locks with all lights steady and bright after a minute or so

  #201 opened 2 years ago by alphonsom
  10

• 2 Turing machine mk2 both just built malfunctioning in the exact same way

  #199 opened 2 years ago by pteagan
  4

• Pulse Not Working

  #198 opened 2 years ago by drcat67
  10

• Calibration failure, tone interrupts, no sustained tone

  #185 opened 2 years ago by Ronny-08
  5

• has any one else gotten a random ticking no tone during calibration ?

  #182 opened 2 years ago by ddale69
  5

• All lights on at power-up, output inverted?

  #197 opened 2 years ago by mightysmooth
  7

• Calibration difficulties - overly sensitive trimmer?

  #196 opened 2 years ago by someot
  1

• No Noise nor randomness

  #195 opened 2 years ago by MFallise
  3

• Turing machine plays same high pitched notes

  #186 opened 2 years ago by Thirteenmoons
  6

• Issue First Start Turing Machine

  #193 opened 2 years ago by ulimakalu
  5

• One pulse plays twice with varying strength on second "ghost" pulse.

  #194 opened 2 years ago by electricdawn
  6

• CV input expected/safe voltage range?

  #192 opened 2 years ago by blastpastmusic
  2

• Pulse don’t work

  #191 opened 2 years ago by LegendaryTeacherLiu
  2

• Turing Machine

  #189 opened 2 years ago by Kolibrix2
  15

• Loops and almost locks, but bits constantly getting dropped

  #183 opened 2 years ago by doctea
  8

• Problem to Buy the Party from the TuringMachine BOM List

  #188 opened 2 years ago by Kolibrix2
  1

• Any advice for sourcing DAC0800LCN

  #187 opened 2 years ago by phpguru
  4

• 4016 question

  #184 opened 2 years ago
  1

• Length 6 doesn't lock properly

  #181 opened 2 years ago by Brokenbar
  2

• Calibration Issue: Trim pot doesn't lock until fully CCW no variable random output

  #168 opened 3 years ago by Guanavia
  7

• When I calibrate the main knob doesn't do anything

  #180 opened 2 years ago by vonmartins
  0

• Music Thing - Backpack rev3 pcb

  #179 opened 2 years ago by chashel
  0

• Main output produces negative voltages

  #178 opened 2 years ago by soundsbrown
  3

• Soldering length switch

  #177 opened 2 years ago by chriseccles73
  2

• Shift register issues on TM mkII

  #176 opened 2 years ago by friggeri
  2

• Turing machine MK2 half working

  #175 opened 3 years ago by MattCufre
  2

• Trimming issue

  #171 opened 3 years ago by davb2022
  1

• Turing machine - Cutting out and trimpot calibration issues

  #174 opened 3 years ago by tspear
  2

• No locking when trying to calibrate module

  #173 opened 3 years ago by fxwiegand
  0

• Turing Machine MK2, no signal from output

  #172 opened 3 years ago by Kazanthul
  2

• Unusual effect on powering up

  #170 opened 3 years ago by davb2022
  4

• Missing lines and trimming hole on uploaded gerber files

  #169 opened 3 years ago by fxwiegand
  0

• Workaround for lack of clock reset functionality?

  #166 opened 3 years ago by othmar52
  4

• Turing Machine problem/strange behaviour

  #167 opened 3 years ago by Heptalion
  3

• Turing Machine Mk2 no pitch CV out, single voltage level

  #165 opened 3 years ago by tim-gregory-pt
  5

• TM occasionally doesn't output any bits

  #164 opened 3 years ago by TempleMind
  2

• voltage jumps from least significant bits very small

  #163 opened 3 years ago by jsoishi
  1

• receiving clock but LEDs are remaining ON perminently and the output is not changing

  #162 opened 3 years ago by ashreid23
  8