Xinyuan-LilyGO/LilyGo-AMOLED-Series

Issues

• Charging problem

  #59 opened a month ago by scuba-hacker
  4

• Amoled touch s3 series with black screen

  #54 opened a month ago by Mathews-mart
  12

• Does RM690B0 behaviour is the same than RM67162

  #55 opened a month ago by dobodu
  4

• T4-S3-2.41 - blinking red LED

  #52 opened 4 months ago by regha
  6

• T4-S3 (H678) SD-card pins reuse?

  #62 opened a month ago by pike2k
  7

• LilyGO T3 S4 any of the examples are compiled with: Compilation error Also Factory

  #64 opened a month ago by Robiv8
  4

• LVGL 9 support

  #65 opened a month ago by Katana1234
  0

• Pinout clarification

  #63 opened a month ago by Trolomite
  2

• How do i setup the TFT.eSPI User_Setup.h and User_Setup_Select.h i dont see the RM67162 Driver IC for the display

  #53 opened 2 months ago by BluumDK
  5

• T4-S3 GPIO18 is not free to use!

  #61 opened 2 months ago by Katana1234
  4

• ESP32 *below* V3.0 ?

  #58 opened 2 months ago by byte-for-byte
  4

• PlatformIO does not support .INO files?

  #60 opened 2 months ago by pike2k
  2

• Any difference between H619 & H713?

  #47 opened 2 months ago by beiyer838
  3

• getBattVoltage returns widely varying voltage with no battery

  #50 opened 2 months ago by MikeyMoMo
  3

• T4-S3 3D PCB model - incomplete

  #25 opened 2 months ago by pike2k
  8

• Arduino IDE ESP32 V3.0

  #57 opened 2 months ago by Arielhh
  2

• T-Display S3 AMOLED -- TFT_eSPI examples blank display

  #56 opened 3 months ago by MikeTheGent
  1

• Issue with T-display amoled V2. Not black screen or not full power off.

  #48 opened 3 months ago by fermintm
  4

• Display driver not compatible with TWAI CANBUS use. Both Arduino and esp-idf version fail.

  #44 opened 3 months ago by unxs0
  2

• isBatteryConnect always returns false

  #49 opened 3 months ago by MikeyMoMo
  1

• Typo in LilyGo_AMOLED.h

  #51 opened 3 months ago by MikeyMoMo
  1

• Watchdog gets triggered after a short while

  #33 opened 4 months ago by Daanoz
  6

• UART initialization using the 2x15 header is causing a panic

  #46 opened 4 months ago by GSGDaren
  0

• Using the IPEX antenna connector

  #40 opened 4 months ago by radioralph
  7

• Can't use Lilygo T4-S3

  #45 opened 5 months ago by julienCARR0
  4

• t s3 amoled v2

  #43 opened 5 months ago by asg02fever
  1

• How to use with LVGL from SquareLine Studio?

  #42 opened 5 months ago by The-Young-Maker
  9

• Confusion over T-Display S3 AMOLED screen settings

  #32 opened 5 months ago by samarkh
  4

• T4-S3 display driver chip strange behaviour

  #16 opened 10 months ago by clydebarrow
  23

• T-Display v1 vs v2

  #41 opened 6 months ago by roblatour
  7

• T4 STEP File

  #39 opened 6 months ago by pwm802
  1

• amoled.isBatteryConnect() always returns 0 - T-Display S3 AMOLED 1.91 v2 touch [H681]

  #31 opened 6 months ago by johnwcha
  8

• Two finger touch patterns cause loss of touch response

  #34 opened 7 months ago by Minorplanets76
  8

• 1

  #37 opened 7 months ago by ZhurbaVadym
  0

• Replacement screen for T4-S3

  #35 opened 7 months ago by richgain
  1

• Can't get Lvgl_Images.ino working on the T4-S3

  #30 opened 8 months ago by richgain
  5

• T4-S3 Portrait vs. Landscape

  #28 opened 8 months ago by GSGDaren
  5

• Screen tearing on the T-Display S3 AMOLED V1.0

  #21 opened 8 months ago by diegomacario
  7

• Turning OFF the OLED screen

  #29 opened 8 months ago by Arielhh
  2

• Top part screen keeps flickering on my T-Display S3 Amoled

  #23 opened 8 months ago by hurnyy
  3

• Wifi is very weak on t4 S3

  #26 opened 8 months ago by isthaison
  17

• T4-S3 On/Off switch does nothing

  #27 opened 8 months ago by GSGDaren
  3

• T-Display Amoled Touch version 1.91: Can't get brightness to work

  #24 opened 8 months ago by PlastiBots
  9

• Product Page says MicroPython, but where can I find examples?

  #17 opened 8 months ago by ctschach
  3

• Issues After Update (Arduino IDE)

  #18 opened 8 months ago by cairogomes
  11

• ADC: CONFLICT! driver_ng is not allowed to be used with the legacy driver

  #22 opened 9 months ago by omadab
  2

• 3D file for case?

  #20 opened 9 months ago by nicpottier
  3

• Question about settings

  #19 opened 9 months ago by Skorpionm
  1

• Home Button Callback no longer works after updating to v1.0.4

  #15 opened 10 months ago by dingrgh
  2

• AMOLED Touch display home button not working in v1.0.4.

  #14 opened 10 months ago by vpsmedeiros
  2