TrackerSB/WoodPacker

Issues

• Introduce default buttons

  #43 opened 2 years ago by TrackerSB
  0

• Optimize result by reordering planks

  #91 opened 2 years ago by TrackerSB
  0

• Collapsable lists

  #74 opened 2 years ago by TrackerSB
  0

• Introduce cutting plan name

  #73 opened 2 years ago by TrackerSB
  0

• Application freezes on addition of required plank

  #87 opened 2 years ago by TrackerSB
  0

• Components of invalid form highlighted

  #44 opened 2 years ago by TrackerSB
  1

• Add button disabled even if valid

  #70 opened 2 years ago by TrackerSB
  1

• Delete all button shows not message

  #83 opened 2 years ago by TrackerSB
  0

• Name required first for validity

  #79 opened 2 years ago by TrackerSB
  0

• Error messages do not support multiple lines

  #76 opened 2 years ago by TrackerSB
  0

• Auto mode of grain direction indicator instable

  #61 opened 2 years ago by TrackerSB
  0

• Edition doesn't set grain direction

  #71 opened 2 years ago by TrackerSB
  0

• Auto mode not disabled

  #80 opened 2 years ago by TrackerSB
  0

• Do not open PDF if printing failed

  #75 opened 2 years ago by TrackerSB
  0

• Introduce user friendly installer

  #77 opened 2 years ago by TrackerSB
  0

• PlankField highlighted invalid if empty

  #63 opened 2 years ago by TrackerSB
  0

• Stay on page after changes to plank problem

  #72 opened 2 years ago by TrackerSB
  0

• Edge bands in canvas hard to see

  #69 opened 2 years ago by TrackerSB
  0

• Edge band button state unclear

  #68 opened 2 years ago by TrackerSB
  0

• cutting breadth not applied between rows

  #54 opened 2 years ago by TrackerSB
  0

• Extend information on exported cutting plan

  #25 opened 2 years ago by TrackerSB
  1

• "Edit" does not set grain direction of plank

  #57 opened 2 years ago by TrackerSB
  0

• Insert values of plank to form if double clicked

  #51 opened 2 years ago by TrackerSB
  0

• Add counter for required planks

  #46 opened 2 years ago by TrackerSB
  1

• Introduce edge bands

  #47 opened 3 years ago by TrackerSB
  0

• Introduce edge bands

  #56 opened 3 years ago by TrackerSB
  1

• Make automatic grain direction for square plank indeterminate

  #48 opened 3 years ago by TrackerSB
  0

• Update on type

  #53 opened 3 years ago by TrackerSB
  0

• Visualize cut order

  #52 opened 3 years ago by TrackerSB
  0

• Replace JetBrains annotations with Lombok

  #50 opened 3 years ago by TrackerSB
  0

• Show path of currently opened demand list

  #38 opened 4 years ago by TrackerSB
  0

• Allow adding wood types

  #45 opened 3 years ago by TrackerSB
  0

• Allow specifying cutting width

  #27 opened 3 years ago by TrackerSB
  0

• Introduce short cuts

  #42 opened 4 years ago by TrackerSB
  0

• Undo actions

  #41 opened 4 years ago by TrackerSB
  0

• Allow specifying an oversize for the base plank

  #26 opened 4 years ago by TrackerSB
  0

• Add rulers to preview

  #40 opened 4 years ago by TrackerSB
  0

• Check whether current serialization and deserialization correspond

  #39 opened 4 years ago by TrackerSB
  0

• Increase reliability of serialization with XML

  #30 opened 4 years ago by TrackerSB
  1

• Ask for saving unsaved plank demand lists

  #35 opened 4 years ago by TrackerSB
  1

• Show overlay while taking snapshots for PDF export

  #37 opened 4 years ago by TrackerSB
  0

• Export only content of pagination, not the complete pagination component

  #36 opened 4 years ago by TrackerSB
  1

• Introduce delete all confirmation

  #33 opened 4 years ago by TrackerSB
  0

• Allow setting grain direction to automatic

  #31 opened 4 years ago by TrackerSB
  0

• Filtering unselects plank

  #34 opened 4 years ago by TrackerSB
  0

• Allow adding counts to required planks

  #32 opened 4 years ago by TrackerSB
  0

• Exported cutting plan exceeds PDF

  #28 opened 4 years ago by TrackerSB
  0

• Screens are transparent

  #29 opened 4 years ago by TrackerSB
  0

• Convert exported cutting plan to monochrome

  #24 opened 4 years ago by TrackerSB
  1

• Make file chooser remember last selected directory

  #23 opened 4 years ago by TrackerSB
  0