VVelox/upico

uConsole RP2040 Expansion Card

μPico

What is it?

uPico is a RP2040 powered expansion card designed to enhance the capabilities of Clockwork's uConsole.

⚠️ Only R-01 and CM4 core are supported by control application. Work in progress for A04/A06 core modules.

Second project name is atto, cause 10⁻⁶ * 10^-12 = 10^-18 🤓

Features

• Internal Speakers Support
• Type-C (USB 2.0) port with programmable power switch and overcurrent protection
• 3.3V and 5V external power out with programmable switch and overcurrent protection
• RP2040 with extenal double-double PMOD compatible connector
• RP2040 controllable LED

Resources

• Schematics
• PCB Viewer
• Interactive BOM

Control app installation

1. Download latest build from Releases page
2. Extract installer: mkdir dist && tar -xzf upico_%version%.%core%.tar.gz -C dist
3. Install: cd dist && sudo ./install.sh
4. Cleanup: cd .. && rm -rf dist
5. Print help: upico help

Building control app from sources

1. Install rustup by following the instructions at https://rustup.rs
2. Clone this repo: git clone git@github.com:dotcypress/upico.git && cd upico
3. Build: cargo build --release
4. Install app: sudo cp target/release/upico /usr/local/bin/
5. Install service: sudo cp upico.service /etc/systemd/system/
6. Enable service: sudo systemctl enable upico
7. Start service: sudo systemctl start upico
8. Print help: upico help

Flash firmware

1. wget https://rptl.io/pico-blink
2. upico install pico-blink or upico install -m pico-blink if automount is disabled for hot-plug devices.

See other examples: https://github.com/raspberrypi/pico-examples

High level design diagram

GPIO Header Pinout

╔══════╦══════╗
║ AUX  ║ AUX  ║
╠══════╬══════╣
║ VDD  ║ VDD  ║
║ GND  ║ GND  ║
║ IO3  ║ IO7  ║
║ IO2  ║ IO6  ║
║ IO1  ║ IO5  ║
║ IO0  ║ IO4  ║
╠══════╬══════╣
║ IO27 ║ IO29 ║
║ IO26 ║ IO28 ║
║ IO18 ║ IO19 ║
╠══════╬══════╣
║ VDD  ║ VDD  ║
║ GND  ║ GND  ║
║ IO11 ║ IO15 ║
║ IO10 ║ IO14 ║
║ IO9  ║ IO13 ║
║ IO8  ║ IO12 ║
╚══════╩══════╝

Errata

CM4 core & uPico PCB rev:0x02

• External 5V(AUX) programmable switch isn't supported, 5V is always present on pin header.
• Overcurrent reporting feature isn't supported.

License

Licensed under either of

• Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
• MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.