Zanduino/INA

Issues

• INA233 Addition

  #97 opened 2 years ago by eCtune
  0

• Wrong voltage reading with INA226

  #90 opened 2 years ago by TeguhTeknisi
  0

• Ina3221 alerts implementation

  #96 opened 2 years ago by kik-off
  0

• Shunt voltage calculation for INA260 uses wrong value

  #95 opened 2 years ago by hiornso
  0

• Shunt voltage of 0.2mV when there's no load

  #93 opened 2 years ago by flambert2
  0

• Multiple devices does not work properly

  #92 opened 2 years ago by johntaves
  3

• INA228 Support

  #77 opened 4 years ago by Agilitytime
  50

• Support for Atmega 4809

  #91 opened 3 years ago by JAGX13
  0

• add support for INA239

  #89 opened 3 years ago by hgatesCPV
  1

• Hi Zanduino, Is it Possible to Integrate the INA237 ? Our requirement is to support 85V .

  #78 opened 4 years ago by ajay2110
  4

• Power does not show negative values.

  #87 opened 3 years ago by Oleg-Sob
  4

• Use 0b111 instead of B111

  #86 opened 3 years ago by JMyrng
  5

• Settings for Shunt_Micro_Ohms and Max_Amps

  #75 opened 3 years ago by JCHPAUL
  2

• Max expected amps < 1A

  #81 opened 3 years ago by w407022008
  4

• Try to avoid EEPROM footprint

  #82 opened 3 years ago by ortegafernando
  1

• Copy & paste error in Wiki

  #80 opened 3 years ago by michael-brade
  4

• typo

  #79 opened 4 years ago by x3mEr
  1

• {"One-Line descriptive question title"=>"INA233"}

  #76 opened 4 years ago by JoseMartiRhombio
  1

• Trying to understand implementation of INA3221

  #67 opened 4 years ago by andyrbarrow
  21

• Allow an option for the library to not use EEPROM storage for INA-Structure information

  #72 opened 4 years ago by SV-Zanshin
  3

• INA3221 is supported, how to configure?

  #73 opened 4 years ago by rin67630
  7

• Optimize & Standardize library code

  #71 opened 4 years ago by SV-Zanshin
  0

• begin does not set values on subsequent calls

  #64 opened 4 years ago by johntaves
  7

• Add support for ultra low-power measurement

  #68 opened 4 years ago by Gallium70
  1

• Could you please give a full example for the code to run several INA modules?

  #69 opened 4 years ago by rin67630
  7

• How is power calculated?

  #70 opened 4 years ago by markusoestreicher
  6

• Possible error with INA226

  #66 opened 4 years ago by SV-Zanshin
  14

• Hardcode EEPROM size

  #62 opened 4 years ago by fg89o
  6

• [ESP8266] Conflict if EEPROM is used in main code.

  #41 opened 4 years ago by miky2k
  12

• Power calculation inconsistent between ina219 and ina3221

  #60 opened 4 years ago by sages
  7

• Implement "clang-format" to format c++ using a standard style

  #58 opened 4 years ago by SV-Zanshin
  1

• Change case of the "Alert..." functions

  #57 opened 4 years ago by SV-Zanshin
  2

• Function "getBusMicroWatts" limited to +/- 2147 Watts

  #56 opened 5 years ago by SV-Zanshin
  0

• Accommodations for bigger current and power

  #54 opened 5 years ago by we9v
  12

• Duplicate conversion triggering

  #55 opened 5 years ago by nathancheek
  1

• Doxygen changes need to be made to avoid errors

  #53 opened 5 years ago by SV-Zanshin
  1

• begin() only looks for 15 devices

  #51 opened 5 years ago by nathancheek
  1

• Add a tips about MaxBusAmps

  #50 opened 5 years ago by alphaarea
  1

• EEPROM.h doesn't get loaded on STM32F1xx devices

  #49 opened 5 years ago by Steamerzone
  3

• Will not compile for Teensy

  #47 opened 5 years ago by nathancheek
  0

• Change maxBusAmp ::begin parameter from Amp to mA

  #46 opened 5 years ago by seurat-atreides
  3

• No way to check ConversionReadyFlag only waitForConversion is possible.

  #43 opened 5 years ago by miky2k
  3

• Wrong VBUS Reading

  #45 opened 5 years ago by jobitjoseph
  13

• Initializing INA device does reset RTC DS3231M (RTClib)

  #42 opened 5 years ago by AnthonyPapageo
  2

• Incorrect bit mask for INA226_CONFIG_SADC_MASK

  #40 opened 6 years ago by mattlogic
  1

• getId() to return dec/Hex value of the Id

  #38 opened 6 years ago by novski
  5

• Change EEPROM functionality for non-AVR systems

  #39 opened 6 years ago by SV-Zanshin
  1

• Implement automated doxygen documentation using Travis-CI

  #37 opened 6 years ago by SV-Zanshin
  1

• Integrate with Travis-CI

  #36 opened 6 years ago by SV-Zanshin
  2

• getBusMicroAmps giving 2x actual current on a INA226

  #35 opened 6 years ago by bramhut
  6