VzBoT3D/VzBoT-Vz330

Issues

• Link in Cad/Printheads is incorrect

  #71 opened 4 months ago by Wojimus
  0

• wrong vzbot sry

  #70 opened 4 months ago by NikopolCZ
  0

• Boot Video Update for Raspbian

  #58 opened a year ago by recrudesce
  13

• Vzbot

  #66 opened a year ago by hacklhill
  0

• Corrupted DXF files of panels

  #65 opened a year ago by montyx99
  3

• HDMI cutouts for mellow fly LCD would've been nice

  #64 opened a year ago by yuriy-yarosh
  2

• Add license.md files to repository

  #63 opened a year ago by HumbleDeer
  0

• full printer step opening problem

  #55 opened a year ago by Moreno-sky
  5

• Mellow 330 STL list suggested changes

  #62 opened a year ago by 1980alexGS
  4

• Add fan cover STL to Mellow STL list

  #59 opened a year ago by 1980alexGS
  1

• AWD trouble at slow speed

  #49 opened a year ago by trackhacs
  3

• Octopus Board

  #57 opened a year ago by DeForestDiamond
  1

• Vzbot

  #56 opened a year ago by yusufaLkarim
  1

• Printed Y gantry bottom has thin layer in nut hole

  #54 opened a year ago by utubosk8er
  2

• webview does not load (printed version)

  #52 opened 2 years ago by trackhacs
  3

• Swapped file names

  #50 opened 2 years ago by porkcube
  2

• VZ Eva Bltouch Dragon support?

  #23 opened 2 years ago by sn0wfl4key
  2

• Different knob-cab for NEMA17 Left and Right Motor mount with Tensioner

  #51 opened 2 years ago by EmanueleGiannuzzi
  1

• VzBot330

  #48 opened 2 years ago by activate500
  0

• Sherpa Mini mount bad geometry

  #36 opened 2 years ago by Arakon
  1

• New Release Rar Extracting Error

  #46 opened 2 years ago by chmfhm
  3

• I dont use social media and I have questions

  #37 opened 2 years ago by dkuchay
  9

• Hextrudort high motor mount feed gear problems

  #38 opened 2 years ago by FloxRoxX
  1

• No motor

  #39 opened 2 years ago by Armoth1
  4

• Source (f3d/step) files missing for dual motor mount

  #40 opened 2 years ago by tonyshackelton
  1

• [Vz330] Front Door Hinge Part 2 has 4.2mm holes to mount panel, but panel has 3.2mm holes

  #42 opened 2 years ago by Arakon
  1

• [SOLUTION] omxplayer is deprecated for splash screen

  #45 opened 2 years ago by eikaf
  1

• Aluminum Y gantry stl files

  #44 opened 2 years ago by vanatd
  3

• Missing Lm12uu mount stl file?

  #26 opened 2 years ago by quocanhcgd
  2

• klicky probe？

  #22 opened 2 years ago by psusong
  6

• made a hole punch

  #25 opened 2 years ago by psusong
  1

• Y-Gantry CAD and github page shows wrong pulley order

  #35 opened 2 years ago by Arakon
  4

• Link to cpap fan broken for USA

  #27 opened 2 years ago by kdb424
  2

• Theme contrast

  #28 opened 2 years ago by alfrix
  1

• FAN DUCT CAD WRONG

  #29 opened 2 years ago by lipk888
  1

• missing the fan base

  #30 opened 2 years ago by psusong
  3

• BOM no download link

  #33 opened 2 years ago by W141-ID
  5

• vzbot330 awd

  #34 opened 3 years ago by derkleinecs
  0

• Motor mounts inside the housing

  #24 opened 3 years ago by ckvsoft
  3

• Vz-HextrudrORT - STLs vs CAD

  #21 opened 3 years ago by FLXMM
  1

• BOM for single Z motor mount is missing 4 screws

  #20 opened 3 years ago by Polar-Ted
  1

• BOM for the aluminum front idler

  #19 opened 3 years ago by mouamart
  2

• Discord link is just a picture

  #18 opened 3 years ago by flexd
  1

• The back plate with no tensioner.stl is not suitable for new EVA 2.4.2 models

  #17 opened 3 years ago by arieslight
  8

• about pei？

  #14 opened 3 years ago by psusong
  3

• Provide CAD Nema23 Motor mount

  #15 opened 3 years ago by FLXMM
  2

• Oldham Coupler

  #11 opened 3 years ago by psusong
  6

• Wiki - Motors (Stepper)

  #13 opened 3 years ago by FLXMM
  1

• External Mount Nema23 for 0,9° Step Angle

  #12 opened 3 years ago by FLXMM
  2

• printed motor mounts

  #10 opened 3 years ago by LonyB
  2