Hacker Zelda: Ocarina of Time (HackerOoT)

This project, based on the Zelda: Ocarina of Time decompilation project, aims to be an easy-to-use base to make Zelda: Ocarina of Time mods. It is not producing a PC port.

The only build currently supported is Master Quest (Debug), other versions will eventually be supported.

It builds the following ROM:

zelda_ocarina_mq_dbg.z64

Note: This repository does not include any of the assets necessary to build the ROM. A prior copy of the game is required to extract the needed assets.

HackerN64

Discord: https://discord.gg/brETAakcXr

Zelda Decompilation

Website: https://zelda64.dev

Discord: https://discord.zelda64.dev

Installation

Note: instructions for setting up Visual Studio Code can be found here.

We recommend using WSL on Windows, or native Linux, which the rest of this readme describes. We currently have instructions for

Windows, with and without WSL
macOS
Linux, natively or using WSL / VM
Docker

(These will also depend on the Linux instructions.) Some of these may also be out of date or unmaintained; usually our contributors use WSL, Linux, and macOS, so these instructions should be up to date.

Windows

For Windows 10 or 11, install WSL and a distribution by following this WSL Installation Guide. We recommend using Ubuntu 20.04 as the Linux distribution.

For older versions of Windows, install a Linux VM or refer to either Cygwin or Docker instructions.

Linux (Native or under WSL / VM)

1. Install build dependencies

The build process has the following package requirements:

git
build-essential
binutils-mips-linux-gnu
python3
libpng-dev

Under Debian / Ubuntu (which we recommend using), you can install them with the following commands:

sudo apt-get update
sudo apt-get install git build-essential binutils-mips-linux-gnu python3 libpng-dev

If you are using GCC as the compiler for Ocarina of Time, you will also need:

gcc-mips-linux-gnu

2. Clone the repository

N.B. If using WSL, we strongly encourage you to clone into WSL's Linux filesystem using Linux's git. Cloning into the Windows filesystem will result in much slower read/write speeds, and often causes issues when Windows copies the files with the wrong line endings, which the compiler IDO cannot handle correctly.

Clone https://github.com/HackerN64/HackerOoT.git where you wish to have the project, with a command such as:

git clone https://github.com/HackerN64/HackerOoT.git

This will copy the GitHub repository contents into a new folder in the current directory called HackerOoT. Change into this directory before doing anything else:

cd HackerOoT

3. Prepare a base ROM

Copy over your copy of the Master Quest (Debug) ROM inside the root of this new project directory. Rename the file to "baserom_original.z64", "baserom_original.n64" or "baserom_original.v64", depending on the original extension.

4. Setup the ROM and build process

Setup and extract everything from your ROM with the following command:

make setup

This will generate a new ROM called "baserom.z64" that will have the overdump removed and the header patched. It will also extract the individual assets from the ROM.

5. Build the ROM

Run make to build the ROM. Make sure your path to the project is not too long, otherwise this process may error.

make

If all goes well, a new ROM called "zelda_ocarina_mq_debug.z64" should be built and the following text should be printed:

tools/elf2rom -cic 6105 zelda_ocarina_mq_dbg.elf zelda_ocarina_mq_dbg.z64

NOTE: to speed up the build, you can either:

pass -jN to make setup and make, where N is the number of threads to use in the build. The generally-accepted wisdom is to use the number of virtual cores your computer has.
pass -j to make setup and make, to use as many threads as possible, but beware that this can use too much memory on lower-end systems.

Both of these have the disadvantage that the ordering of the terminal output is scrambled, so for debugging it is best to stick to one thread (i.e. not pass -j or -jN).

Compression and Wii Virtual Console support

Nintendo 64 games are using compression to fit the game in a cartridge, this is why you can see 64MB and 32MB (or less) roms. Currently, HackerOoT supports YAZ0, LZO and APLIB compression algorithms.

Run make compress to build a rom and compress it, to choose between YAZ0, LZO or APLIB, either edit the COMPRESS variable in the Makefile, or simply execute make compress COMPRESSION=yaz make compress COMPRESSION=lzo or make compress COMPRESSION=aplib.

For more informations about the algorithms, you can read Z64.me's encoding readme.

HackerOoT supports Wii Virtual Console too! To make a compatible wad, place the original Zelda: Ocarina of Time US (1.2) wad in the root folder of the workspace, rename it basewad.wad then run make wad (you will need to run make clean first if you execute make wad after either make compress or make).

The control mapping on Wii VC will be the following:

N64 A -> GCN A
N64 B -> GCN B
N64 C-Right -> GCN X and GCN C-Stick Right
N64 C-Left -> GCN Y and GCN C-Stick Left
N64 C-Up-> GCN C-Stick Up
N64 C-Down -> GCN Z
N64 Z -> GCN L
N64 R -> GCN R
N64 L -> GCN C-Stick Down

Note that you can use the Wii Classic Controller too.

Contributing

All contributions are welcome. This is a group effort, and even small contributions can make a difference. Some tasks also don't require much knowledge to get started.

Most discussions happen on our Discord Server, where you are welcome to ask if you need help getting started, or if you have any questions regarding this project and other decompilation projects.

Trueffeloot/HackerOoT