/u-boot-mt76x8

u-boot for mt76x8,the default console is 57600,8,n,1,UART0

Primary LanguageCOtherNOASSERTION

u-boot-mt76x8 for mt76x8 V1.0.0

Download

# git clone https://github.com/Ying-Yun/u-boot-mt76x8.git

How to use

  • 1.make menuconfig ARCH=mips
  • 2.select MT7628 board
  • 3.select DRAM Tyep -> DDR2
  • 4.select DDR Component
  • 5.make clean;make ARCH=mips CROSS_COMPILE=mipsel-linux-

Note

  • Press 'WPS(gpio38)' button when power on, then enter the failsafe web mode.
  • change bps to 57600,fix gpio39,40,41,42 low when startup
  • web failsafe IP is 192.168.1.1
  • DDR2 can be 64MB or 128MB,just select 512Mbit or 1024Mbit in menuconfig

wiki:

* wiki.yystart.com