This project is just something that might help of you have a bunch of Skr boards and screens and you need to flash them all over a micro sd card.
This doesn't do any flashing. It just renames files that end with a '.cur' file extension.
Give the board 5V on the 5V and ground pins.
It should not light up.
Put in a microSD card that had it's files changed to .cur (from SKR Pro or the bigtreetech screens).
The LED should be brighter for a moment, then flash briefly at 1/second.
Take the card out.
- If you want to check the contents, go ahead, and look at the reflasherLog.txt for a log of what happened.
Put the card in the skr or screen and power it up.