vehicle-information-service-spec prototype README

last update: March 22, 2017

W3C Automotive WG Vehicle Information Service Specification
prototype implementation by ACCESS

Tested with:

ubuntu14.04 LTS
node v7.3.0 / npm 3.10.10 #older version should work but not tested
ws v2.0.3 or newer #necessary for using sub-protocol

To use:

0.Prerequiste

Install node v7.3.0
Install npm v3.10.10

1.Clone

git clone https://github.com/aShinjiroUrata/vehicle-information-service-spec.git`
cd vehicle-information-service-spec`

2.Install npm packages

$npm install fs http ws websocket socket.io socket.io-client
$npm install -g http-server forever

3.Edit svr_config.js

Default IP address for VISS prototype is '127.0.0.1'.
Change the IP address by modifying VISS_IP in case you need (such as you put VISS on public internet).
Default IP address for mockDataSrc is '127.0.0.1'.
Change the IP address by modifying DATASRC_IP in case you need.
As default, should be same with VISS_IP.
If mockDataSrc.js or other data source resides in a different server, use its IP.

Update port number if necessary.
In default setting, below port numbers will be used.

- VISS server port number: VISS_PORT = 3000 @svr_config.js
- mockDataSrc.js port number: DATASRC_PORT = 3001 @svr_config.js
- http server port number: 8081 @start.sh

If any of these are already occupied, please change to available port number

4.start VISS server

$./start.sh`

(This script starts 'mock data source', 'VISS server', 'http-server'.)

5.Open test-ui WebApp by browser with below url

http://{VISS_IP}:8081/test-ui.html

6.stop VISS server, mock data source server, node's web server

$./stop.sh

Support status

Support:

get method basic function
set method basic function
subscribe method basic function
unsubscribe method
unsubuscribeAll method
authorize method basic function
getVSS method basic function
use from multiple client
Specifying path in getVSS method

Not support: