Xinyuan-LilyGO/LilyGo-T5-Epaper-Series

Issues

• Sleep current on T5 2.13" v2.3.1

  #49 opened a year ago by ldab
  3

• Better build instructions please

  #60 opened 2 months ago by drder66
  1

• T5 2.13 VBAT Pin

  #59 opened 3 months ago by syoung22071958
  2

• PCB Footprints and 3D files (PCB layout) for v2.3.1/v2.3.2

  #58 opened 5 months ago by CraigHutchinson
  1

• Battery charging stops

  #57 opened 5 months ago by mjdudak
  0

• support of T5 Screen-4.7-S3

  #54 opened 8 months ago by mars3142
  1

• nothin work

  #56 opened 6 months ago by asg02fever
  0

• Which USB to COM Port Driver I need for windows 11

  #55 opened 7 months ago by Iceman808
  0

• No binary for v2.66

  #52 opened 9 months ago by digidolphin
  7

• No schematic for T5 v2.3.2? i.e. the Non 9102 chip .2 revision sold as DEPG0213BN

  #53 opened 8 months ago by CraigHutchinson
  0

• Access I2C on T-Dispay E-paper 1.02"

  #51 opened 9 months ago by dominator15
  1

• incorrect pinout on the pinout sheet

  #50 opened a year ago by rdekens
  1

• I cannot clear T5 2.31_2.13 display

  #47 opened a year ago by zsiroslaci
  2

• [DEPG0266BN] spiram: SPI RAM not initialized

  #48 opened a year ago by iw0der
  1

• SD card not working when using T5_V2.3.1_213]

  #46 opened a year ago by bruno1950
  7

• Battery charge %

  #32 opened 2 years ago by alfwro13
  6

• Which driver should I use? Seems none from Hello World example works

  #45 opened a year ago by tomasz90
  1

• Unable to communicate with T5 v2.3.2 using T-U2T

  #44 opened a year ago by StevenCellist
  12

• USB disconnects after a few seconds

  #43 opened a year ago by ramatomo
  2

• my T5 does not connect with usb port. as in the picture

  #42 opened 2 years ago by allisonwilliancandido
  1

• [Linux] Module needed to flash T5?

  #41 opened 2 years ago by Shohreh
  5

• Step files

  #39 opened 2 years ago by Metatron2k2
  4

• Identify LilyGo-T5-Epaper version -> not available on website nor board

  #40 opened 2 years ago by maxbrito500
  2

• issue with ESP32 Board Manager - EPAPER - Arduino - Board Manager

  #37 opened 2 years ago by parahooners
  0

• T5 V2.3 battery connector type?

  #38 opened 2 years ago by masterzen
  1

• Boards.h

  #36 opened 2 years ago by Rolzzz
  5

• Is there a way to check it charger is connected?

  #35 opened 2 years ago by BatsIhor
  1

• SD card reader not working [T5_V2.3.1_213] (20-8-26)

  #33 opened 2 years ago by mrWheel
  0

• Open to reorganize LilyGo-specific library

  #34 opened 2 years ago by rrainey
  1

• T5 V213 wich version ?

  #31 opened 2 years ago by echelon75
  3

• T5 2.9” V2.2 Deep Sleep Issue

  #30 opened 2 years ago by cvocvo
  4

• lewisxhe / GxEPD boards.h is missing definition for T-Display E-Paper

  #20 opened 2 years ago by ShotokuTech
  3

• Battery Voltage example

  #21 opened 2 years ago by Martenz
  2

• The T-Display 1.02 E-Paper schematic is missing

  #23 opened 2 years ago by carl3
  3

• Busy Timeout

  #28 opened 2 years ago by Ahmedriazku2
  6

• Problem achieving 300uA deepsleep current on T5 2.13" v2.3.1

  #29 opened 2 years ago by mgsb
  2

• Support in EspEasy firmware

  #18 opened 3 years ago by jbaream
  1

• Question - Any reference table of Board vs Firmware version?

  #11 opened 3 years ago by alexkoppelman
  1

• T5 V2.2 2.9" consuming too much power

  #13 opened 3 years ago by RalfJL
  4

• Problem with pixels in last rows of T5 v2.13

  #15 opened 3 years ago by jcgfsantos
  4

• MacBook Intel CPU with MacOS 11.4 (Big Sur) can not upload anything to T5 board

  #16 opened 3 years ago by solocatz
  9

• EDP47 Needs moving in to the T5 Code

  #17 opened 3 years ago by parahooners
  1

• boards.h

  #12 opened 3 years ago by Heiner1967
  1

• Specified folder/zip file does not contain a valid library

  #19 opened 3 years ago by ShotokuTech
  1

• 2.66 inch Lilygo T92_v1.0 support

  #27 opened 3 years ago by robouden
  1

• Duplicate getUTF8Width definition in lewisxhe/GxEPD causes compile errors

  #25 opened 3 years ago by carl3
  3

• T5 V2.3.1_2.13: Unknown E-Paper display, cannot find correct driver

  #26 opened 3 years ago by vidhill
  1

• Unable to use I2C

  #22 opened 3 years ago by ChristopheLaurent
  0

• Compiling error on LilyGo 2.13 ePaper display (DEPG0213BN)

  #24 opened 3 years ago by levycarneiro
  1

• Cannot upload sketch to T5 v2.13

  #14 opened 4 years ago by arcaartem
  1