LLM training in simple, pure C/CUDA. There is no need for 245MB of PyTorch or 107MB of cPython. Training GPT-2 (CPU, fp32) is ~1,000 lines of clean code in the single file train_gpt2.c, and training it on GPU is ~3,000 lines (adds CUDA kernels) in train_gpt2.cu. The code compiles and runs instantly, it exactly matches the PyTorch reference implementation, and currently slightly exceeds the speed of (compiled) PyTorch (with bf16, torch compile, and flash attention). I chose GPT-2 as the first working example because it is the grand-daddy of LLMs, the first time the modern stack was put together.
Our current goal is to reproduce GPT-2. For an overview of current ongoing work, see the latest State of the Union post.
I'd like this repo to only maintain C and CUDA code. Ports of this repo to other languages are very welcome, but should be done in separate repos, and then I am happy to link to them below in the "notable forks" section, just like I did in llama2.c notable forks.
The "I don't care about anything I just want to train and I have a GPU" section. Run:
pip install -r requirements.txt
python prepro_tinyshakespeare.py
python train_gpt2.py
make train_gpt2fp32cu
./train_gpt2fp32cuThe above lines (1) download the tinyshakespeare dataset, tokenize it with the GPT-2 Tokenizer, (2) download and save the GPT-2 (124M) weights, (3) init from them in C/CUDA and train for one epoch on tineshakespeare with AdamW (using batch size 4, context length 1024, total of 74 steps), evaluate validation loss, and sample some text. Note that in this quickstart we are using the fp32 version train_gpt2_fp32.cu of the CUDA code. Below in the CUDA section we document the current "mainline" train_gpt2.cu, which is still being very actively developed, uses mixed precision, and runs ~2X faster.
I want to see it go fast. In this case switch to our mainline, most optimized train_gpt2.cu and also turn on flash attention. Run:
pip install -r requirements.txt
python prepro_tinyshakespeare.py
python train_gpt2.py
make train_gpt2cu
./train_gpt2cuIf you additionally install cuDNN (see the CUDA section below), you can also go faster with flash attention
make train_gpt2cu USE_CUDNN=1
./train_gpt2cuNote that the default batch size is very low (4). If you have enough memory on your GPU, I recommend you increase this to e.g. 32:
./train_gpt2cu -b 32My standard "prod" run with a nice GPU (e.g. A100 40GB) actually trains on TinyStories instead of TinyShakespeare, and looks like this:
python prepro_tinystories.py
make train_gpt2cu USE_CUDNN=1
./train_gpt2cu -i data/TinyStories -v 250 -s 250 -g 144 -o stories.log -b 32Where I decrease the frequency of validation loss and sampling to every 250 steps, sample 144 tokens during sampling stage (to fit ~one story), and at batch size 32.
The "I am so GPU poor that I don't even have one" section. No worries, run:
pip install -r requirements.txt
python prepro_tinyshakespeare.py
python train_gpt2.py
make train_gpt2
OMP_NUM_THREADS=8 ./train_gpt2The above lines (1) download the tinyshakespeare dataset, tokenize it with the GPT-2 Tokenizer, (2) download and save the GPT-2 (124M) weights, (3) init from them in C and train for 40 steps on tineshakespeare with AdamW (using batch size 4, context length only 64), evaluate validation loss, and sample some text. Honestly, unless you have a beefy CPU (and can crank up the number of OMP threads in the launch command), you're not going to get that far on CPU training LLMs, but it might be a good demo/reference.
You'll be using the (more bleeding edge) mixed precision version of the code:
sudo apt install openmpi-bin openmpi-doc libopenmpi-dev
pip install -r requirements.txt
python prepro_tinyshakespeare.py
python train_gpt2.py
make train_gpt2cu
mpirun -np <number of GPUs on your machine> ./train_gpt2cu
Sub in the number of GPUs you'd like to run on in the last command.
Download and tokenize a dataset. The tinyshakespeare dataset is the fastest to download and tokenize:
python prepro_tinyshakespeare.pyThis prints:
Saved 32768 tokens to data/tiny_shakespeare_val.bin
Saved 305260 tokens to data/tiny_shakespeare_train.bin
The .bin files are raw byte streams of int32 numbers indicating the token ids with the GPT-2 tokenizer. Alternatively you could also tokenize the TinyStories dataset with prepro_tinystories.py.
In principle we'd be ready to train the model right here. However the baseline CPU/fp32 reference code is so inefficient that it's not practical to train these models from scratch yet. Instead, we initialize with the GPT-2 weights released by OpenAI and just do finetuning. For that, we have to download the GPT-2 weights and save them as a checkpoint we can load in C:
python train_gpt2.pyYou'll recognize this code from nanoGPT as a simple GPT-2 reference implementation in PyTorch. This script will download the GPT-2 (124M) model, overfit a single batch of data for 10 iterations, run a few steps of generation, and most importantly it will save three files: 1) the gpt2_124M.bin file that contains the raw model weights for loading in C, 2) the gpt2_124M_debug_state.bin, which also contains more debug state: the inputs, targets, logits and loss (useful for debugging and unit testing), and finally 3) the gpt2_tokenizer.bin which stores the vocabulary for the GPT-2 tokenizer, translating token ids to byte sequences of UTF-8 encoded string pieces. We can now initialize with these model weights and continue training in raw C. First compile the code:
make train_gpt2You can have a look inside the Makefile and its comments. It will try to autodetect if OpenMP is available on your system, which is very helpful for speeding up the code at very low cost of code complexity. Some people seem to experience problems compiling on Ubuntu, have a look at Issue 19, TLDR you'd want to modify the CFLAGS:
# try this first
CFLAGS="-Ofast -fno-finite-math-only -Wno-unused-result -march=native" make train_gpt2
# try this second
CFLAGS="-O3 -Wno-unused-result -march=native" make train_gpt2
Once train_gpt2 is compiled, you can run it:
OMP_NUM_THREADS=8 ./train_gpt2You should tune the number of threads depending on how many cores your CPU has. The program will load the model weights, the tokens, it will run a finetuning loop for a few iterations with Adam lr 1e-4, and then generate a sample from the model. The file is (I think) very readable and you should have a look. Simply, there are implementations for the forward and backward pass of all the layers, and they get strung together into a large, manual, forward/backward/update loop. The output looks like this on my MacBook Pro (Apple Silicon M3 Max):
[GPT-2]
max_seq_len: 1024
vocab_size: 50257
num_layers: 12
num_heads: 12
channels: 768
num_parameters: 124439808
train dataset num_batches: 1192
val dataset num_batches: 128
num_activations: 73323776
val loss 5.252026
step 0: train loss 5.356189 (took 1452.121000 ms)
step 1: train loss 4.301069 (took 1288.673000 ms)
step 2: train loss 4.623322 (took 1369.394000 ms)
step 3: train loss 4.600470 (took 1290.761000 ms)
... (trunctated) ...
step 39: train loss 3.970751 (took 1323.779000 ms)
val loss 4.107781
generating:
---
Come Running Away,
Greater conquer
With the Imperial blood
the heaviest host of the gods
into this wondrous world beyond.
I will not back thee, for how sweet after birth
Netflix against repounder,
will not
flourish against the earlocks of
Allay
---
I like how Netflix comes up, it's clear that the shadow of the training past is still lurking in the model. I did not attempt to tune the finetuning hyperparameters so it's quite likely this can be improved quite a bit. I also noticed that slightly different platforms (e.g. MacOS / Linux) will (sadly) give very slightly different results, so perhaps don't expect to get the exact numbers or generation above. Also note that if you are seeing token ids instead of text in the generation, it might be because your code is out of date, as Tokenizer decoding was added April 14, 2024. git pull the updates, and then re-run python train_gpt2.py, which will now also save the tokenizer, which C can read and then use to print text instead of token ids.
I am also attaching a simple unit test for making sure our C code agrees with the PyTorch code. Compile and run with:
make test_gpt2
./test_gpt2This now loads the gpt2_124M_debug_state.bin file, runs a forward pass, compares the logits and loss with the PyTorch reference implementation, then it does 10 iterations of training with Adam and makes sure the losses match PyTorch.
I attached a very small tutorial here, in doc/layernorm/layernorm.md. It's a simple, step-by-step guide to implementing a single layer of the GPT-2 model, the layernorm layer. This is a good starting point to understand how the layers are implemented in C.
The full training loop is also implemented in pure CUDA in one file, but optimizations of the kernels are ongoing. Currently, we roughly match the speed of PyTorch. The way we organize code is that we have a growing collection of kernels of increasing complexity in the dev/cuda folder, see dev/cuda/README.md. We then copy paste the best kernels into the main training loop in the single training file train_gpt2cu.cu.
WIP alert, April 23. We merged the first version of mixed precision training code. I checkpointed the fp32 version to separate files that include _fp32 in their filename, and would like to preserve this version in the root of the repo because it 1) doesn't require the most up to date CUDA and will a lot more likely compile and is more portable, 2) it is a lot simpler and acts as reference. In fact, we'd like to diverge the fp32 version in the direction of being pure CUDA (e.g. do not even call cuBLAS by default), to be used as an educational reference, maybe even a kernel of a course on CUDA. The "mainline" development concerned with speed will from there on move to the train_gpt2.cu file, which includes mixed precision training.
In the descriptions below I will default to using the fp32 version for now because it is currently more portable and stable, then at the end I will cover to the new mixed precision version.
Correctness. First, we can do 10 iterations of training and verify that our code exactly matches and preproduces the numbers from PyTorch:
make test_gpt2fp32cu
./test_gpt2fp32cuThis prints overall okay: 1. So the forward activations, backward gradients, and the individual loss values for 10 iterations all match exactly.
Training. To train GPT-2 in a single file of CUDA, run the train script:
make train_gpt2fp32cu
./train_gpt2fp32cuThis will load the tiny_shakespeare dataset validation and training splits. At the default settings of B=4, T=1024, there are 8 validation batches and 74 training batches. The script is currently configured to do a single epoch of finetuning with learning rate 1e-4, and along the way it evaluates the validation performance and generates samples, e.g.:
step 1/74: train loss 4.367631 (80.639749 ms)
step 2/74: train loss 4.031242 (77.378867 ms)
step 3/74: train loss 4.034144 (77.315861 ms)
step 4/74: train loss 3.859865 (77.357575 ms)
...
step 72/74: train loss 3.085081 (78.850895 ms)
step 73/74: train loss 3.668018 (78.197064 ms)
step 74/74: train loss 3.467508 (78.009975 ms)
val loss 3.516490
generating:
---
?Where will you go?
I take you wherefore I can, myself, and must.
I cast off my beak, that I may look him up on the point;
For on his rock shall he be opencast.
<|endoftext|>My little nephew:
Keep on with me, my
This runs on my A100 in about ~10 seconds. This training loop in the PyTorch script is about 80ms/iteration, so we are slightly better than PyTorch here. However, this is measured with PyTorch that is a bit stale (I'm on 2.1.0) and we're not yet including FlashAttention or the PyTorch scaled_dot_product_attention fused operation.
We can compare to naive PyTorch like this, where we turn on torch.compile and the use of TensorCores, which use tf32 type:
python train_gpt2.py --write_tensors 0 --sequence_length 1024 --batch_size 4 --compile 1 --tensorcores 1The compilation (first iteration) is ~27 seconds, but after that on my A100 this currently runs at ~80ms/iteration.
Mixed precision. The new CUDA mixed precision version, where most of the development will happen going forward, is train_gpt2.cu, along with its test test_gpt2.cu. Here, a lot of the calculations happen in lower-precision formats (fp16 or bf16), which allows us to run really fast (~2X of the TF32 performance above). Note that I describe the baseline implementation as fp32 but, to be more accurate, it is actually a tf32 (TensorFloat32). To train and test, it's the same commands just drop the fp32 parts:
make train_gpt2cu
./train_gpt2cu
make test_gpt2cu
./test_gpt2cuIf you have the latest CUDA you should expect this to compile OK, and you should see a lot more improved performance.
Flash Attention. As of May 1, 2024 we now support the Flash Attention from cuDNN. Because cuDNN bloats the compile time from a few seconds to ~minute and this code path is right now very new, this is disabled by default. You can enable it by compiling like this:
make train_gpt2cu USE_CUDNN=1This will try to compile with cudnn and run it. You have to have cuDNN installed on your system. The cuDNN installation instructions with apt-get will grab the default set of cuDNN packages. For a minimal setup, the cuDNN dev package is sufficient, e.g. on Ubuntu 22.04 for CUDA 12.x:
wget https://developer.download.nvidia.com/compute/cuda/repos/ubuntu2204/x86_64/cuda-keyring_1.1-1_all.deb
sudo dpkg -i cuda-keyring_1.1-1_all.deb
sudo apt-get update
sudo apt-get -y install libcudnn9-dev-cuda-12On top of this you need the cuDNN frontend, but this is just header files. Simply clone the repo to your disk. The Makefile currently looks for it in either your home directory or the current directory. If you have put it elsewhere, add CUDNN_FRONTEND_PATH=/path/to/your/cudnn-frontend/include to the make command-line.
Multi-GPU training. As of April 26, 2024 there is now also support for multi-GPU training using MPI and NCCL. Make sure you install MPI, e.g. on Linux:
sudo apt install openmpi-bin openmpi-doc libopenmpi-devand then:
make train_gpt2cu
mpirun -np <number of GPUs> ./train_gpt2cuThe fp32 version of the code does not support multi-GPU. This is because we want the GPT-2 fp32 version to become a nice educational endpoint of a CUDA optimization course. The mixed precision version is where we are doing the cutting edge development, so this is the version that supports multi-GPU training.
Now that the basic argparse and logging functionality is there in the .cu script, we can do our first learning rate sweeps. This is fairly manual right now, but just to document one example process to sweep learning rates on a machine with 4 GPUs on TinyStories. Run a shell script sweep.sh (after you of course chmod u+x sweep.sh):
#!/bin/bash
learning_rates=(3e-5 1e-4 3e-4 1e-3)
for i in {0..3}; do
export CUDA_VISIBLE_DEVICES=$i
screen -dmS "tr$i" bash -c "./train_gpt2cu -i data/TinyStories -v 250 -s 250 -g 144 -l ${learning_rates[$i]} -o stories$i.log"
done
# you can bring these down with
# screen -ls | grep -E "tr[0-3]" | cut -d. -f1 | xargs -I {} screen -X -S {} quitThis example opens up 4 screen sessions and runs the four commands with different LRs. This writes the log files stories$i.log with all the losses, which you can plot as you wish in Python. Here's a quick example script to plot the losses in a Jupyter notebook, obviously can become more sophisticated later:
import matplotlib.pyplot as plt
%matplotlib inline
def parse_log(logfile):
# look for lines like e.g. "s:100 tel:1.6952", step 100, val 1.6952
val_steps, val_losses = [], []
with open(logfile, "r") as f:
lines = f.readlines()
for line in lines:
if "tel" in line:
parts = line.split()
step = parts[0].split(":")[1]
loss = parts[1].split(":")[1]
val_steps.append(int(step))
val_losses.append(float(loss))
return val_steps, val_losses
results = [parse_log(f"stories{i}.log") for i in range(0, 4)]
for i, (val_steps, val_losses) in enumerate(results):
plt.plot(val_steps, val_losses, label="run {}".format(i))
plt.xlabel("steps")
plt.ylabel("loss")
plt.legend()A few more words on what I want this repo to be:
First, I want llm.c to be a place for education. E.g. our dev/cuda folder is a place for a library of kernels for all the layers that are manually hand-written and very well documented, starting from very simple kernels all the way to more complex / faster kernels. If you have a new kernel with various different tradeoffs, please feel free to contribute it here.
That said, I also want llm.c to be very fast too, even practically useful to train networks. E.g. to start, we should be able to reproduce the big GPT-2 (1.6B) training run. This requires that we incorporate whatever fastest kernels there are, including the use of libraries such as cuBLAS, cuBLASLt, CUTLASS, cuDNN, etc. I also think doing so serves an educational purpose to establish an expert upper bound, and a unit of measurement, e.g. you could say that your manually written kernels are 80% of cuBLAS speed, etc. Then you can choose to do a super fast run, or you can choose to "drag and drop" whatever manual kernels you wish to use, and run with those.
However, as a constraint, I want to keep the mainline llm.c in the root folder simple and readable. If there is a PR that e.g. improves performance by 2% but it "costs" 500 lines of complex C code, and maybe an exotic 3rd party dependency, I may reject the PR because the complexity is not worth it. As a concrete example - making cuBLAS for matmuls the default in the root training loop is a no-brainer: it makes the mainline code much faster, it is a single line of interpretable code, and it is a very common dependency. On the side of this, we can have manual implementations that can compete with cuBLAS in dev/cuda.
Lastly, I will be a lot more sensitive to complexity in the root folder of the project, which contains the main / default files of the project. In comparison, the dev/ folder is a bit more of a scratch space for us to develop a library of kernels or classes and share useful or related or educational code, and some of this code could be ok to be (locally) complex.
-
C#
-
CUDA C++
- llm.cpp by @gevtushenko: a port of this project using the CUDA C++ Core Libraries
- A presentation this fork was covered in this lecture in the CUDA MODE Discord Server
- llm.cpp by @gevtushenko: a port of this project using the CUDA C++ Core Libraries
-
Go
-
Java
- llm.java by @harryjackson: a Java port of this project
-
Metal
- llm.metal by @regrettable-username: LLM training in simple, raw C/Metal Shading Language
-
Mojo
-
Rust
-
Zig
- llm.zig by @saimirbaci: a Zig port of this project
Ways of organizing development:
- Experiencing a concrete issue with the repo? Use Issues.
- Have some code to contribute? Open a PR
- Chat about the repo, ask questions, etc.? Look at Discussions.
- Something faster? I created a new
#llmcchannel on my Zero to Hero Discord channel.
MIT