Micron
The official Micron BOM is here.
If you want to purchase full kits there are 2 available
120x120 build
Frame Extrusions
| Misumi Part # | Qty | Notes |
|---|---|---|
| HFS3-1515-300 | 4 | Blind holes need to be drilled |
| HFS3-1515-220 | 10 | Ends need to be tapped (M3) |
| HFS3-1515-205 | 2 | |
| HFS3-1515-190 | 1 | |
| HFS3-1515-125 | 1 |
Linear Rails
| Part | Qty | Length |
|---|---|---|
| MGN7H | 6 | 150mm |
| MGN9C | 1 | 150mm |
180x180 build
Frame Extrusions
| Misumi Part # | Qty | Notes |
|---|---|---|
| HFS3-1515-350 | 4 | Blind holes need to be drilled |
| HFS3-1515-280 | 10 | Ends need to be tapped (M3) |
| HFS3-1515-265 | 2 | |
| HFS3-1515-250 | 1 | |
| HFS3-1515-180 | 1 |
Linear Rails
| Part | Qty | Length |
|---|---|---|
| MGN7H | 6 | 220mm |
| MGN9C | 1 | 220mm |
Thanks to the following people on Discord who have helped get this printer finished:
- @TheWarolf#1247
- @L.e.o.p.a.r.d#0990
- @deepfriedheroin#5006
- @JosAr#0517
- @sentein#3903
- @madcat#7838
- @Kyrios#5486
- @faithblinded#1491
- @zruncho#1790
- @Finn#2449
- @clee#1337
- @slidr#4412
- @gfunnymoney#3748