Device not registered on ChirpStack

Question

Device not registered on ChirpStack

Opened this issue a year ago · 10 comments

I created 1 virtual GW and 1 virtual device on LWM, and redirected gateway bridge to my NAS executing ChirpStack. All on the same local network.

I can see the virtual gateway active on ChirpStack Dashboard (with localization ok).

Under the device detail on CS dashboard I can see activation data and LoRaWAN frames, but only JOIN_REQUEST/JOIN_ACCEPT ... no downlink/uplink messagge .

I reported the simulator console output. I can't understand if the problem is the simulator or the server. Seems the JOIN_accepted message is not received, but I'm not sure.

Same executing lwm simulator with make run or docker

2023/09/28 16:15:46 LWN Simulator is online...
2023/09/28 16:15:46 Autostart not enabled
2023/09/28 16:15:46 [WS]: Listen [ 192.168.10.52:8000 ]
2023/09/28 16:16:24 [WS]: Socket connected
2023/09/28 16:16:27 [SIM]: SETUP OK!
2023/09/28 16:16:27 [SIM]: START
2023/09/28 16:16:27 GW[vg1]: Setup OK!
2023/09/28 16:16:27 GW[vg1]: UDP connection with 192.168.10.250:1700
2023/09/28 16:16:27 GW[vg1]: Turn ON
2023/09/28 16:16:27 GW[vg1]: PULL DATA send
2023/09/28 16:16:27 DEV[vd1] |Activation| {A}: Setup OK!
2023/09/28 16:16:27 DEV[vd1] |Activation| {A}: Turn ON
2023/09/28 16:16:27 DEV[vd1] |Activation| {A}: JOIN REQUEST sent
2023/09/28 16:16:27 DEV[vd1] |Activation| {A}: Open RXs for 0 and 869525000
2023/09/28 16:16:27 GW[vg1]: PUSH DATA send
2023/09/28 16:16:28 GW[vg1]: PULL ACK received
2023/09/28 16:16:29 GW[vg1]: PUSH ACK received
2023/09/28 16:16:30 GW[vg1]: PULL RESP received
2023/09/28 16:16:30 GW[vg1]: TX ACK sent
2023/09/28 16:16:39 DEV[vd1] |Activation| {A}: None downlink received
2023/09/28 16:16:39 DEV[vd1] |Activation| {A}: Unjoined
2023/09/28 16:16:39 DEV[vd1] |Activation| {A}: JOIN REQUEST sent
2023/09/28 16:16:39 GW[vg1]: PUSH DATA send
2023/09/28 16:16:39 DEV[vd1] |Activation| {A}: Open RXs for 0 and 869525000
2023/09/28 16:16:40 GW[vg1]: PUSH ACK received
2023/09/28 16:16:42 GW[vg1]: PULL RESP received
2023/09/28 16:16:42 GW[vg1]: TX ACK sent

Answer 1 · 2023-09-28T14:41:46.000Z

log.zip

Here the log dowloaded from CS, from the device LoraWAN Frames paage

Answer 2 · 2023-09-30T11:39:25.000Z

Hi thank you for the notice, we are going to check the issue on OTAA join

Answer 3 · 2023-10-03T11:01:39.000Z

Seems that something is broken on source code because the built on works well, can you confirm this?

Answer 4 · 2023-10-03T12:36:01.000Z

Yes, I can confirm the release v1.0.2beta (lwnsimulator_x64.zip ) works great.

I also downloaded the source tarball from release page, compiled and executed with make run, and again it works well.

Answer 5 · 2023-10-05T09:23:37.000Z

ok then I will check the problem into the all commits xD

Answer 6 · 2023-11-24T10:12:22.000Z

Any solution to this bug? I installed this week the simulator and i have this problem too. I only view the Gateway. I can see the LoRaWAN frames (join request and accept) but no data coming from the sensor.

Answer 7 · 2023-12-06T22:17:14.000Z

Any updates on this issue? Is there at leat a temporary workaround.

Answer 8 · 2024-01-30T21:38:24.000Z

Hi, is there any solution?

Answer 9 · 2024-01-30T23:00:38.000Z

Did you try the 1.0.2 version from the releases?
https://github.com/UniCT-ARSLab/LWN-Simulator/releases/tag/v1.0.2

Answer 10 · 2024-10-01T14:45:08.000Z

This issue is caused by b247855

There is a new branch dev that aims to do a code clean up and fixes these bugs. Try that branch and let me know.