/etherparse

A rust library for parsing ethernet & ethernet using protocols.

Primary LanguageRustApache License 2.0Apache-2.0

Crates.io docs.rs Build Status Github Build Status Gitlab Codecov

etherparse

A zero allocation library for parsing & writing a bunch of packet based protocols (EthernetII, IPv4, IPv6, UDP, TCP ...).

Currently supported are:

  • Ethernet II
  • IEEE 802.1Q VLAN Tagging Header
  • IPv4
  • IPv6 (supporting the most common extension headers, but not all)
  • UDP
  • TCP
  • ICMP & ICMPv6 (not all message types are supported)

Usage

Add the following to your Cargo.toml:

[dependencies]
etherparse = "0.13"

What is etherparse?

Etherparse is intended to provide the basic network parsing functions that allow for easy analysis, transformation or generation of recorded network data.

Some key points are:

  • It is completly written in Rust and thoroughly tested.
  • Special attention has been paid to not use allocations or syscalls.
  • The package is still in development and can & will still change.
  • The current focus of development is on the most popular protocols in the internet & transport layer.

How to parse network packages?

Etherparse gives you two options for parsing network packages automatically:

Slicing the packet

Here the different components in a packet are seperated without parsing all their fields. For each header a slice is generated that allows access to the fields of a header.

match SlicedPacket::from_ethernet(&packet) {
    Err(value) => println!("Err {:?}", value),
    Ok(value) => {
        println!("link: {:?}", value.link);
        println!("vlan: {:?}", value.vlan);
        println!("ip: {:?}", value.ip);
        println!("transport: {:?}", value.transport);
    }
}

This is the faster option if your code is not interested in all fields of all the headers. It is a good choice if you just want filter or find packets based on a subset of the headers and/or their fields.

Depending from which point downward you want to slice a package check out the functions:

Deserializing all headers into structs

This option deserializes all known headers and transferes their contents to header structs.

match PacketHeaders::from_ethernet_slice(&packet) {
    Err(value) => println!("Err {:?}", value),
    Ok(value) => {
        println!("link: {:?}", value.link);
        println!("vlan: {:?}", value.vlan);
        println!("ip: {:?}", value.ip);
        println!("transport: {:?}", value.transport);
    }
}

This option is slower then slicing when only few fields are accessed. But it can be the faster option or useful if you are interested in most fields anyways or if you want to re-serialize the headers with modified values.

Depending from which point downward you want to unpack a package check out the functions

Manually slicing & parsing packets

It is also possible to manually slice & parse a packet. For each header type there is are metods that create a slice or struct from a memory slice.

Have a look at the documentation for the Slice.from_slice methods, if you want to create your own slices:

And for deserialization into the corresponding header structs have a look at:

How to generate fake packet data?

Packet Builder

The PacketBuilder struct provides a high level interface for quickly creating network packets. The PacketBuilder will automatically set fields which can be deduced from the content and compositions of the packet itself (e.g. checksums, lengths, ethertype, ip protocol number).

Example:

use etherparse::PacketBuilder;

let builder = PacketBuilder::
    ethernet2([1,2,3,4,5,6],     //source mac
               [7,8,9,10,11,12]) //destination mac
    .ipv4([192,168,1,1], //source ip
          [192,168,1,2], //desitination ip
          20)            //time to life
    .udp(21,    //source port
         1234); //desitnation port

//payload of the udp packet
let payload = [1,2,3,4,5,6,7,8];

//get some memory to store the result
let mut result = Vec::<u8>::with_capacity(builder.size(payload.len()));

//serialize
//this will automatically set all length fields, checksums and identifiers (ethertype & protocol)
//before writing the packet out to "result"
builder.write(&mut result, &payload).unwrap();

There is also an example for TCP packets available.

Check out the PacketBuilder documentation for more informations.

Manually serialising each header

Alternativly it is possible to manually build a packet (example). Generally each struct representing a header has a "write" method that allows it to be serialized. These write methods sometimes automatically calculate checksums and fill them in. In case this is unwanted behavior (e.g. if you want to generate a packet with an invalid checksum), it is also possible to call a "write_raw" method that will simply serialize the data without doing checksum calculations.

Read the documentations of the different methods for a more details:

Roadmap

  • MutPacketSlice -> modifaction of fields in slices directly?
  • Reserializing SlicedPacket & MutSlicedPacket with corrected checksums & id's
  • IEEE 802.3

References

License

Licensed under either of Apache License, Version 2.0 or MIT license at your option. The corresponding license texts can be found in the LICENSE-APACHE file and the LICENSE-MIT file.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you shall be licensed as above, without any additional terms or conditions.