UnifiedEngineering/T-962-improvements

Issues

• Seeking Copy of T-962a+ Firmware

  #251 opened 7 months ago by GrantDraus
  4

• Is this firmware suitable for T-962 version 2.0+photo

  #255 opened 3 months ago by olegww
  2

• Flashed New Firmware Blank Screen

  #227 opened 3 years ago by Legohead259
  18

• Cold Junction handling

  #256 opened 3 months ago by ballanty
  2

• T-962 V2.0 ?

  #250 opened 7 months ago by stif
  1

• Adafruit Max3150K is not gettting recognized by the firmware

  #254 opened 3 months ago by szenieh
  1

• 2X MAX31850K from adafruit

  #222 opened 3 years ago by elmenno
  11

• Why not trying slowly moving the board instead of improving heat distribution ?

  #248 opened a year ago by zian31
  1

• Improving heat distribution

  #210 opened 3 years ago by bgrigoriu
  72

• T-962 parts?

  #253 opened 6 months ago by replaysMike
  6

• Instructions for flashing seem to be wrong?

  #247 opened a year ago by PerennialNovice
  5

• For Setup/Calibrations OFFSET Parameter for Left and Right TCs are Too Course

  #232 opened 2 years ago by borland1
  2

• I made a OpenOffice Calc sheet to help generate custom reflow profiles

  #234 opened 2 years ago by dburr
  5

• Heater and Fun runs togheter?

  #249 opened a year ago by vergo77
  2

• quite original (Elektor-modified) T962 has significant temperature difference, solder not melting

  #246 opened a year ago by PerennialNovice
  44

• Just reporting: 2023 T962 - Upgrade successful

  #243 opened a year ago by ChitlangeSahas
  1

• Timer does not start

  #244 opened a year ago by arusch
  15

• Raspberry Pi Serial Connection for flashing and Web GUI

  #242 opened 2 years ago by cinderblock
  0

• Calibration with MAX31850K connected

  #240 opened 2 years ago by georgeharker
  1

• Can't re-flash upgrade after downgrade to original firmware

  #229 opened 2 years ago by VictoriaBentell
  3

• New version T962

  #239 opened 2 years ago by BGuiGui
  1

• T-962A Screen blank after flashing new firmware

  #238 opened 2 years ago by jjosse44
  14

• Anyone Purchased T-962A+ Lately - Maybe T-962A + Mods Here Better Choice?

  #228 opened 3 years ago by jwestmoreland
  18

• [WiP] ESPHome component

  #237 opened 2 years ago by nekromant
  0

• The source codes are posted

  #236 opened 2 years ago by sevstels
  31

• "COLD JUNCTION NOT PRESENT" DS18S20 not available from DigiKey; DS18S20+PAR substituted

  #231 opened 2 years ago by CurtUSA
  5

• Flat Ribbon Cable Adapter

  #233 opened 2 years ago by borland1
  0

• Add Safety Waring to Firmware Instructions.

  #230 opened 2 years ago by boyddotee
  1

• T-962 - Asbestos inside ???

  #215 opened 3 years ago by George-2005
  1

• New T-962A+ Model - Anyone Tried This Unit Yet?

  #209 opened 3 years ago by jwestmoreland
  13

• Trying to build a custom firmware with my own reflow profiles but failing, what am I doing wrong?

  #226 opened 3 years ago by dburr
  14

• PID settings wrong

  #221 opened 3 years ago by sevstels
  10

• Add module options to documentation

  #224 opened 3 years ago by Resonanz
  7

• Temperature value mixing

  #223 opened 3 years ago by djuseeq
  2

• Thermocouple temps 20 degrees above cold junction

  #204 opened 4 years ago by Hengy
  2

• Display blank after update (2021 hardware)

  #218 opened 3 years ago by norcal88
  9

• The thermal profile execution periodically hangs

  #220 opened 3 years ago by sevstels
  3

• Still applies?

  #203 opened 4 years ago by smdjeff
  3

• Waiting for keys to be released... reboots

  #219 opened 3 years ago by dasbrowedx
  1

• Where is T962 hex file

  #217 opened 3 years ago by southern-boy
  2

• F1,F2 are not working: (T-962 Original)

  #214 opened 3 years ago by ahmadasmandar
  0

• Executable file for Reflow Controller software

  #201 opened 4 years ago by zian31
  18

• Wireless serial with esp8266

  #211 opened 3 years ago by bgrigoriu
  4

• Remelting 3D prints in salt using T962

  #213 opened 3 years ago by tpimh
  3

• Replacing the Main Fan?

  #212 opened 3 years ago by RocketCat20
  1

• Screwed Up Cold Junction Compensation

  #208 opened 3 years ago by RocketCat20
  13

• Building in VScode

  #206 opened 4 years ago by JulesGren
  11

• PCB for the better thermocouple interface

  #205 opened 4 years ago by bgrigoriu
  2

• DISPLAY REPLACMENT ISSUE

  #202 opened 4 years ago by lfusari
  0

• Left sensor reads 800 degrees?

  #200 opened 4 years ago by tiborrr
  13