WeActStudio/WeActStudio.MiniSTM32F4x1

Issues

• CMSIS-DAP wishlist

  #48 opened 6 months ago by ALTracer
  0

• Datasheet for STM32 F405 and F446

  #47 opened a year ago by synersignart
  3

• presoldered headers

  #46 opened a year ago by NRKorsakov
  1

• Noisy 3.3v (is it a clone?)

  #45 opened a year ago by bobemoe
  4

• Whether or not the PA10 port burned out from a level of 5 volts

  #44 opened a year ago by brightproject
  0

• 3D model

  #7 opened 5 years ago by macaba
  4

• How to reflash the black pill V2.0 ?

  #43 opened 2 years ago by eagl1
  0

• Link to AliExpress legal purchase link is outdated

  #42 opened 2 years ago by erazor-de
  0

• Relevant pictures and information about Black Pill v3.1

  #41 opened 2 years ago by max-samusevich
  2

• Board improvement

  #40 opened 2 years ago by kaizen75
  0

• 10k resistor (R3) between PB2 and GND

  #39 opened 2 years ago by dikdom
  1

• Bug with ST32F411CEU6 V3.1 in arduino programming, Platformio and STM32LowPower lib (STM32duino Low Power)

  #38 opened 3 years ago by sfekilou
  0

• DOC: where are the sources for the original firmware uploaed when purchasing the device?

  #37 opened 3 years ago by ankostis
  0

• Is it possible to program the WeActV3.0 with STM32CubeIDE?

  #35 opened 3 years ago by dddomodossola
  10

• English document version

  #36 opened 3 years ago by dddomodossola
  0

• Where I can buy original STM32F401CEU6 model Black Pill?

  #34 opened 3 years ago by nanoant
  1

• 5V measured on the 3.3V pins

  #25 opened 4 years ago by szszoke
  9

• ESD Protection

  #33 opened 3 years ago by build-fails
  0

• Dismal quality of onboard buttons

  #32 opened 3 years ago by j-inc
  0

• Support for 401CCU6

  #30 opened 3 years ago by YarikYar
  1

• STM32L4xx for significantly better USB support

  #29 opened 3 years ago by StefanBruensLC
  0

• Flashing via ST-Link V3

  #26 opened 4 years ago by szszoke
  5

• digitalWrite outputs 3.3V even though the board is 5V feeded

  #28 opened 4 years ago by Akrai
  7

• stm32 xtal oscillator need Rext

  #27 opened 4 years ago by cypacmori
  0

• Making USB OTG work with the Blackpill V3.0 board

  #24 opened 4 years ago by cgo
  1

• External power supply + USB at the same time

  #2 opened 5 years ago by flatpedals
  4

• Power supply for connecting USB keyboard

  #23 opened 4 years ago by pbadun
  0

• USB HID not working on F411CEU6 using Micropython

  #17 opened 4 years ago by womei
  3

• Official AliExpress store?

  #21 opened 4 years ago by linuxtim
  5

• WeAct Studio WeiXing Store on AliExpress

  #16 opened 4 years ago by fivdi
  4

• Maybe link to this Review with Rust tutorial?

  #20 opened 4 years ago by tim-seoss
  0

• SVD file

  #18 opened 4 years ago by luuke
  0

• How is "blackpill" ADC analog voltage supplied?

  #15 opened 4 years ago by derek-eder
  1

• Unrecognized Black Pill (STM32F401CCU6) in DFU mode

  #13 opened 4 years ago by kj-jondell
  2

• Micropython is crashing while trying to use UART6

  #10 opened 4 years ago by rdidyk
  1

• USER KEY CONNECTED TO?

  #9 opened 5 years ago by roboter
  1

• Documentation : how to flash blink example and run it using WeAct_HID_Bootloader

  #8 opened 5 years ago by XavierBerger
  1

• Add support of mbed-os

  #4 opened 5 years ago by ArtVN
  2

• Can it have USB Type A female socket?

  #6 opened 5 years ago by probonopd
  1

• Not powering on using USB-C cable with E-Mark

  #1 opened 5 years ago by thinxer
  6

• Schematics missing

  #3 opened 5 years ago by samveen
  2