ビーコン信号の送受信を行う。
Advertising ビーコン信号の送信を行う。
Create a Bluetooth low energy central and peripheral device, and allow them to discover each other and exchange data.
This sample shows how to transfer data between two iOS devices, with one acting as a Bluetooth central and the other as a peripheral, by using a CBCharacteristic on the peripheral side that changes its value. The value change is automatically picked up on the central side. The sample also shows how the central side can write data to a CBCharacteristic on the peripheral side.
This sample shows how to handle flow control in this scenario. It also covers a rudimentary way to use the Received Signal Strength Indicator (RSSI) value to determine whether data transfer is feasible.
-
Run the sample on two devices that support Bluetooth LE.
-
On one device, tap the “Central” button. This device will be the central mode device. The device will begin scanning for a peripheral device that is advertising the Transfer Service.
-
On the other device, tap the “Peripheral” button. This device will be the peripheral mode device.
-
On the peripheral mode device, tap the advertise on/off switch, to enable peripheral mode advertising of the data in the text field.
-
Bring the two devices close to each other.
The device running in central mode creates a CBCentralManager, assigning the CentralViewController as the manager’s delegate. It calls scanForPeripherals to discover other Bluetooth devices, passing in the UUID of the service it’s searching for.
centralManager.scanForPeripherals(withServices: [TransferService.serviceUUID],
options: [CBCentralManagerScanOptionAllowDuplicatesKey: true])When the central manager discovers a peripheral with a matching service UUID, it calls centralManager(_:didDiscover:advertisementData:rssi:). The sample’s implementation of this method uses the rssi (Received Signal Strength Indicator) parameter to determine whether the signal is strong enough to transfer data. RSSI values are provided as negative numbers, with a theortetical maximum of 0. The sample proceeds with transfer if the rssi is greater than or equal to -50. If the peripheral’s signal is strong enough, the method saves the peripheral as the property discoveredPeripheral and calls connect to connect to it.
func centralManager(_ central: CBCentralManager, didDiscover peripheral: CBPeripheral,
advertisementData: [String: Any], rssi RSSI: NSNumber) {
// Reject if the signal strength is too low to attempt data transfer.
// Change the minimum RSSI value depending on your app’s use case.
guard RSSI.intValue >= -50
else {
os_log("Discovered perhiperal not in expected range, at %d", RSSI.intValue)
return
}
os_log("Discovered %s at %d", String(describing: peripheral.name), RSSI.intValue)
// Device is in range - have we already seen it?
if discoveredPeripheral != peripheral {
// Save a local copy of the peripheral, so CoreBluetooth doesn't get rid of it.
discoveredPeripheral = peripheral
// And finally, connect to the peripheral.
os_log("Connecting to perhiperal %@", peripheral)
centralManager.connect(peripheral, options: nil)
}
}The device running in peripheral mode creates a CBPeripheralManager and assigns its PeripheralViewController as the manager’s delegate.
When the peripheralManagerDidUpdateState method indicates that Bluetooth has powered on, the sample calls a private setupPeripheral() method to create a CBMutableCharacteristic called transferCharacteristic. It then creates a CBMutableService from the characteristic and adds the service to the CBPeripheralManager.
private func setupPeripheral() {
// Build our service.
// Start with the CBMutableCharacteristic.
let transferCharacteristic = CBMutableCharacteristic(type: TransferService.characteristicUUID,
properties: [.notify, .writeWithoutResponse],
value: nil,
permissions: [.readable, .writeable])
// Create a service from the characteristic.
let transferService = CBMutableService(type: TransferService.serviceUUID, primary: true)
// Add the characteristic to the service.
transferService.characteristics = [transferCharacteristic]
// And add it to the peripheral manager.
peripheralManager.add(transferService)
// Save the characteristic for later.
self.transferCharacteristic = transferCharacteristic
}The user interface provides a UISwitch that starts or stops advertising of the peripheral’s service UUID.
@IBAction func switchChanged(_ sender: Any) {
// All we advertise is our service's UUID.
if advertisingSwitch.isOn {
peripheralManager.startAdvertising([CBAdvertisementDataServiceUUIDsKey: [TransferService.serviceUUID]])
} else {
peripheralManager.stopAdvertising()
}
}Once the central device discovers and connects to the peripheral, the peripheral side sends the data from the text field to the central. PeripheralViewController sends the data in chunks — each sized to the maximum value the central can receive — by setting the value of its transferCharacteristic property to the latest chunk. When finished, it sends the value EOM (for “end of message”).
Back on the central device, a call to the central manager delegate’s peripheral(_:didDiscoverCharacteristicsFor:Error: tells the app that it has discovered the peripheral’s transfer characteristic. The sample’s implementation of this method calls setNotifyValue(_:for:) to start receiving updates to the characteristic’s value.
When the value does update — meaning text is available — the central manager calls the delegate method
peripheral(_:didUpdateValueFor:error). The sample looks to see if the data is a chunk or an end-of-message marker. If the data is a chunk, the code appends the chunk to an internal buffer containing the peripheral’s message. If the data is an end-of-message marker, it converts the buffer to a string and sets it as the contents of the text field.
func peripheral(_ peripheral: CBPeripheral, didUpdateValueFor characteristic: CBCharacteristic, error: Error?) {
// Deal with errors (if any)
if let error = error {
os_log("Error discovering characteristics: %s", error.localizedDescription)
cleanup()
return
}
guard let characteristicData = characteristic.value,
let stringFromData = String(data: characteristicData, encoding: .utf8) else { return }
os_log("Received %d bytes: %s", characteristicData.count, stringFromData)
// Have we received the end-of-message token?
if stringFromData == "EOM" {
// End-of-message case: show the data.
// Dispatch the text view update to the main queue for updating the UI, because
// we don't know which thread this method will be called back on.
DispatchQueue.main.async() {
self.textView.text = String(data: self.data, encoding: .utf8)
}
// Write test data
writeData()
} else {
// Otherwise, just append the data to what we have previously received.
data.append(characteristicData)
}
}Once the transfer is complete, you can press the “Back” button on each device and reassign the central and peripheral roles, to perform the transfer in the opposite direction.
49e6a44 (Initial release)