pmbootstrap

Introduction | Security Warning | Supported Devices | |

Sophisticated chroot/build/flash tool to develop and install postmarketOS.

For in-depth information please refer to the postmarketOS wiki.

Requirements

2 GB of RAM recommended for compiling
Linux distribution (x86_64 or aarch64)
- Windows subsystem for Linux (WSL) does not work! Please use VirtualBox instead.
- Kernels based on the grsec patchset do not work (Alpine: use linux-vanilla instead of linux-hardened, Arch: linux-hardened is not based on grsec)
- On Alpine Linux only: apk add coreutils
Python 3.4+
OpenSSL

Usage

Assuming you have a supported device, you can build and flash a postmarketOS image by running through the following steps. For new devices check the porting guide.

First, clone the git repository and initialize your pmbootstrap environment:

$ git clone https://github.com/postmarketOS/pmbootstrap
$ cd pmbootstrap
$ ./pmbootstrap.py init

While running any pmbootstrap command, it's always useful to have a log open in a separate window where further details can be seen:

$ ./pmbootstrap.py log

It's now time to run a full build which will create the boot and system images:

$ ./pmbootstrap.py install

Once your device is connected and is ready to be flashed (e.g. via fastboot), you can run a flash of the kernel (boot) and system partitions:

$ ./pmbootstrap.py flasher flash_kernel
$ ./pmbootstrap.py flasher flash_system

After a reboot, the device will prompt for the full-disk encryption password, which you typed in the install step (unless you have disabled full-disk encryption with --no-fde). Once the partition has been unlocked it is possible to connect via SSH:

$ dhclient -v enp0s20f0u1
$ ssh user@172.16.42.1

Development

Testing

Install pytest (via your package manager or pip) and run it inside the pmbootstrap folder.

License

GPLv3