GSI timing receiver hardware includes a large collection of slave devices. Saftlib provides a user-friendly software interface for controlling these devices. In a typcal use case, one process (saftbusd) shares access to these hardware resources on behalf of multiple client programs. Clients connect to saftbusd using a C++ library of proxy objects which represent the shared resources. The user API of for shared resources hides device register access and provides high-level functionality.
Generated with Doxygen from the master branch, the Saftlib Documentation is available here: https://gsi-cs-co.github.io/saftlib.
./autogen.sh
./configure
make installDefault installation directory prefix is /usr/local. It can be changed (for example to $HOME/.local), by running configure with the --prefix option like this
./configure --prefix=$HOME/.localIf saftbusd (or any client program) is started by non root users, the socket directory (where the socket for inter process communication is located) should be changed by setting the SAFTBUS_SOCKET_PATH environment variable. For example
export SAFTBUS_SOCKET_PATH=/tmp/saftbus # only for non-root user
export LD_LIBRARY_PATH=$HOME/.local/lib # only if installation prefix was changed to $HOME/.local
saftbusd libsaft-service.so tr0:dev/wbm0 # this blocks the terminal. Interact with saftbusd from another terminalThe following command (in a different terminal) shows all services registered on saftbusd.
export SAFTBUS_SOCKET_PATH=/tmp/saftbus # only for non-root user
export LD_LIBRARY_PATH=$HOME/.local/lib # only if installation prefix was changed to $HOME/.local
saftbus-ctl -sUsing saftbusd like this is useful for tests and development. For use in production it is recommended to do a proper installation and launch saftbusd as a systemd unit.
Version 3 of saftlib has major internal changes compared to version 2, but aims to keep the user API unchanged.
- Rewrite of the inter process communication system (saftbus)
- Better stability and performance.
- Use fewer file descriptors.
- Give up compatibility with Gio::Dbus-API for simpler code.
- Give up xslt-based code generator, a code generator written in C++ is provided (saftbus-gen).
- Give up on xml interface definition files, exported functions are identified with a special comment.
- Allow to write driver code that can be used with and without inter process communication.
- Provide a plugin mechanism to install/remove services at runtime for more flexible customization of TimingReceiver hardware, e.g. LM32 firmware and saftlib driver.
- Startup of the daemon
- A wild card character is allowed for the device name and etherbone-path:
saftbusd libsaft-service.so tr*:dev/wbm*will attach all matching devices. - For USB devices the MSI polling period in ms can be specified after the etherbone device name separated by a colon. The following example specifies a MSI polling period of 15 ms:
saftbusd libsaft-service.so tr0:dev/ttyUSB0:15 - Command to start the services is
saftbusd libsaft-service.so tr0:dev/wbm0(asaftdscript that wraps the call to saftbusd is provided, sosaftd tr0:dev/wbm0like in version 2 is still possible). - Drivers for LM32 firmware (like burst-generator and function-generator) are not loaded by default. They need to be added explicitly when starting saftbusd (see Firmware Drivers).
saftbusd libsaft-servcie.so tr0:dev/wbm0 libfg-firmware-service.so tr0if the function generator is needed on a SCU.saftbusd libsaft-service.so tr0:dev/wbm0 libbg-firmware-service.so tr0if the burst generator is needed on a TimingReceiver.
- A wild card character is allowed for the device name and etherbone-path:
- Refactoring of the driver code (ECA, IOs, MSI)
- The code is compiled into a plugin for saftbusd, i.e. it can be loaded into saftbusd at runtime and functionality can be extended with other plugins.
- Better performance of the eb-source.
- Removal of msi-source.
- All major SDB devices on the hardware have a C++ class representation.
- Simplified registration of MSI callbacks.
- Simplified setup of the Mailbox device.
- Programs can link against the driver library using proxy objects, or directly against the driver code for exclusive lower latency access to the hardware.
- The documentation of the user facing API is generated with doxygen and can be found in html/index.html after running doxygen inside of the saftlib directory.
- user facing API is compatible to saftlib major version 2 with the following additions:
- The clock generator driver remembers the setting of any IO that was configured.
- ToggleActive and InactivateAll were added to the TimingReceiver (ECA) interface. These functions modify all owned conditions on all ActionSinks.
The package contains two libraries
- libsaft-service: Driver classes and server side classes for inter process communication with the client side proxy classes. This library can be dynamically loaded into a running saftbusd.
- libsaft-proxy: Client side proxy classes for inter process communication with the driver classes. Normally, user programs are developed against the Proxy classes.
And a set of command line tools to control and interact with attached hardware devices.
- saft-ctl: Configure software action sinks on the ECA. Typically used to snoop for timing events or inject timing events into the ECA locally. Can also be used to attach and remove devices.
- saft-io-ctl: Configure output action sinks on the ECA or configure or snoop on timing receiver inputs.
- saft-pps-gen: Configure one pulse per second output signal on all outputs of the attached timing receiver. Typically used for tests.
- saft-scu-ctl: Configure the SCU bus action sink of the ECA.
- saft-ecpu-ctl: Configure the embedded CPU action sink of the ECA.
- saft-wbm-ctl: Configure the wishbone master action sink of the ECA.
- saft-clk-gen: Configure the clock generator of an output.
- saft-dm: A program that can simulate a DataMaster by locally injecting events from a file into the ECA.
- saft-eb-fwd: Report the etherbone forwarding device of an attached timing receiver. This is mainly used to access a USB-connected timing receivers with etherbone-tools while saftlib is already connected. This is needed because USB can only support one etherbone connection. Example:
eb-ls dev/ttyUSB0becomeseb-ls $(saft-eb-fwd tr0)when saftlib is connected withtr0:dev/ttyUSB0. - saft-gmt-check: Allows to check some functionalities of the General Machine Timing System (GMT).
- saft-uni: A tool for on UNILAC specific features.
- saft-lcd: Live Chain Display. This tool uses saftlib for on-line snooping and display of beam production chains.
- saft-roundtrip-latency: A test program for latency measurements of the stack (including inter process communication)
- saft-standalone-roundtrip-latency: A test program for latency measurements of the stack (without inter process communication)
- saft-burst-ctl: Controls the burst generator LM32 firmware. The libbg-firmware-service plugin needs to be loaded before this tool can be used.
- saft-fg-ctl: Controls the function generator LM32 firmware. The libft-firmware-service plugin needs to be loaded before this tool can be used.
The most common use case for saftlib, is to be used over saftbus. A running saftbusd with the libsaft-servcie.so plugin is needed and a TimingReceiver_Service has to be attached to SAFTd. This can be achieve by launching saftbusd like this (assuming that a FAIR Timing Receiver is attached to the system under /dev/wmb0):
saftbusd libsaft-service.so tr0:dev/wbm0 tr1:dev/wbm1 tr2:dev/ttyUSB0Wildcard character * is allowed, so the following line is equivalent to the previous one (if only dev/wbm0 and dev/wbm1 exist)
saftbusd libsaft-service.so tr*:dev/wbm* tr2:dev/ttyUSB0Alternatively, saftbusd can be launched without any plugins and libsaft-service.so can be loaded later using saftbus-ctl
saftbus-ctl -l libsaft-service.so tr0:dev/wbm0 tr1:dev/wbm1 tr2:dev/ttyUSB0In order to see, which plugins are loaded, which services are available on saftbusd, and which processes are connected to saftbus, saftbus-ctl can be used:
$ saftbus-ctl -s
objects:
object-path ID [owner] sig-fd/use-count interface-names
/saftbus 1 [-1] 11/1 Container
/de/gsi/saftlib 2 [-1]d SAFTd
/de/gsi/saftlib/tr0/acwbm 3 [-1] WbmActionSink ActionSink Owned
/de/gsi/saftlib/tr0/embedded_cpu 4 [-1] EmbeddedCPUActionSink ActionSink Owned
/de/gsi/saftlib/tr0/outputs/LED1 5 [-1] Output ActionSink Owned
[...]
/de/gsi/saftlib/tr0/inputs/LVDSi2 33 [-1] Input EventSource Owned
/de/gsi/saftlib/tr0/inputs/LVDSi3 34 [-1] Input EventSource Owned
/de/gsi/saftlib/tr0 35 [-1]d TimingReceiver BuildIdRom ECA ECA_Event ECA_TLU LM32Cluster Mailbox OpenDevice Reset TempSensor Watchdog WhiteRabbit
active plugins:
libsaft-service.so
connected client processes:
10 (pid=432932)If the libsaft-service plugin is running, additional devices can be attached using
saft-ctl tr5 attach dev/wbm5Devices can be removed (only if none of their child services are owned by a client process) with
saft-ctl tr5 removeThe SAFTd service can be removed (only if none of their child services are owned by a client process) with
saft-ctl tr5 quitThe saftbus tool saftbus-ctl also allows to remove services. See (saftbus) for details.
Two firmware drivers are contained in the saftlib package.
They are be compiled by the build system into separate shared libraries (libbg-firmware-service.so and libfg-firmware-service.so) and are installed together with libsaft-service.so.
The burst generator service is not part of the libsaft-service.so.
The service has to be loaded as a plugin into saftbusd. The service requires a matching firmware running on one of the user LM32 cores.
The firmware binary is installed at ${prefix}/share/saftlib/firmware/burstgen.bin and can be automatically loaded with the driver plugin.
When loading the driver plugin libbg-firmware-service.so { <saftlib-device> [lm32-core-index] } and optional lm32-core-index is provided, the plugin loader will write the firmware binary to the requested core index. There are no checks if another firmware is already running on that core.
The plugin can be loaded into a running saftbusd using saftbus-ctl, for example:
saftbus-ctl -l libbg-firmware-service.so tr0 0This will install the driver on device tr0 after loading the firmware into lm32-core 0 on this device.
The plugin can be loaded when saftbusd is started, for example:
saftbusd libsaft-service.so tr0:dev/wbm0 libbg-firmware-service.so tr0 0Before using the burst generator, the firmware has to be put into a working state with
saft-burst-ctl tr0 -i 1The function generator service is not part of libsaft-service.so. The service has to be loaded as a plugin into saftbusd. The service requires a matching firmware running on one of the user LM32 cores. SCU timing receivers are already preloaded with the function generator firmware binary. This service is meant to be used only on SCU timing receivers. The plugin can be loaded into a running saftbusd using saftbus-ctl, for example:
saftbus-ctl -l libfg-firmware-service.so tr0This will install the driver on device tr0.
By default, the driver will provide two services /de/gsi/saftlib/tr0/fg-firmware and the MasterFunctionGenerator interface /de/gsi/saftlib/tr0/fg-firmware/master_fg which bundles all available function generator channels behind one interface.
If individual channel interfaces are needed, a call to
saft-fg-ctl -d tr0 -siWill initiate the firmware to rescan the available function generator channels and provide the FunctionGenerator interface for each of them. Calling
saft-fg-ctl -d tr0 -smWill initiate the firmware to rescan the available function generator channels and provide the default interface (MasterFunctionGenerator).
In order to get the best performance out of saftlib, users should follow some basic rules:
- If a Proxy objects is used frequently int the program it should be stored instead of recreated if it is needed. For example, when new ECA conditions are frequently defined, the corresponding ActionSink Proxy should be stored instead of calling ActionSink::create() whenever an ActionSink_Proxy is needed. Reason: Creating a Proxy object has some overhead, it loads the program as well as the saftbusd server.
- Configuring the ECA takes relatively long. If many conditions should be changed, the fastest way is to create a complete new set of conditions in an inactive state, then call ToggleActive which will deactivate all active conditions and activate all inactive conditions. Then remove all inactive conditions. This results in only one reconfiguration of the ECA hardware.
There are some limitations that users should be aware of.
- It is not possible to create or destroy Proxy objects on a saftbus::SignalGroup inside a Signal callback function from the same saftbus::SignalGroup.
There are two fundamentally different ways of writing code that uses saftlib:
- The classes from saftlib can be used remotely through Proxy objects, this is shown in the first code example. In this case many processes can share the hardware resources at the same time. A saftbusd server has to be available with the saftd-service plugin loaded and a TimingReceiver hardware attached. This is probably the most common use case.
- Alternatively, the driver classes can also be used directly for lower latency (standalone, without running saftbusd). In this case the program connects directly to the hardware and no saftbusd server can run connect to the same hardware at the same time. But the program can be written in a way to provide the same functionality as saftbusd. This option might be useful when extra low latency in the hardware communication is needed.
Both options are implemented in the simple event snoop tool of the Examples section.
Example 1: A simple event snoop tool
A simple program that can be used to monitor timing events. The program configures the ECA to effectively call the function "on_action" whenever an event matches the specified event id. There are two versions of this example, showing both, shared and exclusive access to the hardware.
An example with multiple threads and different saftbus::SignalGroups.
It shows how to reuse existing conditions and react on the Destroy signal.
Example 1: A simple LM32 firmware driver
TimingReceiver hardware provides LM32 soft-core CPUs. These can be programmed with use case specific firmware. Saftlib3 allows to extend the functionality of the TimingReceiver driver with plugins.