Pinned issues
Issues
- 3
Starting Cura Makes Bluetooth heaphones flap (connect and disconnect) until cura closed.
#19195 opened by hossimo - 1
Cura 5.7.1 will not slice single layer object
#19196 opened by eSonOfAnder - 4
5.7.2 can't open stl directly from Thingiverse
#19180 opened by vini59fr - 0
Cura Doesn't Working
#19198 opened by burakturnaoglu - 0
Gyrod infill improvement with minimal wall, and empty space,
#19197 opened by PGTBoos - 1
Slice fails, then succeeded
#19193 opened by jubeormk1 - 1
Cura not slicing
#19191 opened by Aether1777 - 0
Building Cura from source in Windows running fails: DLL load failed while importing pyArcus
#19192 opened by ggtechd - 1
Slcicing failed
#19189 opened by AirbusSimWP - 1
Parameter "Initial Printing Temperature"has no effect
#19190 opened by XXLRay - 6
- 1
- 4
Really Very Slow import of .stl files
#19139 opened by redzabu - 2
Нарезка на слои не выполнена
#19181 opened by nafanya2 - 4
Two layer skirts
#19174 opened by Gphantom650 - 2
Ultimaker S5 prime tower bug. Prime tower not layiing full perimeters on bed.
#19183 opened by JHawk11 - 1
Save and reopen Project files opens a mess of parts strewn all over the place
#19184 opened by ljbeng - 2
When i click Slicing says: Slicing Failed
#19130 opened by BLAI38 - 0
Duplicate entry in cura-dark theme.json
#19175 opened by Heinekamp - 1
Elegoo cura failed slicing
#19179 opened by Bananaduck308 - 2
Unable to slice an Object with a Z height of .20mm ie a 1st layer print
#19155 opened by MikeOxawopper - 2
Printsettings on extruder 1 get over written by extruder 2.
#19166 opened by LStapp - 1
- 2
Color scheme expansion in print preview
#19177 opened by PGTBoos - 1
Cura 5.7.1. slicing failure
#19173 opened by Robavh - 0
Error: No se puede segmentar
#19172 opened by Josfraba - 1
not working
#19170 opened by nice-tie-larry - 1
project wouldnt slice
#19171 opened by mikthemadman000 - 3
Duplicated objects are printed differently
#19169 opened by T3rm1 - 1
Error slicing with tree supports
#19168 opened by lobero21 - 3
Bridging setttings over support
#19161 opened by ansonl - 3
Heavy performance problem when multiply several object
#19162 opened by nachorepara - 1
Sli
#19164 opened by Icelamacplay - 3
Could not save to /AV_Tapa Tel 609 v1.gcode: [Errno 30] Read-only file system: '/AV_Tapa Tel 609 v1.gcode'
#19145 opened by Ciruplas - 1
découpe erreur
#19160 opened by Matthias6440 - 3
Support Overhang Slicing Error
#19159 opened by MagnumRA07 - 1
slice problem
#19143 opened by KriolLima - 6
2mm support towers with tree support and small angles
#19157 opened by jonyo - 2
Blobbing with klipper after filament change
#19146 opened by FuturSole145 - 5
Movement to the right and back edge before printing
#19156 opened by loewilein - 5
Specify a gap between outer wall and inner (next) wall
#19149 opened by J12345T - 5
Add precise z-height setting.
#19147 opened by T9Air - 1
cura stopped detecting my creality cr-10s (non-pro) printer through usb
#19148 opened by 1043613lcpsorg - 1
Unexpected Error
#19142 opened by MikeOxawopper - 1
plugins/PostProcessingPlugin/scripts/PauseAtHeight.py should have a park value for the Z axis too
#19140 opened by attikov - 6
Cura crashes and displays fatal error message
#19133 opened by Neal3D - 2
The help system unable to scroll infill pattern
#19134 opened by PGTBoos - 1
slicing will fail when you have an extension open
#19138 opened by Rudewolf300 - 1
Unable to slice anything.... even calibration prints that I had just sliced and printed a few hours ago.
#19137 opened by Dan-Kroll - 0
slicer failure
#19135 opened by kenyondale