ESPBox
Firmware for ESP8266 used as SD card logger using Arduino core version
Development version:
Arduino ide 1.8.0 with git from ESP8266
Using pluggin IDE
Any files on SPIFFS can be called on web interface without having the path hard coded, this give more flexibility, favicon.ico is a good example of it.
So UI is kind of separated from FW which allow easier modifications. For this a light file manager is available in extra settings page, it allows to upload/download/delete files.
Because SPIFFS is flat filesystem, no directory management is necessary, so it is very simple.
##Web configuration
*Wifi Mode : Access point / Client station
*IP Generation: DHCP/Static IP
*IP/MASK/GATEWAY for static data
*Baud Rate for serial (supported : 9600, 19200, 38400, 57600, 115200, 230400, 250000)
*web port
##Default Configuration
Default Settings:
AP:ESP8266
PW:12345678
Authentification: WPA
Mode: g (n is not supported by AP, just by STA)
channel: 11
AP: visible
Sleep Mode: Modem
IP Mode: Static IP
IP: 192.168.0.1
Mask: 255.255.255.0
GW:192.168.0.1
Baud rate: 9600
Web port:80
Web Page refresh: 3 secondes
User: admin
Password: admin
User:user
Password: user