Getting Cypress QRDA Cat III validation errors.

Question

Getting Cypress QRDA Cat III validation errors.

Opened this issue 7 years ago · 12 comments

Hi, I am getting QRDA Cat III validation errors with Cypress https://cypressvalidator.healthit.gov/:

15:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'extension': [facet 'minLength'] The value '' has a length of '0'; this underruns the allowed minimum length of '1'.
15:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'extension': '' is not a valid value of the atomic type '{urn:hl7-org:v3}st'.
42:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': 'author_root' is not a valid value of the union type '{urn:hl7-org:v3}uid'.
54:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': 'authors_organization_root' is not a valid value of the union type '{urn:hl7-org:v3}uid'.
73:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': 'custodian_rganization_root' is not a valid value of the union type '{urn:hl7-org:v3}uid'.
90:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': 'legal_authenticator_root' is not a valid value of the union type '{urn:hl7-org:v3}uid'.
102:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': 'legal_authenticator_org_root' is not a valid value of the union type '{urn:hl7-org:v3}uid'.

Answer 1 · 2018-04-11T12:43:23.000Z

Same happened to me.
You are just missing some configuration on your pophealth installation.

See below how to make that configuration.
https://github.com/OSEHRA/popHealth/wiki/Cypress-System-Test

Answer 2 · 2018-04-11T21:30:12.000Z

Thanks I have the file open but I am not sure what the OID value is? Edit Config/popHealth.yml - cda_header:->:identifier:->:root (must be a OID) <<-- What is OID?

…

On Wed, Apr 11, 2018 at 7:43 AM, Adrian ***@***.***> wrote: Same happened to me. You are just missing some configuration on your pophealth installation. See below how to make that configuration. https://github.com/OSEHRA/popHealth/wiki/Cypress-System-Test — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#141 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AHtdC60Xk_GO1BtOIxy4RIZy35QBrXRuks5tnfptgaJpZM4TPSw-> .

Answer 3 · 2018-04-13T01:48:56.000Z

How do I obtain a OID?

…

On Wed, Apr 11, 2018 at 4:30 PM, Ignacio Valdes ***@***.***> wrote: Thanks I have the file open but I am not sure what the OID value is? Edit Config/popHealth.yml - cda_header:->:identifier:->:root (must be a OID) <<-- What is OID? On Wed, Apr 11, 2018 at 7:43 AM, Adrian ***@***.***> wrote: > Same happened to me. > You are just missing some configuration on your pophealth installation. > > See below how to make that configuration. > https://github.com/OSEHRA/popHealth/wiki/Cypress-System-Test > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#141 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/AHtdC60Xk_GO1BtOIxy4RIZy35QBrXRuks5tnfptgaJpZM4TPSw-> > . >

Answer 4 · 2018-04-13T02:15:38.000Z

You can get a free oid from this organization- https://www.viathinksoft.com/freeoid/request_oid.php From: Ignacio Valdes <notifications@github.com> Sent: Thursday, April 12, 2018 9:49 PM To: OSEHRA/popHealth <popHealth@noreply.github.com> Cc: Subscribed <subscribed@noreply.github.com> Subject: Re: [OSEHRA/popHealth] Getting Cypress QRDA Cat III validation errors. (#141) How do I obtain a OID?

On Wed, Apr 11, 2018 at 4:30 PM, Ignacio Valdes ***@***.***> wrote: Thanks I have the file open but I am not sure what the OID value is? Edit Config/popHealth.yml - cda_header:->:identifier:->:root (must be a OID) <<-- What is OID? On Wed, Apr 11, 2018 at 7:43 AM, Adrian ***@***.***> wrote: > Same happened to me. > You are just missing some configuration on your pophealth installation. > > See below how to make that configuration. > https://github.com/OSEHRA/popHealth/wiki/Cypress-System-Test > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#141 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/AHtdC60Xk_GO1BtOIxy4RIZy35QBrXRuks5tnfptgaJpZM4TPSw-> > . >

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#141 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/ABgjbYnh5kCPeuSVm4qq2BUaBJm25izZks5toAQKgaJpZM4TPSw-> .

Answer 5 · 2018-04-17T01:28:43.000Z

Thanks I have my OID. When I edit Config/popHealth.yml cda_header:->:identifier:->:root: and add the root identifier to add the OID and extension what is the syntax? Single quote, double quote or no quotes for the value? Will this work? cda_header: :identifier: :root: "<somenumericOID>" :extension: "<anything>"

…

On Thu, Apr 12, 2018 at 9:15 PM, peter li ***@***.***> wrote: You can get a free oid from this organization- https://www.viathinksoft.com/freeoid/request_oid.php From: Ignacio Valdes ***@***.***> Sent: Thursday, April 12, 2018 9:49 PM To: OSEHRA/popHealth ***@***.***> Cc: Subscribed ***@***.***> Subject: Re: [OSEHRA/popHealth] Getting Cypress QRDA Cat III validation errors. (#141) How do I obtain a OID? On Wed, Apr 11, 2018 at 4:30 PM, Ignacio Valdes ***@***.***> wrote: > Thanks I have the file open but I am not sure what the OID value is? > > Edit Config/popHealth.yml > > - cda_header:->:identifier:->:root (must be a OID) <<-- What is OID? > > > > On Wed, Apr 11, 2018 at 7:43 AM, Adrian ***@***.***> wrote: > >> Same happened to me. >> You are just missing some configuration on your pophealth installation. >> >> See below how to make that configuration. >> https://github.com/OSEHRA/popHealth/wiki/Cypress-System-Test >> >> — >> You are receiving this because you authored the thread. >> Reply to this email directly, view it on GitHub >> <#141 (comment) >, >> or mute the thread >> <https://github.com/notifications/unsubscribe-auth/AHtdC60Xk_ GO1BtOIxy4RIZy35QBrXRuks5tnfptgaJpZM4TPSw-> >> . >> > > — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub < #141 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/ ABgjbYnh5kCPeuSVm4qq2BUaBJm25izZks5toAQKgaJpZM4TPSw-> . — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#141 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AHtdCwlerr9wwH_Xt0kITKN_Y6rgWzaDks5toApNgaJpZM4TPSw-> .

Answer 6 · 2018-04-17T01:46:41.000Z

Also do I have to restart pophealth to get the popHealth.yml values into the system?

…

On Mon, Apr 16, 2018 at 8:28 PM, Ignacio Valdes ***@***.***> wrote: Thanks I have my OID. When I edit Config/popHealth.yml cda_header:->:identifier:->:root: and add the root identifier to add the OID and extension what is the syntax? Single quote, double quote or no quotes for the value? Will this work? cda_header: :identifier: :root: "<somenumericOID>" :extension: "<anything>" On Thu, Apr 12, 2018 at 9:15 PM, peter li ***@***.***> wrote: > You can get a free oid from this organization- > https://www.viathinksoft.com/freeoid/request_oid.php > > > > > > From: Ignacio Valdes ***@***.***> > Sent: Thursday, April 12, 2018 9:49 PM > To: OSEHRA/popHealth ***@***.***> > Cc: Subscribed ***@***.***> > Subject: Re: [OSEHRA/popHealth] Getting Cypress QRDA Cat III validation > errors. (#141) > > > > How do I obtain a OID? > > On Wed, Apr 11, 2018 at 4:30 PM, Ignacio Valdes ***@***.***> > wrote: > > > Thanks I have the file open but I am not sure what the OID value is? > > > > Edit Config/popHealth.yml > > > > - cda_header:->:identifier:->:root (must be a OID) <<-- What is OID? > > > > > > > > On Wed, Apr 11, 2018 at 7:43 AM, Adrian ***@***.***> > wrote: > > > >> Same happened to me. > >> You are just missing some configuration on your pophealth installation. > >> > >> See below how to make that configuration. > >> https://github.com/OSEHRA/popHealth/wiki/Cypress-System-Test > >> > >> — > >> You are receiving this because you authored the thread. > >> Reply to this email directly, view it on GitHub > >> <#141 (comment) > >, > >> or mute the thread > >> <https://github.com/notifications/unsubscribe-auth/ > AHtdC60Xk_GO1BtOIxy4RIZy35QBrXRuks5tnfptgaJpZM4TPSw-> > >> . > >> > > > > > > > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub < > #141 (comment)> , > or mute the thread <https://github.com/notificati > ons/unsubscribe-auth/ABgjbYnh5kCPeuSVm4qq2BUaBJm25izZks5toAQKgaJpZM4TPSw-> > . > > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#141 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/AHtdCwlerr9wwH_Xt0kITKN_Y6rgWzaDks5toApNgaJpZM4TPSw-> > . >

Answer 7 · 2018-04-17T02:34:29.000Z

So I tried it with and without quotes, service apache2 restart-->loaded Cypress deck-->export-->validate. Vendor ID for product in the Cypress portal is set to <myOIDnumber>. I am down to these validation errors on all 5 of the root values entered into Config/pophealth.yml: 42:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': '<myOIDnumber>' is not a valid value of the union type '{urn:hl7-org:v3}uid'. 54:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': '<myOIDnumber>' is not a valid value of the union type '{urn:hl7-org:v3}uid'. 73:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': '<myOIDnumber>' is not a valid value of the union type '{urn:hl7-org:v3}uid'. 90:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': '<myOIDnumber>' is not a valid value of the union type '{urn:hl7-org:v3}uid'. 102:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': '<myOIDnumber>' is not a valid value of the union type '{urn:hl7-org:v3}uid'. file looks fine for example with this line: <id root="<myOIDnumber>" extension="Astro"/> giving an error.

…

On Mon, Apr 16, 2018 at 8:46 PM, Ignacio Valdes ***@***.***> wrote: Also do I have to restart pophealth to get the popHealth.yml values into the system? On Mon, Apr 16, 2018 at 8:28 PM, Ignacio Valdes ***@***.***> wrote: > Thanks I have my OID. When I edit Config/popHealth.yml > cda_header:->:identifier:->:root: and add the root identifier to add the > OID and extension what is the syntax? Single quote, double quote or no > quotes for the value? > > Will this work? > > cda_header: > :identifier: > :root: "<somenumericOID>" > :extension: "<anything>" > > > On Thu, Apr 12, 2018 at 9:15 PM, peter li ***@***.***> > wrote: > >> You can get a free oid from this organization- >> https://www.viathinksoft.com/freeoid/request_oid.php >> >> >> >> >> >> From: Ignacio Valdes ***@***.***> >> Sent: Thursday, April 12, 2018 9:49 PM >> To: OSEHRA/popHealth ***@***.***> >> Cc: Subscribed ***@***.***> >> Subject: Re: [OSEHRA/popHealth] Getting Cypress QRDA Cat III validation >> errors. (#141) >> >> >> >> How do I obtain a OID? >> >> On Wed, Apr 11, 2018 at 4:30 PM, Ignacio Valdes ***@***.***> >> wrote: >> >> > Thanks I have the file open but I am not sure what the OID value is? >> > >> > Edit Config/popHealth.yml >> > >> > - cda_header:->:identifier:->:root (must be a OID) <<-- What is OID? >> > >> > >> > >> > On Wed, Apr 11, 2018 at 7:43 AM, Adrian ***@***.***> >> wrote: >> > >> >> Same happened to me. >> >> You are just missing some configuration on your pophealth >> installation. >> >> >> >> See below how to make that configuration. >> >> https://github.com/OSEHRA/popHealth/wiki/Cypress-System-Test >> >> >> >> — >> >> You are receiving this because you authored the thread. >> >> Reply to this email directly, view it on GitHub >> >> <#141 (comment) >> -380438093>, >> >> or mute the thread >> >> <https://github.com/notifications/unsubscribe-auth/AHtdC60Xk >> _GO1BtOIxy4RIZy35QBrXRuks5tnfptgaJpZM4TPSw-> >> >> . >> >> >> > >> > >> >> >> >> — >> You are receiving this because you are subscribed to this thread. >> Reply to this email directly, view it on GitHub < >> #141 (comment)> >> , or mute the thread <https://github.com/notificati >> ons/unsubscribe-auth/ABgjbYnh5kCPeuSVm4qq2BUaBJm25izZks5toAQ >> KgaJpZM4TPSw-> . >> >> >> — >> You are receiving this because you authored the thread. >> Reply to this email directly, view it on GitHub >> <#141 (comment)>, >> or mute the thread >> <https://github.com/notifications/unsubscribe-auth/AHtdCwlerr9wwH_Xt0kITKN_Y6rgWzaDks5toApNgaJpZM4TPSw-> >> . >> > >

Answer 8 · 2018-04-17T02:55:20.000Z

Answer to all is quotes not necessary and you have to prefix the OID with the arc which in my case is 1.3.6.1.4.1 so for me the complete value is 1.3.6.1.4.1.<myOIDnumber>

…

On Mon, Apr 16, 2018 at 9:34 PM, Ignacio Valdes ***@***.***> wrote: So I tried it with and without quotes, service apache2 restart-->loaded Cypress deck-->export-->validate. Vendor ID for product in the Cypress portal is set to <myOIDnumber>. I am down to these validation errors on all 5 of the root values entered into Config/pophealth.yml: 42:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': '<myOIDnumber>' is not a valid value of the union type '{urn:hl7-org:v3}uid'. 54:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': '<myOIDnumber>' is not a valid value of the union type '{urn:hl7-org:v3}uid'. 73:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': '<myOIDnumber>' is not a valid value of the union type '{urn:hl7-org:v3}uid'. 90:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': '<myOIDnumber>' is not a valid value of the union type '{urn:hl7-org:v3}uid'. 102:0: ERROR: Element '{urn:hl7-org:v3}id', attribute 'root': '<myOIDnumber>' is not a valid value of the union type '{urn:hl7-org:v3}uid'. file looks fine for example with this line: <id root="<myOIDnumber>" extension="Astro"/> giving an error. On Mon, Apr 16, 2018 at 8:46 PM, Ignacio Valdes ***@***.***> wrote: > Also do I have to restart pophealth to get the popHealth.yml values into > the system? > > On Mon, Apr 16, 2018 at 8:28 PM, Ignacio Valdes ***@***.***> > wrote: > >> Thanks I have my OID. When I edit Config/popHealth.yml >> cda_header:->:identifier:->:root: and add the root identifier to add >> the OID and extension what is the syntax? Single quote, double quote or no >> quotes for the value? >> >> Will this work? >> >> cda_header: >> :identifier: >> :root: "<somenumericOID>" >> :extension: "<anything>" >> >> >> On Thu, Apr 12, 2018 at 9:15 PM, peter li ***@***.***> >> wrote: >> >>> You can get a free oid from this organization- >>> https://www.viathinksoft.com/freeoid/request_oid.php >>> >>> >>> >>> >>> >>> From: Ignacio Valdes ***@***.***> >>> Sent: Thursday, April 12, 2018 9:49 PM >>> To: OSEHRA/popHealth ***@***.***> >>> Cc: Subscribed ***@***.***> >>> Subject: Re: [OSEHRA/popHealth] Getting Cypress QRDA Cat III validation >>> errors. (#141) >>> >>> >>> >>> How do I obtain a OID? >>> >>> On Wed, Apr 11, 2018 at 4:30 PM, Ignacio Valdes ***@***.***> >>> wrote: >>> >>> > Thanks I have the file open but I am not sure what the OID value is? >>> > >>> > Edit Config/popHealth.yml >>> > >>> > - cda_header:->:identifier:->:root (must be a OID) <<-- What is OID? >>> > >>> > >>> > >>> > On Wed, Apr 11, 2018 at 7:43 AM, Adrian ***@***.***> >>> wrote: >>> > >>> >> Same happened to me. >>> >> You are just missing some configuration on your pophealth >>> installation. >>> >> >>> >> See below how to make that configuration. >>> >> https://github.com/OSEHRA/popHealth/wiki/Cypress-System-Test >>> >> >>> >> — >>> >> You are receiving this because you authored the thread. >>> >> Reply to this email directly, view it on GitHub >>> >> <#141 (comment) >>> -380438093>, >>> >> or mute the thread >>> >> <https://github.com/notifications/unsubscribe-auth/AHtdC60Xk >>> _GO1BtOIxy4RIZy35QBrXRuks5tnfptgaJpZM4TPSw-> >>> >> . >>> >> >>> > >>> > >>> >>> >>> >>> — >>> You are receiving this because you are subscribed to this thread. >>> Reply to this email directly, view it on GitHub < >>> #141 (comment)> >>> , or mute the thread <https://github.com/notificati >>> ons/unsubscribe-auth/ABgjbYnh5kCPeuSVm4qq2BUaBJm25izZks5toAQ >>> KgaJpZM4TPSw-> . >>> >>> >>> — >>> You are receiving this because you authored the thread. >>> Reply to this email directly, view it on GitHub >>> <#141 (comment)>, >>> or mute the thread >>> <https://github.com/notifications/unsubscribe-auth/AHtdCwlerr9wwH_Xt0kITKN_Y6rgWzaDks5toApNgaJpZM4TPSw-> >>> . >>> >> >> >

Answer 9 · 2018-04-17T12:44:48.000Z

Yes. You need to restart the Apache2 service for the new configuration to take into effect. Here is a sample configuration (only the cda header section) using bogus OIDS from my demo system. Note that the strings are all in double quotes. cda_header: :identifier: :root: "2.16.840.1.113883.3.1234.0" :extension: "osehraext" :authors: - :ids: - :root: "2.16.840.1.113883.3.1234.1" :extension: "osehra" :device: :name: 'PopHealth' :model: '5.1.0' :addresses: [] :telecoms: [] :time: :organization: :ids: - :root: "2.16.840.1.113883.3.1234.2" :extension: "osehra" :name: '' :information_recipient: :identifier: :root: :extension: "MIPS_INDIVIDUAL" :custodian: :ids: - :root: "2.16.840.1.113883.3.1234.3" :extension: "osehra" :person: :given: '' 👪 '' :organization: :ids: - :root: "2.16.840.1.113883.3.1234.4" :extension: "osehra" :name: '' :legal_authenticator: :ids: - :root: "2.16.840.1.113883.3.1234.5" :extension: "osehra" :addresses: [] :telecoms: [] :time: :person: :given: 👪 :organization: :ids: - :root: "2.16.840.1.113883.3.1234.6" :extension: "osehra" :name: '' From: Ignacio Valdes <notifications@github.com> Sent: Monday, April 16, 2018 9:47 PM To: OSEHRA/popHealth <popHealth@noreply.github.com> Cc: Subscribed <subscribed@noreply.github.com> Subject: Re: [OSEHRA/popHealth] Getting Cypress QRDA Cat III validation errors. (#141) Also do I have to restart pophealth to get the popHealth.yml values into the system?

On Mon, Apr 16, 2018 at 8:28 PM, Ignacio Valdes ***@***.***> wrote: Thanks I have my OID. When I edit Config/popHealth.yml cda_header:->:identifier:->:root: and add the root identifier to add the OID and extension what is the syntax? Single quote, double quote or no quotes for the value? Will this work? cda_header: :identifier: :root: "<somenumericOID>" :extension: "<anything>" On Thu, Apr 12, 2018 at 9:15 PM, peter li ***@***.***> wrote: > You can get a free oid from this organization- > https://www.viathinksoft.com/freeoid/request_oid.php > > > > > > From: Ignacio Valdes ***@***.***> > Sent: Thursday, April 12, 2018 9:49 PM > To: OSEHRA/popHealth ***@***.***> > Cc: Subscribed ***@***.***> > Subject: Re: [OSEHRA/popHealth] Getting Cypress QRDA Cat III validation > errors. (#141) > > > > How do I obtain a OID? > > On Wed, Apr 11, 2018 at 4:30 PM, Ignacio Valdes ***@***.***> > wrote: > > > Thanks I have the file open but I am not sure what the OID value is? > > > > Edit Config/popHealth.yml > > > > - cda_header:->:identifier:->:root (must be a OID) <<-- What is OID? > > > > > > > > On Wed, Apr 11, 2018 at 7:43 AM, Adrian ***@***.***> > wrote: > > > >> Same happened to me. > >> You are just missing some configuration on your pophealth installation. > >> > >> See below how to make that configuration. > >> https://github.com/OSEHRA/popHealth/wiki/Cypress-System-Test > >> > >> — > >> You are receiving this because you authored the thread. > >> Reply to this email directly, view it on GitHub > >> <#141 (comment) > >, > >> or mute the thread > >> <https://github.com/notifications/unsubscribe-auth/ > AHtdC60Xk_GO1BtOIxy4RIZy35QBrXRuks5tnfptgaJpZM4TPSw-> > >> . > >> > > > > > > > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub < > #141 (comment)> , > or mute the thread <https://github.com/notificati > ons/unsubscribe-auth/ABgjbYnh5kCPeuSVm4qq2BUaBJm25izZks5toAQKgaJpZM4TPSw-> > . > > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#141 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/AHtdCwlerr9wwH_Xt0kITKN_Y6rgWzaDks5toApNgaJpZM4TPSw-> > . >

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#141 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/AA8hVy3xvmWAKUH0bGbmr0FxFa1n_g4Kks5tpUmCgaJpZM4TPSw-> .

Answer 10 · 2018-04-20T19:14:15.000Z

Hi, I have pophealth running, have it configured with OID, have cypress account and test decks that I am validating. I am getting no numerators, my C1 file isn't loading into cypress, and have many questions on mechanics. If anyone has time to run through the mechanics of doing this by goto meeting, please contact me off-list.

…

-- IV On Tue, Apr 17, 2018 at 7:47 AM, OSEHR Agent <notifications@github.com> wrote:

Yes. You need to restart the Apache2 service for the new configuration to take into effect. Here is a sample configuration (only the cda header section) using bogus OIDS from my demo system. Note that the strings are all in double quotes. cda_header: :identifier: :root: "2.16.840.1.113883.3.1234.0" :extension: "osehraext" :authors: - :ids: - :root: "2.16.840.1.113883.3.1234.1" :extension: "osehra" :device: :name: 'PopHealth' :model: '5.1.0' :addresses: [] :telecoms: [] :time: :organization: :ids: - :root: "2.16.840.1.113883.3.1234.2" :extension: "osehra" :name: '' :information_recipient: :identifier: :root: :extension: "MIPS_INDIVIDUAL" :custodian: :ids: - :root: "2.16.840.1.113883.3.1234.3" :extension: "osehra" :person: :given: '' 👪 '' :organization: :ids: - :root: "2.16.840.1.113883.3.1234.4" :extension: "osehra" :name: '' :legal_authenticator: :ids: - :root: "2.16.840.1.113883.3.1234.5" :extension: "osehra" :addresses: [] :telecoms: [] :time: :person: :given: 👪 :organization: :ids: - :root: "2.16.840.1.113883.3.1234.6" :extension: "osehra" :name: '' From: Ignacio Valdes ***@***.***> Sent: Monday, April 16, 2018 9:47 PM To: OSEHRA/popHealth ***@***.***> Cc: Subscribed ***@***.***> Subject: Re: [OSEHRA/popHealth] Getting Cypress QRDA Cat III validation errors. (#141) Also do I have to restart pophealth to get the popHealth.yml values into the system? On Mon, Apr 16, 2018 at 8:28 PM, Ignacio Valdes ***@***.***> wrote: > Thanks I have my OID. When I edit Config/popHealth.yml > cda_header:->:identifier:->:root: and add the root identifier to add the > OID and extension what is the syntax? Single quote, double quote or no > quotes for the value? > > Will this work? > > cda_header: > :identifier: > :root: "<somenumericOID>" > :extension: "<anything>" > > > On Thu, Apr 12, 2018 at 9:15 PM, peter li ***@***.***> > wrote: > >> You can get a free oid from this organization- >> https://www.viathinksoft.com/freeoid/request_oid.php >> >> >> >> >> >> From: Ignacio Valdes ***@***.***> >> Sent: Thursday, April 12, 2018 9:49 PM >> To: OSEHRA/popHealth ***@***.***> >> Cc: Subscribed ***@***.***> >> Subject: Re: [OSEHRA/popHealth] Getting Cypress QRDA Cat III validation >> errors. (#141) >> >> >> >> How do I obtain a OID? >> >> On Wed, Apr 11, 2018 at 4:30 PM, Ignacio Valdes ***@***.***> >> wrote: >> >> > Thanks I have the file open but I am not sure what the OID value is? >> > >> > Edit Config/popHealth.yml >> > >> > - cda_header:->:identifier:->:root (must be a OID) <<-- What is OID? >> > >> > >> > >> > On Wed, Apr 11, 2018 at 7:43 AM, Adrian ***@***.***> >> wrote: >> > >> >> Same happened to me. >> >> You are just missing some configuration on your pophealth installation. >> >> >> >> See below how to make that configuration. >> >> https://github.com/OSEHRA/popHealth/wiki/Cypress-System-Test >> >> >> >> — >> >> You are receiving this because you authored the thread. >> >> Reply to this email directly, view it on GitHub >> >> <#141 issuecomment-380438093 >> >, >> >> or mute the thread >> >> <https://github.com/notifications/unsubscribe-auth/ >> AHtdC60Xk_GO1BtOIxy4RIZy35QBrXRuks5tnfptgaJpZM4TPSw-> >> >> . >> >> >> > >> > >> >> >> >> — >> You are receiving this because you are subscribed to this thread. >> Reply to this email directly, view it on GitHub < >> #141 (comment)> , >> or mute the thread <https://github.com/notificati >> ons/unsubscribe-auth/ABgjbYnh5kCPeuSVm4qq2BUaBJm25i zZks5toAQKgaJpZM4TPSw-> >> . >> >> >> — >> You are receiving this because you authored the thread. >> Reply to this email directly, view it on GitHub >> <#141 (comment) >, >> or mute the thread >> <https://github.com/notifications/unsubscribe- auth/AHtdCwlerr9wwH_Xt0kITKN_Y6rgWzaDks5toApNgaJpZM4TPSw-> >> . >> > > — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub < #141 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/ AA8hVy3xvmWAKUH0bGbmr0FxFa1n_g4Kks5tpUmCgaJpZM4TPSw-> . — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#141 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AHtdC31wrckBtThi3lLInr5Bv55m5quoks5tpeRtgaJpZM4TPSw-> .

Answer 11 · 2018-04-23T17:04:20.000Z

Loading cypress deck successfully but I am getting no numerators. How do I get numerators?

Answer 12 · 2018-04-23T18:10:31.000Z

Here are the steps: 1. Load the Cypress test deck with a selected “Practice”. 2. Select the “Providers” menu item from the Administrator menu 3. Click on the “Practice” associated with the loading of the Cypress test deck 4. From the dashboard, select the measure associated with the Cypress test deck. You can search for the measure by typing the measure_id, e.g., CMS9v6 in the “measure or group title” input box. 5. Make sure that the Reporting Period matches the performance period of the test patients in the Cypress test desk. If you don’t know what that is, you should look into the actual QRDA CAT1 .xml file. Search for the “Reporting Period”, and you find the starting and ending date and time. After step 5 if you are still getting zero numerator, please send me the test deck. We’ll need to additional debugging to find out what when wrong. BTW, try another measure. Please verify that you are getting same results, i.e., zero numerator. Peter From: Ignacio Valdes <notifications@github.com> Sent: Monday, April 23, 2018 1:04 PM To: OSEHRA/popHealth <popHealth@noreply.github.com> Cc: peter li <lip@osehra.org>; Comment <comment@noreply.github.com> Subject: Re: [OSEHRA/popHealth] Getting Cypress QRDA Cat III validation errors. (#141) Loading cypress deck successfully but I am getting no numerators. How do I get numerators? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#141 (comment)> , or mute the thread <https://github.com/notifications/unsubscribe-auth/ABgjbd32G4yf5LknzeXYg0rS7UUaI8tiks5trgmVgaJpZM4TPSw-> .