Willlum

Pinned Repositories

ArduinoSerialCommand
An Arduino library to tokenize and parse commands received over a serial port.
Language:C++0 0 00
BallBoi
This is a personal project that currently uses a MKS Gen 2.1 CNC board to create a bluetooth controlled tennis ball machine.
Language:C++1 1 00
Bitmap_Image_Editor
Language:C++0 1 00
Distortion_Filter
Language:C0 1 00
ECE381_Variable_PSU
Final project for ECE 381. I created a variable current and voltage controlled power supply using a boost topology with a low side current monitor. For the microcontroller I used a PSOC 5. The unit was controlled with an encoder and buttons and a LCD interface.
Language:C0 1 00
fastai
The fastai deep learning library
Language:Jupyter Notebook0 0 00
fpga_fir_filter
Language:Python0 1 00
MIPS_CPU
Language:Verilog0 1 00
Model_M_Blu
Model M buckling spring keyboard modified to use bluetooth by replacing the stock controller board with a huzzah32 and lipo battery.
Language:C++1 3 00
TeensyGuitarPedal
The TeensyGuitarPedal was my senior design project that involved the use of a custom made PCB for guitar/analog device interfacing and an LCD and encoders for human interfacing, base Teensy audio processing libraries, and custom written signal processing functions to create a platform for a GUI controlled multieffects pedal.
Language:C++0 1 00

Willlum's Repositories

Willlum/BallBoi
This is a personal project that currently uses a MKS Gen 2.1 CNC board to create a bluetooth controlled tennis ball machine.
Language:C++1 1 00
Willlum/Model_M_Blu
Model M buckling spring keyboard modified to use bluetooth by replacing the stock controller board with a huzzah32 and lipo battery.
Language:C++1 3 00
Willlum/ArduinoSerialCommand
An Arduino library to tokenize and parse commands received over a serial port.
Language:C++0 0 00
Willlum/Bitmap_Image_Editor
Language:C++0 1 00
Willlum/Distortion_Filter
Language:C0 1 00
Willlum/ECE381_Variable_PSU
Final project for ECE 381. I created a variable current and voltage controlled power supply using a boost topology with a low side current monitor. For the microcontroller I used a PSOC 5. The unit was controlled with an encoder and buttons and a LCD interface.
Language:C0 1 00
Willlum/fastai
The fastai deep learning library
Language:Jupyter Notebook0 0 00
Willlum/fpga_fir_filter
Language:Python0 1 00
Willlum/MIPS_CPU
Language:Verilog0 1 00
Willlum/TeensyGuitarPedal
The TeensyGuitarPedal was my senior design project that involved the use of a custom made PCB for guitar/analog device interfacing and an LCD and encoders for human interfacing, base Teensy audio processing libraries, and custom written signal processing functions to create a platform for a GUI controlled multieffects pedal.
Language:C++0 1 00
Willlum/PongBot
Language:Python1 0
Willlum/ps2kbdlib
PS2 keyboard library for ESP32 or Arduino
Language:C++0 0
Willlum/Ruby_Amp
1 0