Xilinx/open-nic

Issues

• How can we auto-recognize FEC mode like a commercial NIC?

  #26 opened 3 months ago by kevin-966
  0

• How to implement generic filter (filter_ctrl ) in qdma ?

  #22 opened 3 months ago by thenveerpk
  0

• How to implement "Port Geneve packet transfer" in qdma , I am using dpdk 2020.11 and Alveo U200 card

  #25 opened 3 months ago by thenveerpk
  0

• Assistance with MAC Address Setting for QDMA-DPDK VF

  #24 opened 3 months ago by vijayaKesavan19
  0

• Enable Promiscuous mode in QDMA

  #23 opened 3 months ago by attdone
  0

• Request to analyze issues that occurred when applying OpenNIC project using U50

  #21 opened 4 months ago by kevin-966
  0

• min_pkt_len range

  #20 opened 4 months ago by jmoya82
  0

• User Logic Box Register Addresses are Out of Date in Manual

  #19 opened 7 months ago by StonewallJohnson
  0

• Dual port CMAC drops

  #18 opened a year ago by ample-alex
  3

• Alveo u200 "Packet Length Mismatch" during DPDK pktgen and testpmd application execution

  #16 opened a year ago by attdone
  22

• Can open-nic support XCVP1202?

  #15 opened 2 years ago by xiongyiyi
  2

• RX not aligned on U50

  #14 opened 2 years ago by yrpang
  0

• Can it support sn1000?

  #13 opened 2 years ago by ltgoter
  2

• 10 Gbps support

  #11 opened 3 years ago by mclayton1000
  3

• Where can I get DPDK driver?

  #3 opened 3 years ago by hokim72
  6

• Hi, is there a whole HDL project of the OpenNIC that we can download?

  #8 opened 3 years ago by LordOfAcceleration
  1

• Vitis HLS streaming IP

  #7 opened 3 years ago by aneesullah
  3

• Card shown in lspci but not in lshw or /sys/devices/pci0000:xx

  #5 opened 3 years ago by 108anup
  4

• Any performance data avaliable?

  #1 opened 4 years ago by kaoruzhu1
  1