Xinyuan-LilyGO/LilyGo-T-RGB

Issues

• Touch on 2.8inch

  #74 opened a month ago by borkog
  8

• load image from file system slows everything

  #76 opened a month ago by borkog
  3

• I2C Issue (SPS30)

  #75 opened a month ago by Gavo4
  5

• Having trouble setting up LittleFS

  #77 opened a month ago by borkog
  1

• Problems with Programming / Examples does not work correctly

  #70 opened 3 months ago by kaiuweb-coder
  22

• i2c connector (molex?)

  #72 opened 2 months ago by borkog
  4

• Blue artifacts when displaying images

  #73 opened 2 months ago by Mld30240
  3

• 3D CAD for the 2.8in T-RGB

  #71 opened 3 months ago by martinroger
  3

• LilyGo T-RGB

  #69 opened 3 months ago by Lio74150
  28

• Touch screen with ft3267 controller not working

  #63 opened 3 months ago by aleskramzar
  3

• Ambient conditions

  #64 opened 3 months ago by Bastler1980
  3

• 3D Model/Step file for 2.8 inch T-RGB display

  #65 opened 3 months ago by clemensk83
  3

• Bad PSRAM?

  #66 opened 3 months ago by Grippy98
  3

• Need one output pin

  #68 opened 3 months ago by borkog
  1

• LilyGO T3 S4 any of the examples are compiled with: Compilation error Also Factory

  #67 opened 3 months ago by Robiv8
  1

• esp_lcd_rgb_panel_config_t

  #60 opened 5 months ago by staticengineer
  3

• External I2C

  #55 opened 5 months ago by tBubus
  5

• Arduino IDE Sketch size too large

  #58 opened 5 months ago by jsanctum
  5

• ESPHome compatibility

  #59 opened 5 months ago by sirriseyrek
  2

• How draw color by TFT?

  #53 opened 6 months ago by wang2956
  3

• Using XL9535 expander

  #56 opened 6 months ago by s54b32julian
  3

• Displays smaller sprite if using 4bits instead of 16bits

  #61 opened 6 months ago by Mike-Kuznetsov
  1

• 2.1" Half Circle Touch Sleep(?)

  #50 opened 8 months ago by IAmOrion
  3

• Home assistant

  #51 opened 8 months ago by lecrams
  3

• UART Pin?

  #52 opened 8 months ago by crackerjacques
  4

• how get image size?

  #54 opened 8 months ago by wang2956
  0

• Analog in

  #46 opened 10 months ago by ThomasSlowhand
  4

• Wake on Touch - getting the display to work again

  #48 opened 9 months ago by DrJaymz
  5

• No touch

  #49 opened 10 months ago by Suneboe
  5

• LilyGo_RGBPanel.h compile error

  #47 opened 10 months ago by savall21
  16

• Where to find wristband?

  #28 opened a year ago by jumpjack
  4

• What pin for buzzer can I use?

  #29 opened a year ago by karfly
  11

• T-Display-RGB issues running sample esp-idf project

  #32 opened a year ago by krupis
  6

• How to use 24-bit color depth mode

  #34 opened a year ago by krupis
  8

• Converting image to array - image does not display correctly

  #36 opened a year ago by extremerotary
  3

• ESP-IDF flash issue

  #37 opened a year ago by rightcornerengineering
  26

• I2C with Arduino Mega

  #38 opened a year ago by Noor-H
  3

• wrong STP file

  #39 opened a year ago by Pauldesco
  2

• Touch not working properly

  #40 opened a year ago by harishi
  3

• Where do I download the LilyGo T-RGB file?

  #45 opened a year ago by staticengineer
  2

• TRGBArduinosupport lib does not work properly

  #43 opened a year ago by ThomasSlowhand
  42

• Serial.print does not work in "Factory" example

  #41 opened a year ago by ThomasSlowhand
  2

• Debug option aside "Serial.print" with PlatformIO

  #42 opened a year ago by ThomasSlowhand
  9

• How-to drive AW9364

  #35 opened a year ago by furynick
  2

• Analog Input

  #30 opened a year ago by richard2189
  1

• Where is the 8MB PSRAM?

  #33 opened a year ago by krupis
  1

• unrecognized command line option '-std=gnu++2b'; did you mean '-std=gnu++2a'?

  #31 opened a year ago by krupis
  1

• How to create PlatformIO Partition file to use all 16MB PSRAM

  #27 opened 2 years ago by PlastiBots
  6

• Using the round 2.1 inch display: little change makes it work

  #25 opened 2 years ago by ariejoosse
  2

• Sample does not compile for 2.1" H597

  #26 opened 2 years ago by themagicm
  4