Zwift bridge for Treadmills!
UI on Linux
UI on MacOS
- Domyos compatible
- Toorx TRX Route Key comaptible
- Zwift compatible
- Create, load and save train programs
- Measure distance, elevation gain and watts
- Gpx import (with difficulty slider)
- Realtime Charts
$ sudo apt upgrade && sudo apt update # this is very important on raspberry pi: you need the bluetooth firmware updated!
$ sudo apt install git libqt5bluetooth5 libqt5widgets5 libqt5positioning5 libqt5xml5 qtconnectivity5-dev qtpositioning5-dev libqt5charts5-dev libqt5charts5 qt5-default
$ git clone https://github.com/cagnulein/qdomyos-zwift.git
$ cd src
$ qmake
$ make -j4
$ sudo ./qdomyos-zwift
You will need to (at a minimum) to install the xcode Command Line Tools (CLI) thanks to @richardwait https://developer.apple.com/download/more/?=xcode
Download and install http://download.qt.io/official_releases/qt/5.12/5.12.9/qt-opensource-mac-x64-5.12.9.dmg and simply run the qdomyos-zwift relase for MacOs
-
Raspberry PI 0W and Domyos Intense Run
-
MacBook Air 2011 and Domyos Intense Run
-
Raspberry 3b+ and Domyos T900C
-
Raspberry 3b+ and Toorx TRX Route Key
run as
$ sudo ./qdomyos-zwift -no-gui
https://github.com/ProH4Ck/treadmill-bridge
https://www.livestrong.com/article/422012-what-is-10-degrees-in-incline-on-a-treadmill/