MacBook Intel CPU with MacOS 11.4 (Big Sur) can not upload anything to T5 board
solocatz opened this issue · 9 comments
For me only affect Lilygo product, my other low cost esp32 clones are fine.
Try to upload GetChipID sample:
esptool.py v3.0-dev
Serial port /dev/cu.usbmodem526F0051341
Connecting........__
Chip is ESP32-D0WDQ6-V3 (revision 3)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: 08:3a:f2:47:3b:2c
Uploading stub...
A fatal error occurred: Failed to write to target RAM (result was 01070000)
A fatal error occurred: Failed to write to target RAM (result was 01070000)
Here is a link of discussion.
ESPTool does not work on TTGO product
I have the same issue with my Macbook M1 Air on Big Sur 11.4.
Please fix!
Same issue here on Macbook intel on Big Sur 11.4
Module: LILYGO® TTGO T-Call V1.4 / V1.5 ESP32
Good news. After updating with new driver CP102 v6.0.1 from Silabs - it's finally working on my M1.
Let me know, if this works for you.
Good news. After updating with new driver CP102 v6.0.1 from Silabs - it's finally working on my M1.
Let me know, if this works for you.
This didn't work for me but I think mine has a different UART chip, a CH9102. Seems that could be the problem.
Same problem here.
As a temporary workaround I use OTA Updates to program from my MacBook.
Same problem here. Any workaround directly on Mac instead of trying to do this in Windows/linux VMs?
Same problem here.
Also dealing with the same joy as you guys! At least, together is better than alone. =)
They closed Xinyuan-LilyGO/LilyGo-T-Call-SIM800#139 today. Maybe that means their 1.5 http://www.wch-ic.com/downloads/CH341SER_MAC_ZIP.html is now fully functional on macOS, too.