UltimateHackingKeyboard/uhk60v1-electronics

Issues

• Where can I find the files, for example in stl format, of the case for this keyboard?

  #44 opened 3 years ago by dorcu
  1

• Version 2?

  #42 opened 4 years ago by steamraven
  1

• Create automated system to compare kicad diffs

  #24 opened 9 years ago by spuder
  10

• USB line impedance seems to be really bad

  #41 opened 5 years ago by dpiegdon
  2

• Travis script throwing error

  #38 opened 6 years ago by zen
  5

• Change MKL03Z8VFK4 to MKL03Z32VFK4

  #37 opened 8 years ago by mondalaci
  0

• Create 4 layer versions of the left and right PCBs

  #34 opened 8 years ago by mondalaci
  1

• Reroute D+ and D- tracks according to USB design best practices

  #32 opened 8 years ago by mondalaci
  0

• Reverse 4P4C connector pins

  #33 opened 8 years ago by mondalaci
  0

• Replace 5 pin TVS array footprints with 6 pin footprints

  #31 opened 8 years ago by mondalaci
  1

• Protect against reverse polarity bridge cables

  #35 opened 8 years ago by mondalaci
  0

• Add more vias to the female connector board

  #36 opened 8 years ago by mondalaci
  0

• Increase minimum space between tracks to at least 12 mil wherever possible

  #7 opened 8 years ago by spuder
  1

• Reduce resistor values on the TX and RX lines

  #6 opened 8 years ago by spuder
  4

• Move via farther from the pad of CR6 on the left main PCB

  #8 opened 8 years ago by spuder
  1

• Move the parts farther from the pins of the MX switches which are too close

  #11 opened 8 years ago by spuder
  1

• Redesign the pads of the vertical PCB to not interfere with the keycap stabilizer

  #9 opened 8 years ago by spuder
  1

• Add tags for all the past revisions

  #2 opened 8 years ago by spuder
  1

• Add footprint for the optional CT05-3050-G1 reed switch

  #4 opened 8 years ago by spuder
  1

• Add pins for Matias switches if possible

  #14 opened 8 years ago by spuder
  23

• Cherry MX LED lights

  #15 opened 8 years ago by spuder
  7

• Replace 6P4C connectors with 4P4C

  #3 opened 8 years ago by spuder
  4

• Replace the spring connector with a vertical PCB that uses pogo pins

  #5 opened 8 years ago by spuder
  1

• Use larger pitch components?

  #12 opened 8 years ago by spuder
  1

• Add fixating pins to the Cherry MX module

  #13 opened 8 years ago by spuder
  1

• Want to add the opensource logo to the board?

  #30 opened 9 years ago by spuder
  2

• Parts need unique names to allow for auto routing

  #29 opened 9 years ago by spuder
  1

• Re-wrap and reposition the "Unscrew the 5 large below the keycaps..."

  #10 opened 9 years ago by spuder
  2

• USB type C connector?

  #16 opened 9 years ago by spuder
  1

• Where do you get the libraries from?

  #22 opened 9 years ago by spuder
  1

• Should TODO be split into issues?

  #1 opened 9 years ago by spuder
  1