Lily58 Base.ai, Lily58 Switch.ai, Lily58 Wall.ai- with M3 screw&standoff holes
Lily58 revision2 - centered.ai - Centered on workspace for acrylic cutting
Lily58 revision3 - without oled.ai - Removed oled/mcu window
Lily58 revision4 - without oled screw hole.ai- Removed oled/mcu window's screw holes
This case was inspired by FateNozomi. The case was not designed originally for the use of Ponoko, and I reused some parts from my original kit for the oled cover. Before uploading my designs, I figured I should make it Ponoko ready. Disclaimer: Keyboard in photos were not cut from Ponoko. Use these files at your own risk. OLED standoffs in the pictures are from the Lily58 kit I purchased.
We humbly ask that you credit this repository whether in use private or commercial. We implore you to read and understand the license before use.
If you want to ask me any questions, message me on reddit as I am more active there. My username is u/blessedsodiepop.
- Upload the .ai file to Ponoko and 3mm acrylic in your choice of acrylic. Mine is Clear Matte Acrylic.
| Material | Quantity |
|---|---|
| M2.5 * 5mm SCS2.5 screws | 24 |
| M2.5 * 6mm HARWIN R25-1000602 standoff | 10 |
| M2.5 * 10mm HARWIN R25-1001002 standoff | 4 |
| This design uses M2.5 screws and standoffs. Feel free to modify the screw and standoff hole design accommodate your needs. |