XMegaForArduino/arduino

Issues

• XSPI.h and XSD.h

  #50 opened 2 months ago by dev-board-tech
  1

• Using Libraries

  #49 opened 10 months ago by SolveEtCoagula07
  0

• Compilation fails for ATxmega128A1

  #46 opened 4 years ago by jpelletier
  1

• Compile warning: negative left shifts

  #48 opened 3 years ago by physnoct
  0

• Compile Warning

  #47 opened 3 years ago by physnoct
  0

• USB host write to control channel often fails

  #41 opened 6 years ago by bombasticbob
  1

• need compiler support for E5 series

  #5 opened 6 years ago by bombasticbob
  7

• USB traffic can exceed hardware's ability to deal with it

  #33 opened 8 years ago by bombasticbob
  5

• USB needs to implement FIFO

  #45 opened 6 years ago by bombasticbob
  0

• DAC code needs documenting, additional testing

  #44 opened 6 years ago by bombasticbob
  0

• port latest Arduino code so that this project is consistent with it

  #42 opened 6 years ago by bombasticbob
  1

• Need to add USB MIDI library

  #31 opened 6 years ago by bombasticbob
  1

• Suggest support for xmega32A4U

  #40 opened 7 years ago by aster94
  16

• program xmega128A3U with Arduino IDE

  #43 opened 6 years ago by mkeyno
  2

• USB HID implementation is broken (needs to be fixed)

  #35 opened 8 years ago by bombasticbob
  1

• windows causing grief with USB (64-bit only)

  #37 opened 8 years ago by bombasticbob
  3

• some arduino libraries cause errors

  #38 opened 8 years ago by zdjurisic
  2

• Clock set feature to add

  #39 opened 8 years ago by zdjurisic
  2

• port caterina bootloader (and necessary core support) for USB on xmega

  #23 opened 10 years ago by bombasticbob
  6

• for any user requests for board support (pins_arduino.h)

  #7 opened 10 years ago by bombasticbob
  5

• analog inputs on PB0-7 for A1[U], A4[U] need an ARef

  #14 opened 10 years ago by bombasticbob
  3

• arduino IDE >= 1.5 now has different '3rd party vendor' board manager

  #28 opened 8 years ago by bombasticbob
  8

• 300 baud does not appear to work properly with HardwareSerial

  #36 opened 8 years ago by bombasticbob
  0

• Support for non-standard baud rates

  #27 opened 8 years ago by bombasticbob
  2

• Refactor USB implementation to make it smaller, faster, better

  #34 opened 8 years ago by bombasticbob
  0

• register de-refs (on 128a1[u]?) need 'volatile'

  #18 opened 8 years ago by bombasticbob
  1

• Bogus warnings in compilers < 4.6 for PROGMEM initialized variables

  #29 opened 8 years ago by bombasticbob
  3

• USB support for 128A1U

  #15 opened 8 years ago by bombasticbob
  12

• need to add RTC library

  #30 opened 8 years ago by bombasticbob
  2

• hardware flow control needs soft enable + pin assignments

  #4 opened 10 years ago by bombasticbob
  2

• 'wiring' protocol needs to be more forgiving on boot

  #25 opened 8 years ago by bombasticbob
  4

• unoffcials board

  #26 opened 9 years ago by pierrotm777
  2

• E5 code and A1 code need 'Tone' support

  #8 opened 10 years ago by bombasticbob
  0

• verify interrupt handling on E5

  #9 opened 10 years ago by bombasticbob
  0

• current E5 PWM implementation is LIMITED (was 'broken')

  #13 opened 10 years ago by bombasticbob
  7

• Hardware Serial does not support '1' USARTs

  #24 opened 10 years ago by bombasticbob
  2

• avrdude without patch crashes with page size > 256 bytes

  #20 opened 10 years ago by bombasticbob
  2

• avrdude 6.1 needs full support - avrdude.conf

  #21 opened 10 years ago by bombasticbob
  1

• wrong constants were in 'wiring.c' (now fixed)

  #22 opened 10 years ago by bombasticbob
  0

• bootloader flash and image files >64k

  #16 opened 10 years ago by bombasticbob
  3

• bootloader not 'flashing' on atxmega128a1u

  #17 opened 10 years ago by bombasticbob
  4

• avrdude.conf and boards.txt patches need updating

  #19 opened 10 years ago by bombasticbob
  1

• bootloader needs more universal way to create 'boot' flashable image

  #6 opened 10 years ago by bombasticbob
  5

• A1 code needs to be completed and tested

  #10 opened 10 years ago by bombasticbob
  2

• TWI pins need to map to 20,21

  #3 opened 10 years ago by bombasticbob
  1

• PWM needs to be tested and/or fixed for E5

  #11 opened 10 years ago by bombasticbob
  1

• initial pin assignments for 128a1 do not correspond to 2560 layout

  #1 opened 10 years ago by bombasticbob
  3

• new defs for EXTERNAL_NUM_INTERRUPTS etc. may be incompatible

  #12 opened 10 years ago by bombasticbob
  0

• Serial ports 2 through 7 not set up for 128a1

  #2 opened 10 years ago by bombasticbob
  3