V2RetroComputing/analog

Issues

• Configuration Utility not working

  #30 opened 9 months ago by ThorstenBr
  7

• Scan line emulation

  #32 opened 8 months ago by ThorstenBr
  1

• Apple II+ 80 card emulation

  #12 opened a year ago by misterblack1
  3

• Need help with my card build, almost there but not quite.

  #25 opened 9 months ago by Verault
  22

• Font configuration ist lost on reboot/power-up

  #31 opened 9 months ago by ThorstenBr
  1

• Pravetz Font

  #29 opened 9 months ago by rallepalaveev
  1

• Config utility programs card only once

  #27 opened 10 months ago by rallepalaveev
  0

• Need help with Z80 functionality

  #26 opened 10 months ago by rallepalaveev
  2

• PLD questions

  #28 opened 10 months ago by rallepalaveev
  1

• 22V10 PLD use

  #24 opened 10 months ago by rallepalaveev
  2

• Strange Characters

  #23 opened a year ago by mamejay
  2

• IOSel or DevSel to enable ExtROM

  #22 opened a year ago by rallepalaveev
  9

• nLRESET not connected

  #21 opened a year ago by rallepalaveev
  2

• Where is the AFT16V8 source code?

  #20 opened a year ago by rallepalaveev
  2

• HGR2 malfunctions.

  #19 opened a year ago by TedThompson
  5

• Kapton Tape Masked Pico W pin

  #18 opened a year ago by baz4096
  6

• Applicard mode 80 column colours

  #14 opened a year ago by roninfourseven
  16

• Issues on my II+ with the latest firmware (corruption)

  #17 opened a year ago by misterblack1
  3

• Video-7/AppleColor RGB Mode support

  #7 opened a year ago by inexorabletash
  8

• v2 Analog and Mockingboard clash

  #16 opened a year ago by roninfourseven
  3

• 5.25" Floppy disks boot and hang at V2 Analog message

  #13 opened a year ago by roninfourseven
  10

• DHGR displayed incorrectly when monochrome mode is turned on

  #15 opened a year ago by dkgrizzly
  1

• Is there a disk image with config tools for the v2 Analog

  #11 opened a year ago by roninfourseven
  4

• Auto detection still doesn't quite work right

  #4 opened a year ago by misterblack1
  2

• VGA output stays in 80 column mode after a reset

  #5 opened a year ago by misterblack1
  2

• Config commands crashing when writing to flash

  #9 opened a year ago by dkgrizzly
  1

• ROMX/ROMXe Compatibility

  #10 opened a year ago by dkgrizzly
  2

• Can you use a PALCE16V8H-5JC/4 instead of PALCE16V8H-5JC/5

  #8 opened a year ago by mamejay
  1

• Project web site down?

  #6 opened a year ago by pkooiman
  20

• Non functional Applicard mode on firmware 145; also gets stuck in that mode

  #2 opened a year ago by misterblack1
  2

• In VGA Mode and IIe mode, sometimes mousetext is displayed when the text should be flashing

  #3 opened 2 years ago by misterblack1
  4

• Programming the PAL

  #1 opened 2 years ago by mamejay
  1