Usage: treehouses [command] ...
Commands:
help [command] gives you a more detailed info about the command or will output this
expandfs expands the partition of the RPI image to the maximum of the SDcard
rename <hostname> changes hostname
password <password> changes the password for 'pi' user
sshkeyadd <public_key> adds a public key to 'pi' and 'root' user's authorized_keys
version returns the version of cli.sh command
image returns version of the system image installed
detectrpi detects the hardware version of a raspberry pi
ethernet <ip> <mask> <gateway> <dns> configures rpi network interface to a static ip address
wifi <ESSID> [password] connects to a wifi network
staticwifi <ip> <mask> <gateway> <dns> configures rpi wifi interface to a static ip address
<ESSID> [password]
bridge <ESSID> <hotspotESSID> configures the rpi to bridge the wlan interface over a hotspot
[password] [hotspotPassword]
container <none|docker|balena> enables (and start) the desired container
bluetooth <on|off> switches between bluetooth hotspot mode / regular bluetooth and starts the service
ap <local|internet> <ESSID> [password] creates a mobile ap, which has two modes: local (no eth0 bridging), internet (eth0 bridging)
timezone <timezone> sets the timezone of the system
locale <locale> sets the system locale
ssh <on|off> enables or disables the ssh service
vnc <on|off> enables or disables the vnc server service
default sets a raspbian back to default configuration
wificountry <country> sets the wifi country
upgrade upgrades cli.sh package using npm
sshtunnel <add|remove|show> helps adding an sshtunnel
<portinterval> [user@host]
led [green|red] [mode] sets the led mode
rtc <on|off> [rasclock|ds3231] sets up the rtc clock specified
ntp <local|internet> enables or disables time through ntp servers
wifi - ESSID is the SSID or the network name of your wireless network and password is the password
for the corresponding network.
rename - The hostname is a label assigned to the RPI device for identification on a network and
is useful for communication amongst different devices. The default hostname is raspberrypi.
ethernet and staticwifi - before using these command, I checked that my network follows the ip range from
192.168.0.1 to 192.168.0.254. To change my ip address to 192.168.0.251, I can
issue the command below given that my router is found at 192.168.0.1 and
that it is also a dns server. Alternatively, you can use Quad9 or CloudFlare's dns server,
which is 9.9.9.9 or 1.1.1.1.
> ethernet 192.168.0.251 255.255.255.0 192.168.0.1 192.168.0.1