Escrcpy

📱 Display and control your Android device with a graphical interface of Scrcpy powered by Electron. 中文文档

Features

🏃 Synchronous: Benefit from web technologies to synchronize with Scrcpy faster
🤖 Automation: Auto-connect devices, auto-execute images, custom scripts, scheduled tasks
💡 Customization: Multi-device management, independent configurations, custom notes, config import/export
🔗 Reverse tethering: Gnirehtet reverse tethering
🎨 Themes: Light mode, dark mode, system-based switching
😎 Lightweight: Native support, only display device screen
⚡️ Performance: 30-120 fps depending on device
🌟 Quality: 1920×1080 or higher
🕒 Low latency: 35~70 ms
🚀 Quick startup: Display first image in about 1 second
🙅‍♂️ Non-intrusive: No installation residual left on Android device
🤩 User benefits: No account, no ads, no internet required
🗽 Free and open source

Get Software Packages

Check release addresses

Quick Start

USB Connection

Note: If the phone prompts for debugging authorization, click allow

Enable developer mode and USB debugging on your Android phone
Open Escrcpy and connect your Android phone to your computer
The device list in Escrcpy should have detected your phone, click start mirroring
Enjoy!

WIFI Connection

Note: Wireless debugging needs to be enabled on your phone's wireless debugging page to get the IP address (usually the IP assigned when connecting to WIFI) and port number (default 5555) of the device

Follow steps 1-2 in USB Connection
Input the device IP address and port number obtained to Escrcpy and click connect device
The device list in Escrcpy should have detected your phone, click start mirroring
Enjoy!

macOS && Linux

Note: These platforms do not come with integrated Scrcpy, you need to install them manually

Refer to the installation document for Linux
Refer to the installation document for macOS
Follow steps in USB Connection and WIFI Connection after dependencies are installed successfully

Gnirehtet Reverse Tethering

Note: macOS does not have Gnirehtet built-in. You need to manually install it to use this feature Installation Guide.

Gnirehtet is built into the Windows and Linux apps to provide reverse tethering from PC to Android devices.

Shortcuts

Refer to scrcpy/doc/shortcuts

Device Operation

Batch Processing

Batch Interception Screen
Batch Installation Application
Batch File Management
Batch Execution Script
Batch Scheduled Task

Control Model

Mirror
Recording
OTG
Camera
Custom

Device Interaction Bar

Switch
Home
Back
Notification
Power
Rotation
Volume
Screenshot
Reboot
Install APP
File Manager
Execution Script
Scheduled Task
Gnirehtet
Mirror Group

Preferences

Continuously improving. Currently supports the following common configurations

General

Theme
Language
File storage path
Adb path
Scrcpy path
Gnirehtet path
Scrcpy parameters
Auto-connect device
Auto-execute mirroring
Gnirehtet fix
Debug

Video Control

Disable video forwarding
Maximum size
Video bitrate
Refresh rate
Video codec
Display orientation
Screen cropping
Monitor
Video buffer
Receiver (v4l2) buffer

Device Control

Show touch points
Keep awake
Turn off screen during control
Turn off screen after control
Disable auto screen on during control
Simulate auxiliary display

Window Control

Window width
Window height
Window X-coordinate
Window Y-coordinate
Borderless mode
Fullscreen mode
Always on top
Disable screensaver

Audio Control

Disable audio forwarding
Keep device audio
Audio source
Audio codec
Audio bitrate
Audio buffer
Audio output buffer

Audio/Video Recording

Record video format
Record video orientation
Recording duration
Disable video playback
Disable audio playback

Input Control

Mouse mode
Mouse binding
Keyboard mode
Keyboard injection method

Camera Control

Camera source
Camera size
Camera ratio
Camera frame rate

Next Steps?

Priority from high to low:

Improved logo ✅
Software update feature ✅
Record and save audio/video ✅
Device quick interaction control bar ✅
Custom Adb and Scrcpy dependencies ✅
Custom device names ✅
Export and import preferences ✅
Individual device configuration ✅
macOS and Linux support ✅
Internationalization ✅
Dark mode ✅
Reverse tethering (Gnirehtet) ✅
Camera mirroring ✅
Multi-screen collaboration ✅
File push, screen rotation, audio control ✅
Batch connect historical devices ✅
Built-in terminal ✅
Auto-execute mirroring ✅
Flexible mirroring launch ✅
Batch processing ✅
Scheduled tasks ✅
Device grouping 🚧
File transfer assistant 🚧
Manage device files via interface 🚧
Game key mapping 🚧

FAQ

Computer cannot detect device after connecting

Please unplug and reconnect your device, and make sure the device has granted USB debugging authorization.
If it still doesn't work, your computer may be missing necessary drivers. Please install drivers using third-party tools such as DriverWizard and try again.

Unable to enter Chinese

This issue is known - Scrcpy doesn't seem to have tested and supported direct Chinese input. It's recommended to install a third-party input method on the phone that can well support, such as:

Sogou Input
QQ Input
Google Pinyin Input
Gboard

Wireless connection prompts: The target computer actively refuses access

The first wireless connection may require pairing. Alternatively, insert USB to ensure connection establishment and authorization success before using wireless.

Clicking wireless mode after connecting via data cable has no response

Please click again, or click refresh devices. Generally it will not exceed two clicks. If still not working, please provide device model and Android version to Issues

Why is the device interaction control bar not designed as an automatically sticking floating menu?

Adopting the floating menu approach will inevitably increase coupling with Scrcpy and difficulty in synchronization updates. Many similar ScrcpyGUI softwares had to invest a lot of effort in this approach and eventually gave up development due to update difficulties. Therefore, taking overall considerations, we decided to adopt the existing approach and look forward to Scrcpy's native support for an interaction control bar in the future.

Some devices can see screenshots after connecting but cannot operate

Note: For Xiaomi phones in particular, it requires not only enabling USB debugging but also enabling USB debugging (Security Settings), which is to allow modifying permissions or simulating clicks via USB debugging.

Please refer to the detailed instructions under Reasons why mouse and keyboard do not work

Downloading prompts antivirus detection causing unable to download normally

After feedback, Windows Defender may occasionally block the software packages from being downloaded due to lack of certificate signing. You can try the following solutions:

Open Windows Security Center.
Select Virus & threat protection.
In the Virus & threat protection settings, click Manage settings.
Find Real-time protection, you can try clicking Disable if permission allows. If unable to disable real-time protection, please skip this step.
Scroll down the page, find Exclusions, click Add or remove exclusions.
Add the folder path where you download the software packages as an exclusion item, i.e. add the folder to the Excluded list.

Failed to get device list or error when starting mirroring/recording

This is generally caused by an incorrect path for Adb or Scrcpy, you can try the following solutions:

In the menu, select Preferences and then click the reset configuration button in the top right corner of Global Mode.
Go to the Device List page and try enabling mirroring again.
Make sure you have downloaded and installed the latest version of Escrcpy.
Press Ctrl + Shift + I to open the developer tools and check for any error messages.
If there are errors, take a screenshot and submit your issue with the screenshot on the Feedback Issues page.

macOS window minimized to system tray icon not found

This is generally caused by too many icons in the system tray overflowing and hiding the Escrcpy icon. Try using the following tools:

After a successful installation of macOS, when I try to open it, I receive a prompt saying the file is damaged.

This is usually due to the software package not being signed. You can try the following solutions:

Open Terminal and execute sudo spctl --master-disable to allow software from any source.
Open Terminal and execute sudo xattr -r -d com.apple.quarantine [AppPath] to attempt fixing the damaged software package prompt.

Unable to locate the input point DiscardvirtualMemory on the dynamic link library Kernel32.dll.

Only support Windows 10 and above versions.

Audio capture exception causing mirroring failure.

This usually happens because your computer lacks audio output or you have a low Android version (Android 11+).

Please try disabling audio forwarding feature through the preferences settings to resolve this issue.

Microsoft Store version mirror startup error

This is caused by files in the installation directory lacking executable permissions.

You need to customize the file paths for scrcpy and adb (ensuring they have executable permissions). If using reverse tethering, configure gnirehtet similarly.

Getting Help

As this is an open source project run entirely by donations, support is limited and updates may not be on a fixed schedule.

Issues: Submit Feedback
Email: viarotel@qq.com

Acknowledgements

This project would not be possible without the following open source projects:

Support the Project

If this project has helped you, you can buy me a coffee to keep me energized and improving the project! 😛

Contributors

Thanks for all their contributions!

Yesouicom/escrcpy