/xfrpc

The xfrpc project is an implementation of frp client written in C language for OpenWRT and IOT system. The main motivation of this project is to provide a lightweight solution for devices with limited resources such as OpenWRT devices which often have limited ROM and RAM space.

Primary LanguageCGNU General Public License v3.0GPL-3.0

xfrpc

What is xfrpc

The xfrpc project is an implementation of frp client written in C language for OpenWRT and IOT system. The main motivation of this project is to provide a lightweight solution for devices with limited resources such as OpenWRT devices which often have limited ROM and RAM space. The project aims to provide a frp client that uses less space and memory than other available options.

Development Status

xfrpc partially compitable with latest frp release feature, It targets to fully compatible with latest frp release.

the following table is detail compatible feature:

Feature xfrpc frpc
tcp Yes Yes
tcpmux Yes Yes
http Yes Yes
https Yes Yes
custom_domains Yes Yes
subdomain Yes Yes
socks5 Yes No
use_encryption No Yes
use_compression No Yes
udp No Yes
p2p No Yes
xtcp No Yes
stcp No Yes

Architecture

Architecture

Sequence Diagram

sequenceDiagram
	title:	xfrpc与frps通信交互时序图
	participant 本地服务
	participant xfrpc
  participant frps
  participant 远程访问用户
  
  xfrpc ->> frps  : TypeLogin Message
  frps ->> xfrpc  : TypeLoginResp Message
  Note right of frps  : 根据Login信息里面的pool值,决定给xfrpc发送几条TypeReqWorkConn请求信息
  frps ->> xfrpc  : frps aes-128-cfb iv[16] data
  frps -->> xfrpc : TypeReqWorkConn Message
	loop 根据Login中的PoolCount创建工作连接数
  	xfrpc -->> frps  : TypeNewWorkConn Message
  	Note left of xfrpc  : 与服务器创建代理服务工作连接,并请求新的工作连接请求
  	Note right of frps  : 处理xfrpc端发送的TypeNewWorkConn消息,注册该工作连接到连接池中
  	frps ->> xfrpc  : TypeStartWorkConn Message
  	Note left of xfrpc  : 将新创建的工作连接与代理的本地服务连接做绑定
	end
  xfrpc ->> frps  : xfrpc aes-128-cfb iv[16] data
  loop 用户配置的代理服务数
  	xfrpc -->> frps : TypeNewProxy Message
  	frps -->> xfrpc : NewProxyResp Message
  end
	
  loop 心跳包检查
    xfrpc -->> frps : TypePing Message
    frps -->> xfrpc : TypePong Message
  end
  
  远程访问用户 ->> frps   : 发起访问
  frps ->> xfrpc	 : TypeStartWorkconn Message
  loop  远程访问用户与本地服务之间的交互过程
    frps ->> xfrpc         : 用户数据
    xfrpc ->> 本地服务      : 用户数据
    本地服务 ->> xfrpc      : 本地服务数据
    xfrpc ->> frps         : 本地服务数据
    frps  ->> 远程访问用户  : 本地服务数据
  end
  

How to build

Build on Ubuntu 20.04.3 LTS

To run xfrpc on Ubuntu 20.04 LTS, you will need to have the following libraries installed: libevent, openssl-dev, and json-c. Use the following command in your terminal to install these libraries:

sudo apt-get update
sudo apt-get install -y libjson-c-dev libevent-dev libssl-dev

Once the required libraries are installed, you can download the xfrpc source code by forking the xfrpc repository on GitHub and then cloning it to your local machine using the following command:

git clone https://github.com/${YOUR_GITHUB_ACCOUNT_NAME}/xfrpc.git

Navigate to the xfrp directory and create a build directory by using these commands:

cd xfrp
mkdir build

Use the following commands to build and install xfrpc:

cmake ..
make

This will compile xfrpc and create an executable in the build directory. You can then run xfrpc using the executable by running the appropriate command in terminal.

Build xfrpc by Built-in thirdparty

use Built-in thirdparty build xfrpc.

require cmake version > 3.1.

To build xfrpc using the built-in third-party libraries, you can fork the xfrpc repository on GitHub and then clone it locally. Then, navigate to the xfrp directory, create a build directory, and use cmake to configure the build.

git clone https://github.com/${YOUR_GITHUB_ACCOUNT_NAME}/xfrpc.git
cd xfrp
mkdir build
cmake -D THIRDPARTY_STATIC_BUILD=ON ..
make

By setting THIRDPARTY_STATIC_BUILD=ON the build process will use the libraries that are included in the xfrpc source code, instead of using the libraries installed on your system.

The THIRDPARTY_STATIC_BUILD parameter is default set to OFF, which means that by default the build process will use the libraries installed on your system.

It's important to note that you will need cmake version greater than 3.1 to use this feature.

Cross-compile xfrpc by Built-in thirdparty

The method of compiling arm architecture or mips architecture xfrpc under x86 architecture is as follows.

Test on Ubuntu 22.04 LTS

Cross-compile mips architecture xfrpc(only support linux mips, irix mips don't supported) If can't run in special mips architecture, Modify the CMakeLists.txt in the thirdparty folder and change the linux-mips32 string to linux-generic32.After modify can work.

sudo apt-get install gcc-mips-linux-gnu # install mips-gcc compiler
mkdir build && cd build
cmake -DTHIRDPARTY_STATIC_BUILD=mips -DCMAKE_C_COMPILER=mips-linux-gnu-gcc ..
make

CMAKE_C_COMPILER flag is the path of your cross compiler.I recommend that you put this in an environment variable.

Cross-compile arm architecture xfrpc

sudo apt-get install arm-linux-gnueabihf-gcc
mkdir build && cd build
cmake -DTHIRDPARTY_STATIC_BUILD=arm -DCMAKE_C_COMPILER=arm-linux-gnueabihf-gcc ..
make

Build static binary in Alpine container

Under project root directory

$ DOCKER_BUILDKIT=1 docker build --output out . -f docker/Dockerfile

$ ls out/
xfrpc

Build on OpenWrt master

xfrpc is included in the OpenWrt community since version 1.04.515, which allows users to easily include it in their custom firmware images. It is recommended to use the latest version of xfrpc as it may have bug fixes and new features.

To include xfrpc in your OpenWrt firmware image, you can use the make menuconfig command to open the configuration menu. In the menu, navigate to "Network" and select "Web Servers/Proxies" and then select xfrpc. This will include xfrpc in the firmware image that will be built.

Build xfrpc with asan(For detect memory leak)

When encountering a segment fault, please use the following command to compile xfrpc:

cmake -DCMAKE_BUILD_TYPE=Debug ..

Now your xfrpc can detect memory leak.We will add it in ci flow in future.

Quick start for use

before using xfrpc, you should get frps server: frps

frps is a server-side component of the FRP (Fast Reverse Proxy) system and it is used to forward incoming connections to xfrpc.

  • frps

To run frps, you can use the following command, providing it with the path to the frps configuration file:

./frps -c frps.ini

A sample frps.ini configuration file is provided in the example, which binds frps to listen on port 7000.

# frps.ini
[common]
bind_port = 7000
  • xfrpc tcp support

xfrpc is a client-side component of the FRP system and it can be used to forward TCP connections. To forward incoming TCP connections to a local service, you can configure xfrpc with the following example in xfrpc_mini.ini file

#xfrpc_mini.ini 
[common]
server_addr = your_server_ip
server_port = 7000

[ssh]
type = tcp
local_ip = 127.0.0.1
local_port = 22
remote_port = 6128

This configuration tells the frp server (frps) to forward incoming connections on remote port 6128 to the xfrpc client. The xfrpc client, in turn, will forward these connections to the local service running on IP address 127.0.0.1 and port 22.

  • xfrpc http&https support

Supporting HTTP and HTTPS in xfrpc requires additional configuration compared to supporting just TCP. In the frps.ini configuration file, the vhost_http_port and vhost_https_port options must be added to specify the ports that the frp server (frps) will listen on for incoming HTTP and HTTPS connections.

# frps.ini
[common]
bind_port = 7000
vhost_http_port = 80
vhost_https_port = 443

It is important to ensure that the xfrpc client is properly configured to communicate with the frp server by specifying the correct server address and port in the xfrpc configuration file.

# xfrpc_mini.ini 
[common]
server_addr = x.x.x.x
server_port = 7000

[http]
type = http
local_port = 80
local_ip = 127.0.0.1
custom_domains = www.example.com

[https]
type = https
local_port = 443
local_ip = 127.0.0.1
custom_domains = www.example.com

The FRP server (frps) will forward incoming HTTP and HTTPS connections to the domain "www.example.com" to the location where xfrpc is running on the local IP and port specified in the configuration file (127.0.0.1:80 and 127.0.0.1:443 respectively).

It is important to note that the domain name "www.example.com" should be pointed to the public IP address of the FRP server (frps) so that when a user's HTTP and HTTPS connections visit the domain, the FRP server can forward those connections to the xfrpc client. This can be done by configuring a DNS server or by using a dynamic DNS service.

  • Run in debug mode

In order to troubleshooting problem when run xfrpc, you can use debug mode. which has more information when running.

xfrpc -c frpc_mini.ini -f -d 7 
  • Run in release mode :
xfrpc -c frpc_mini.ini -d 0

It is important to note that running xfrpc in release mode will generate less log output and will run faster than in debug mode, so it is the recommended way to run xfrpc in production environment.

Openwrt luci configure ui

If you're running xfrpc on an OpenWRT device, luci-app-xfrpc is a good option to use as it provides a web-based interface for configuring and managing xfrpc. luci-app-xfrpc is a module for the LuCI web interface, which is the default web interface for OpenWRT.

luci-app-xfrpc was adopted by the LuCI project, which is the official web interface for OpenWRT. This means that it is a supported and well-maintained option for managing xfrpc on OpenWRT devices.

luci-app-xfrpc can be installed via the opkg package manager on OpenWRT and provides a user-friendly interface for configuring the xfrpc client, including options for setting up multiple connections, custom domains and more.

How to contribute our project

See CONTRIBUTING for details on submitting patches and the contribution workflow.

Contact

QQ群 : 331230369

Please support us and star our project

Star History Chart

打赏

支付宝打赏

支付宝打赏

微信打赏

微信打赏