ToyKeeper/anduril

Issues

• Bug: Can't access strobe mode on dual-channel Emisar D4V2

  #94 opened 5 months ago by fwiffo
  2

• Bug: Jump-start flashes channels that should remain off on dual-channel lights under some circumstances (example fix attached)

  #96 opened 5 months ago by fwiffo
  0

• Request: Lower moonlight levels on dual-channel lights (example implementations attached)

  #95 opened 5 months ago by fwiffo
  0

• Question: Can someone explain Aux brightness levels?

  #44 opened a year ago by fiveseven808
  4

• Bug: Voltage readout doesn't display correctly <1V (AA lights)

  #93 opened 5 months ago by jan-Sanku
  2

• Bug: Voltage readout sometimes mixes digits

  #91 opened 5 months ago by jan-Sanku
  2

• Question: For Lightning, is 1H to "Interrupt current flash or start new one" a feature or not?

  #87 opened 5 months ago by dirtydancing
  4

• Request: Remove strobes/lightning from "Extended Simple" UI

  #85 opened 5 months ago by lukestein
  1

• Request: Add support for 3V batteries

  #88 opened 5 months ago by travisce
  2

• Request: New Model Number for Single Channel D4SV2 with RGB Switch & FFL351A Emitter/Driver

  #84 opened 6 months ago by Gymbow2007
  3

• Flash in lockout mode with '1h' or '2h' and a low light setting

  #83 opened 6 months ago by void-spark
  12

• Bug: Sometimes can’t dim from top of ramp (D3AA)

  #81 opened 7 months ago by lukestein
  5

• Allow turning off 'use post off voltage' from device configuration

  #82 opened 6 months ago by void-spark
  0

• D3AA has a bug when manually exiting version check.

  #77 opened 7 months ago by maru801
  2

• Request: Make tactical mode slots stay on after holding the button for X amounts of seconds.

  #79 opened 7 months ago by maru801
  2

• Question: Button LED brightness when ramping

  #78 opened 7 months ago by Mugrunty
  1

• Request: Don't use Smooth Steps for Momentary Moon/Momentary Low (from lockout mode)

  #75 opened 8 months ago by lukestein
  2

• Request: Make Voltage readout decimal place user configurable

  #74 opened 8 months ago by Mahir291
  1

• Request: adding thermal regulation to blinking modes

  #58 opened 9 months ago by Carpe-Diem-Postero
  19

• Replace lockout mode with tactical?

  #72 opened 8 months ago by Relys
  1

• Discussion: Channel mode and manual memory

  #71 opened 8 months ago by SiteRelEnby
  1

• Bug: 2 channel memory switching channels

  #69 opened 9 months ago by crox
  2

• newest FW for Noctigon KR4 with boost driver not working

  #30 opened a year ago by q-l-r
  4

• Police Strobe no output when main channel has lowest output saved

  #62 opened 9 months ago by duncanyoyo1
  4

• When using aux LEDs as channels, the lowest mode turns the LEDs off

  #65 opened 9 months ago by aslotnick
  2

• Bug: wrong channel_mode during animations

  #64 opened 9 months ago by readableness
  0

• Request: Add construction sequence to strobe mode options

  #60 opened 9 months ago by crox
  0

• Question on Sofirn SP36 hex

  #56 opened 9 months ago by tonurics
  1

• Anduril 2 today's release 2024-04-01 not working

  #55 opened 9 months ago by dirtydancing
  2

• Tactical Mode 3C cycles through the channels but gets stuck in Channel 1

  #40 opened 10 months ago by zaziboo
  10

• Translations of README and manual.

  #53 opened 10 months ago by dognodding
  0

• Possibility of changing timers from "hold to add time", to "click to add time"?

  #48 opened a year ago by maru801
  6

• Sofirn sc21 pro show wrong firmware?

  #41 opened a year ago by DeddyIta
  3

• Add selectable AUX to indicate current channel on multichannel lights

  #39 opened a year ago by dirtymoustache
  2

• enh: generate config summaries at compile time

  #42 opened a year ago by fiveseven808
  9

• 150/150 brightness PWM question

  #45 opened a year ago by fiveseven808
  2

• thefreeman-avr32dd20-devkit has dubious model id

  #34 opened a year ago by gretel
  2

• RGB aux voltage overrides RGB aux channel in ramp mode (Wurkkos TS11)

  #29 opened a year ago by diRk262
  6

• No ceiling to be found at all in smooth ramp style

  #35 opened a year ago by fredrik1102
  4

• Add option to skip DFP check

  #32 opened a year ago by SammysHP
  4

• RGB aux lights briefly flash red when switching to lockout mode on the 2023-12-03 release.

  #26 opened a year ago by maru801
  18

• 'version-string.sh' relies on git checkout having tags in any case

  #28 opened a year ago by gretel
  0

• Reverse polarity warning / undefined behavior

  #27 opened a year ago by singingtelegram
  2

• FW3X low mode and voltage delay 2023-12-03

  #25 opened a year ago by Light-Veteran
  3

• Collection of ideas and improvements for aux handling

  #20 opened a year ago by SammysHP
  3

• Add configurable aux LED channel

  #19 opened a year ago by SammysHP
  1

• ./make anduril - No such file or directory

  #13 opened a year ago by GarikFirst
  10